Thanks for that.
By the way, this seems to work also, which is more consistent between IPv4 &
IPv6:
set routing-options rib inet.0 protect core
set routing-options rib inet6.0 protect core
________________________________________________________________________
Jay Ford, Network Engineering, University of Iowa
On Tue, 21 Nov 2017, [email protected] wrote:
For ipv6
set routing-options rib inet6.0 protect core
For ipv4
set routing-options protect core
David Roy
IP/MPLS NOC engineer - Orange France
Ph. : +33 2 99 28 57 66
Mob. : +33 6 85 52 22 13
SkypeID : davidroy.35
[email protected]
JNCIE x3 (SP #703 ; ENT #305 ; SEC #144)
-----Message d'origine-----
De : juniper-nsp [mailto:[email protected]] De la part de Jay
Ford
Envoyé : mardi 21 novembre 2017 22:07
À : [email protected]
Objet : [j-nsp] BGP PIC for inet6
There is Juniper documentation acknowledging the use case of BGP PIC for inet &
inet6 unicast, but I can't find a way to enable it for inet6 at Junos 16.2R2.8.
Pointers to how to do so would be cool, but confirmation that it isn't supported
(yet) would also be appreciated.
________________________________________________________________________
Jay Ford, Network Engineering, University of Iowa
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
