Perhaps encapsulation vlan instead may help.
On 27-Dec-18 23:40, Fraser McGlinn wrote:
Further to this, and to clarify I do already have tunnel-services enabled and after configuring I get output packets on each unit, but no input packets. It seems like the PFE is just eating the packets.
fraser@> show configuration | display set | match lt-0/0/0 set interfaces lt-0/0/0 unit 100 encapsulation ethernet set interfaces lt-0/0/0 unit 100 peer-unit 101 set interfaces lt-0/0/0 unit 100 family inet address 100.64.0.1/30 set interfaces lt-0/0/0 unit 101 encapsulation ethernet set interfaces lt-0/0/0 unit 101 peer-unit 100 set interfaces lt-0/0/0 unit 101 family inet address 100.64.0.2/30 set routing-instances TEST interface lt-0/0/0.101
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp