Then you should open a ticket with the JTAC.
-----
Alain Hebert aheb...@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 2/14/19 11:57 AM, Giovanni Bellac via juniper-nsp wrote:
Hi,
it matters for us, because I want to know the root cause of the red alarm LED
when powering it down with an enabled management port.
Kind regards
Am Donnerstag, 14. Februar 2019, 13:12:13 MEZ hat Anderson, Charles R
<c...@wpi.edu> Folgendes geschrieben:
Why does it matter since the switch is halted/powered off anyway?
On Thu, Feb 14, 2019 at 08:31:43AM +0000, Giovanni Bellac via juniper-nsp wrote:
Hi,
we are issuing the command (request system power-off) when the switch is booted
up normally. We are experiencing this on different JunOS versions (14.1, 17.3,
18.1).
From our last email:
Short update:We experiencing the red alarm only when the management port is
connected when powering off the QFX5100-48T - weird...When the management port
is not connected when powering down the device, there is no red alarm.
Kind regards
Am Mittwoch, 13. Februar 2019, 16:22:59 MEZ hat Anderson, Charles R
<c...@wpi.edu> Folgendes geschrieben:
On Wed, Feb 13, 2019 at 11:08:16AM +0000, Giovanni Bellac via juniper-nsp wrote:
after powering off a QFX5100-48T (request system power-off) the fans are
spinning down and the ALARM LED is lightning red. The switch is working and
looking as expected without any error messages.
Is this a normal behavior ? Has someone a spare unit for a short test ?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
