Hey Rolf, No that's not it, that's difference between Q and non Q card. All three generations had HQoS support:
1) MPC (Trio 1.0) 2) MPCE 3) MPCE--NG I'm not sure about difference, MPCE I believe got better oscillator for timing and I think more linecard cpu dram for higher subscriber scale. I don't know what NG got. I wouldn't be surprised if they were also respins with newer Trio, as cost reduction (E==1.5? NG==2.0?). I'd also love to have definitive answer of changelog between each generation. On Fri, 19 Oct 2018 at 22:34, "Rolf Hanßen" <n...@rhanssen.de> wrote: > > Hello, > > as far as I see the feature difference is HQoS: > https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/mpc-mx-series-mpc2e-features.html > > regards > Rolf > > > Hi list, > > > > Can anyone tell me the differences in scaling or features of the > > MPC2E-3D-NG-R-B vs MPC2E-3D-R-B. I know the NG requires an SBCE2. > > > > Thanks, > > > > Kevin > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp