After bringing up the same config (Expect we use LR4 Optics) and same OS level 
for over 12 setups in the past 2 months we did run into one problem that looks 
similar to this.  We would get a link light but the interface would remain down 
  

First  Make sure to check to see if you are seeing light on both ends using the 
show interfaces diagnostics optics command .  If not then something is wrong 
with the cable or optic.   We never had to activate anything outside the MPC 
card when it was inserted.

In our case we would see light on both ends but both sides the interface on 
both sides would remain down.   We had to do a disable on just one side of the 
link and then reenable it and then the interfaces on both sides would come 
online.   This happened in 10 of the 12 connections.  And also we only ever had 
to do this once when everything was when the cable was first plugged in even if 
the cards had been plugged in for weeks..  We have since unplugged, pulled 
cards out, rebooted the entire chassis though a full power off and never had to 
do the disable trick again for that connection.       I was up to this point 
blaming the infernia gear in the middle.

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of 
Jerry Jones
Sent: Wednesday, January 30, 2019 4:38 AM
To: Dave Peters - Terabit Systems <d...@terabitsystems.com>
Cc: juniper-nsp@puck.nether.net
Subject: Re: [EXT] [j-nsp] MIC3-3D-1X100GE-CXP ports won't light up.

Simple - but did you turn on the laser?


On Jan 29, 2019, at 4:16 PM, Dave Peters - Terabit Systems 
<d...@terabitsystems.com> wrote:

Hi all--

New to this particular MIC. I've got two Juniper MX480s running RE-S-1800x4s 
with 15.1R7.9 on SCBE2s with MPC3E cards, and I'm trying to use 
MIC3-3D-1X100GE-CXP with CXP-100GBASE-SR10 transceiver. 

First time, like I said. Got a 24 Fiber MTP Cable, Multimode OM3, 100Gb Female 
to Female 50/125, OFNP, Pin 1-13 cable.

The ports don't light up or go "up," but the MPCs, MICs, and transceivers are 
recognized. I'm clearly missing something. Can anyone take some pity on me, 
here? As always, much appreciated.

--Dave Peters
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net 
https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net 
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to