Hı James. We get now acx5048 and problem solved :)
Same config works fine on the ACX5048. So there is hardware/software or architecture problem on the Acx5096. jtac is busy with the investigation. Thanks for your help. Br ap Op wo 2 mei 2018 om 10:23 schreef James Bensley <jwbens...@gmail.com> > On 1 May 2018 at 17:07, A. Camci <avciguz...@gmail.com> wrote: > > does anyone have an idea why it does not work on Acx( vrf+ vrrp). > > > > Br ap > > How have you tried to debug this set up? > > From your original em ail:"maybe vrf+vrrpdoesnt work on a ACX." - Have > you confirmed this, are you trying something that isn't > supported/supposed to work? > > "after migration to the ACX has customer no connection from the VRF. > if we switch back to cisco, everything works fine" - How are you > verifying this? > > When ACX is master have you checked ARP and MAC tables to see that > physically traffic is being forwarded to the ACX? > > Is there a switch inbetween, correct VLANs are allowed on the correct > ports? Are the MAC tables updated after master switch over? > > Have you checked the interface counters on the ACX to see that traffic > is coming into the ACX? > > Can you run a packet capture on the ACX to see it is the correct > traffic? Can you mirror the switch ports to check there too? > > Do you see any drop counters on the ACX? > > What have you actually done to debug this issue? > > Cheers, > James. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp