Hello Michael, thank you for your response. Though I have not spoken before, after all this issues, I have tried upgrading the JunOS 13 to 15 but even so, our router is still unable to recognize the FPC/MICs etc. So I don't think it has been corrupted, thus I believe the firmware of the AFEB is corrupt as it doesn't show anything under show chassis firmware:
> show chassis firmware Part Type Version AFEB Regards, Caio On Tue, Dec 26, 2017 at 12:55 AM, Michael Hare <michael.h...@wisc.edu> wrote: > Hello- > > Did your factory default include doing a install-media from front facing > USB? I might suggest carefully looking at boot sequence for logs > indicating possible package corruption. > > While I haven't had the exact problem you describe we have a > 25% failure > (data corruption) rate on our MX104 REs manifesting themselves in all sorts > of ways. We have caught some of this corruption by doing a sha1 checksum of > tgz files in the package directory but we've also seen things like our > /etc/services file corrupt, locking us out of SSH. > > -Michael > > > -----Original Message----- > > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf > > Of Caio > > Sent: Thursday, December 21, 2017 6:32 PM > > To: juniper-nsp <juniper-nsp@puck.nether.net> > > Subject: [j-nsp] MX104 won't recognize fpc, mpc and onboard interfaces > > > > Hello there, > > > > We had a MX104 router in production for a very long time and recently we > > replaced it with a brand new MX480 and we took it to our lab in order to > > load the default configuration on it and start to configure it over to > > another POP. > > However, after the factory default it won't recognize the FPC anymore > > and/or any inserted MIC or even the onboard SFP+ interfaces. > > > > The license seems to be ok (I will attach the show licenses output below) > > and I couldn't find anything to brought it back online, I have tried to > > push the Online button with a paper clip and through the command request > > chassis fpc / mic online and nothing... > > Has anyone been through something like that? > > Can anyone shed a light on it ? > > > > Thanks in advance. > > > > *PS:* By looking through the log files I've found just these unusual > > strings: > > ed_chmic ifpfed_controller ifpfed_ds0 ifpfed_ds1e1 ifpfed_ds3e3 > > ifpfed_ethkldload: can't load /modules/ifpfe_drvLoading POS driver > > /ifpfed_eth.ko: Exec format error > > > > and > > > > CHASSISD_IFDEV_DETACH_FPC: ifdev_detach_fpc(0) > > Dec 21 20:30:07 2017 RT_SRR-CORE chassisd[1556]: > > CHASSISD_IFDEV_DETACH_FPC: ifdev_detach_fpc(1) > > Dec 21 20:30:07 2017 RT_SRR-CORE chassisd[1556]: > > CHASSISD_IFDEV_DETACH_FPC: ifdev_detach_fpc(2) > > > > Command outputs below: > > > > > show system license usage > > > > Licenses Licenses Licenses > Expiry > > > > Feature name used installed needed > > > > scale-subscriber 0 1000 0 > > permanent > > > > scale-l2tp 0 1000 0 > > permanent > > > > scale-mobile-ip 0 1000 0 > > permanent > > > > MX104-2x10Gig-port-0-1 0 1 0 > > permanent > > > > MX104-2x10Gig-port-2-3 0 1 0 > > permanent > > > > > > > show chassis fpc > > > > Temp CPU Utilization (%) CPU Utilization (%) > > Memory Utilization (%) > > > > Slot State (C) Total Interrupt 1min 5min 15min > DRAM > > (MB) Heap Buffer > > > > 0 Empty > > > > 1 Empty > > > > 2 Empty > > > > > request chassis pic fpc-slot 0 pic-slot 0 online > > > > FPC slot 0 is empty > > > > > > > request chassis pic fpc-slot 1 pic-slot 0 online > > > > FPC slot 1 is empty > > > > > request chassis pic fpc-slot 2 pic-slot 0 online > > > > FPC slot 2 is empty > > > > > show chassis hardware > > > > Hardware inventory: > > > > Item Version Part number Serial number Description > > > > Chassis XXXXX MX104 > > > > Midplane REV 51 750-XXXXXX CAEXXXXX MX104 > > > > PEM 0 REV 05 740-XXXXXX XXXXXXXXXX DC Power Entry > > Module > > > > PEM 1 REV 05 740-XXXXXX XXXXXXXXX DC Power Entry > Module > > > > Routing Engine 1 REV 09 750-XXXXXX CAFBXXXXX RE-MX-104 > > > > AFEB 0 BUILTIN BUILTIN Forwarding > Engine > > Processor > > > > Fan Tray 0 REV 03 711-XXXXXX CAET8414 Fan Tray > > > > > show interfaces terse > > > > Interface Admin Link Proto Local Remote > > > > dsc up up > > > > em0 up up > > > > em0.0 up up inet 10.0.0.5/8 > > > > 128.0.0.1/2 > > > > 128.0.0.5/2 > > > > inet6 fe80::201:ff:fe00:5/64 > > > > fec0::a:0:0:5/64 > > > > tnp 0x5 > > > > em1 up up > > > > fxp0 up down > > > > gre up up > > > > ipip up up > > > > jsrv up up > > > > jsrv.1 up up inet 128.0.0.127/2 > > > > lo0 up up > > > > lo0.16384 up up inet 127.0.0.1 --> 0/0 > > > > lo0.16385 up up inet > > > > lsi up up > > > > me0 up up > > > > mtun up up > > > > pimd up up > > > > pime up up > > > > pp0 up up > > > > tap up up > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp