I use the per-vrf dhcp-relay in ACX5048 Aaron
> On Dec 19, 2018, at 5:41 PM, Chris Cappuccio <ch...@nmedia.net> wrote: > > Nathan Ward [nw...@daork.net] wrote: >> Hi Chris, check out the forward-only-replies option, pretty sure there was >> some stuff there I had to fiddle with. >> >> Can you post your config? >> > > I'm using the bootp helper instead of the dhcp-relay feature. I don't know > if 'fud' handles both. When I tried using dhcp-relay, my remote PEs stopped > receiving DHCP replies. The router connected to the dhcp server would eat the > replies and they would never reach the remote PE router, despite the > interface that the DHCP server connects to not having any relay enabled. > Since it is a production network I stopped using dhcp-relay until I look > further into the documentation.. > > Chris > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp