Hello,
On 01/07/2019 15:38, Guillermo Fernando Cotone wrote:
Our use-case is to connect BGP islands through an EVPN backbone, and we
expect BGP attributes, such as communities, to be propagated over the
backbone. Pretty much standard IP-VPN behavior. Also referenced here:
https://tools.ietf.org/html/draft-rabadan-sajassi-bess-evpn-ipvpn-interworking-02#section-4.2
I'm not sure if this is actually supported on Juniper. We're
running 17.3R3-S2.2.
Are You terminating PE-CE BGP on IRB interface on PE side? This is
supported from 19.2R1
https://www.juniper.net/documentation/en_US/junos/information-products/topic-collections/release-notes/19.2/jd0e4828.html#jd0e4903
Thanks
Alex
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
