Maybe try layer2-unicast-replies?
On Wed, Jan 16, 2019 at 08:38:34AM -0500, Michael Davis wrote: > We use SRX's in pkt mode at some remote sites that don't need full blown > VPN/FW > security, mostly older SRX100s and SRX240s. We've recently installed a > SRX1500 > at a larger site and everything works as expected, except none of the > VoIP phones > are getting their addresses from the dhcp relay. We have 6 VLANs on > site and all > of them get dhcp as expected, except the VoIP phones. Putting a laptop > on the > VoIP VLAN gets an IP correctly. Monitoring and mirroring the VLAN shows > the dhcp > reply packets being broadcast to the IRB, but the phones just stay in > the selecting > state in the binding table. > > This is the first SRX running the JDHCP code levels so that's suspect, > but can't for > the life of me see why only the phones are having issues. > > We were running the recommended 15.1X49-D150.2 and I upgraded this morning > to 15.1X49-D160.2 without any change. > > Has anyone run into such an issue before? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp