We encountered this on T1600 chassis.
After months troubleshooting, i discovered myself it is due to some
monitoring system were still polling using snmp v1. After all changed to
v2c. Problem resolved.
As usual JTAC would suspect here and there, and luckyly i have another
chassis with identical software / config but not affected as comparison.

On Wed, 18 Jul 2018 at 14:37, Gert Doering <g...@greenie.muc.de> wrote:

> Hi,
>
> On Wed, Jul 18, 2018 at 02:50:13AM +0000, Richard McGovern wrote:
> > As well the really important stuff comes after the sale, not before.
>
> Yeah.  JTAC really excels on this.
>
> (We have an open case where SNMP on *some* EX4600 is abysmally slow while
> the same queries on other EX4600 with the same software / SNMP config
> behave quite normally.  Not proceeding in meaningful ways since half
> a year...)
>
> gert
> --
> "If was one thing all people took for granted, was conviction that if you
>  feed honest figures into a computer, honest figures come out. Never
> doubted
>  it myself till I met a computer with a sense of humor."
>                              Robert A. Heinlein, The Moon is a Harsh
> Mistress
>
> Gert Doering - Munich, Germany
> g...@greenie.muc.de
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to