On Apr 17, 2018, at 2:03 AM, Mohammad Khalil <eng.m...@gmail.com> wrote: > > Hi all > > I have configured an IPSEC between my SRX210 and a provider who will > provide monitoring services > The IPSEC is up and running and I can reach from my internal servers (LAN) > to their monitoring servers (remote LAN) via ICMP , but they cannot pull > any data through my SNMP > I have configured the needed (I guess!) and do not know what is blocking > data polling > > *set snmp community bbc2k4 clients 65.198.233.4/32 > set security zones security-zone untrust interfaces > st0.1 host-inbound-traffic system-services snmpset security zones > security-zone untrust interfaces st0.1 host-inbound-traffic system-services > snmp-trap* > If you don't have it, I think you probably need some security policy to allow the traffic through the SRX.
-- Louis Kowolowski lou...@cryptomonkeys.org <mailto:lou...@cryptomonkeys.org> Cryptomonkeys: http://www.cryptomonkeys.com/ <http://www.cryptomonkeys.com/> Making life more interesting for people since 1977 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp