I think 16.1 was first. ps Haux|grep rpd should show multiple rpd lines.
Also y...@r41.labxtx01.us.bb> show task io |match { KRT IO task 0 0 0 0 0 {krtio-th} krtio-th 0 0 0 0 0 {krtio-th} krt ioth solic client 0 0 869 0 0 {krtio-th} KRT IO 0 0 0 0 0 {krtio-th} bgpio-0-th 0 0 0 0 0 {bgpio-0-th} rsvp-io 0 0 0 0 0 {rsvp-io} jtrace_jthr_task 0 0 0 0 0 {TraceThread} I'd just go latest and greatest. On Thu, 13 Sep 2018 at 12:13, tim tiriche <tim.tiri...@gmail.com> wrote: > > .o issues with convergence or suboptimal paths. The noc is constantly seeing > high cpu alerts and that was concerning. Is this normal in other networks? > > Running 14.1R7.4 with mx480/240 mix. > I usually follow the code listed here: > https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476 > > Which code version have these optimization happened in? > > > On Wed, Sep 12, 2018 at 2:11 AM Saku Ytti <s...@ytti.fi> wrote: >> >> Hey Tim, >> >> I'd optimise for customer experience, not CPU utilisation. Do you have >> issues with convergence time, suboptimal paths? >> >> Which JunOS you're running? There are quite good reasons to jump in >> recent JunOS for RSVP, as you can get RSVP its own core, and you can >> get make-before-break LSP reoptimisation, which actually works >> event-driven rather than timer based (like what you have, causing LSP >> blackholing if LSP convergence lasts longer than timers). >> >> >> >> >> On Wed, 12 Sep 2018 at 08:05, tim tiriche <tim.tiri...@gmail.com> wrote: >> > >> > Hi, >> > >> > Attached is my MPLS Auto B/w Configuration and i see frequent path changes >> > and cpu spikes. I have a small network and wanted to know if there is any >> > optimization/best practices i could follow to reduce the churn. >> > >> > protocols { >> > mpls { >> > statistics { >> > file mpls.statistics size 1m files 10; >> > interval 300; >> > auto-bandwidth; >> > } >> > log-updown { >> > syslog; >> > trap; >> > trap-path-down; >> > trap-path-up; >> > } >> > traffic-engineering mpls-forwarding; >> > >> > rsvp-error-hold-time 25; >> > smart-optimize-timer 180; >> > ipv6-tunneling; >> > optimize-timer 3600; >> > label-switched-path <*> { >> > retry-timer 600; >> > random; >> > node-link-protection; >> > adaptive; >> > auto-bandwidth { >> > adjust-interval 7200; >> > adjust-threshold 20; >> > minimum-bandwidth 1m; >> > maximum-bandwidth 9g; >> > adjust-threshold-overflow-limit 2; >> > adjust-threshold-underflow-limit 4; >> > } >> > primary <*> { >> > priority 5 5; >> > } >> > } >> > _______________________________________________ >> > juniper-nsp mailing list juniper-nsp@puck.nether.net >> > https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> >> >> -- >> ++ytti -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp