Hey! I am a bit puzzled how to do VLAN rewriting with the QFX5100. With a MX, the following configuration would work:
interfaces { xe-0/0/0 { unit 0 { family bridge { interface-mode trunk; vlan-id-list [ 57 58 ]; vlan-rewrite { translate 3 57; translate 4 58; } } } } } With a QFX5100, running 17.4, there is no "vlan-id-list" under "family ethernet-switching" (but there is "inner-vlan-id-list" and there is "vlan-id-list" outside "family ethernet-switching"). If I don't specify anything, I get an error message saying to use "vlan members". However, the following configuration does not translate VLANs: interfaces { xe-0/0/0 { unit 0 { family ethernet-switching { interface-mode trunk; vlan members [ vlan-57 vlan-58 ]; vlan-rewrite { translate 3 57; translate 4 58; } } } } } vlans { vlan-57 vlan-id 57; vlan-58 vlan-id 58; } Am I doing something wrong? Thanks! -- Choose a data representation that makes the program simple. - The Elements of Programming Style (Kernighan & Plauger) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp