Gents, good day. Since Juniper, with no respect, removed a feature from QFX5100 platform - l2circuits over AE subinterfaces, version 14.1X53-D42.3 is the last one where the feature are enable and JTAC now, doesn’t provide support anymore, since is an old version. I use on these boxes, Ethernet-CCC, Vlan-CCC in phy or AE ports. RSVP/ISIS/MPLS enabled. Now I stuck to move with theses QFX since new versions of software or hardware(5110 or 5120) doesn't have the feature. But I need to purchase lot of switches for new facilities and make some upgrades of capacity of the working facilities.
Did you guys knows switches 48ports 1/10Ge, 4 or 6ports 40/100Ge able to do the same thing and Juniper compatible? I am working almost one year with SE to try to solve this problem... Below, part of configuration: Model: qfx5100-48s-6q Junos: 14.1X53-D42.3 ae1 { description "CR-00280 - L3 - sw02-metro-osc ae0"; flexible-vlan-tagging; mtu 8000; encapsulation flexible-ethernet-services; aggregated-ether-options { lacp { active; } } unit 3 { description "nononono"; encapsulation vlan-ccc; vlan-id 3; } unit 552 { description " nonononono"; vlan-id 552; family inet { address 10.7.16.85/30; } } unit 1354 { description "nononononono"; encapsulation vlan-ccc; vlan-id 1354; } unit 2275 { description "nonononononono"; encapsulation vlan-ccc; vlan-id 2275; } suporte@sw03-mpls-osc# set interfaces ae15 encapsulation ? Possible completions: ethernet-bridge Ethernet layer-2 bridging extended-vlan-bridge VLAN layer-2 bridging flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration error: invalid value: ae15 L2circuit over AE interface is not supported on QFX5k platforms. suporte@sw03-mpls-osc# set protocols l2circuit neighbor 177.115.1.71 interface ae15. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp