Hi,
Am 12.04.2019 um 22:10 schrieb Aaron Gould:
Trying to do fusion from MX204 (AD) to QFX5120-48Y-8C (SD). but getting this
message.. "Satellite image not available"
Is a QFX5120-48Y-8C capable of being a satellite device in fusion ?
Not yet.
https://www.juniper.net/documentation/en_US/junos/topics/concept/fusion-components.html
Fusion PE supports EX4300, QFX5100/5110 and QFX5200
Interesting side Note on QFX5200 being supported as Satellite and my favorite
Fun Fact on Fusion PE. MX80 is supported as AD and QFX5200 is supported as SAT.
This allows us to build the most useless router in the world with 248x100GE
Interfaces (31x100GE on 8 QFX5200) + 24x10GE Interfaces (1x100GE broken into
3x10GE + 1x10GE for AD Connectivity) with a oversubscription factor of at least
2483:1 per SAT and MX80 control plane. The worst of all worlds!
Similar Math applies to MX104 as AD.
--
Kind Regards
Tobias Heister
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp