Hi
I’m trying setup dynamic VPN (using 18.1R1.9) on SRX 300 - I want to have
access from internet to my home network.
First, I’m confused about vpn client. Should I use Junos Pulse? I’t looks like
not supported by Juniper right now (latest version is from 2015). Should I use
Pulse Secure?
I’ts possible to use „native” vpn client from mac os x or Windows? I also
found information that Dynamic VPN is not supported on new SRX boxes.
If it still supported, where I can find newest documentation how to correctly
setup?
Of course I tried confgiure vpn tunel but without success. Below, fragment form
logs / trace debug:
[May 21 10:48:38]IKEv1 packet R(<none>:500 <- xx.xx.xx.xx :500): len= 40,
mID=125b77cb, HDR, N(NO_PROPOSAL_CHOSEN)
[May 21 10:48:38]ike_st_i_n: Start, doi = 1, protocol = 1, code = No proposal
chosen (14), spi[0..0] = 00000000 00000000 ..., data[0..0] = 00000000 00000000
...
[May 21 10:48:38]<none>:500 (Responder) <-> xx.xx.xx.xx:62252 { c14a7f01
1d013489 - 82bf44a1 0fddfa77 [0] / 0x125b77cb } Info; Received notify err = No
proposal chosen (14) to isakmp sa, delete it
Where I can find some examples of proper configuration dynamic vpn for actual
version of Junos?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
