Thanks for all the replies. Managed to upgrade 17 units. So I'm sharing - my path for that upgrade: 10.4R -> 13.3R -> 15.1R -> 18.4R
Just ensured there is enough space on /var partition (remove unused files in /var/tmp and old junos in /var/pkg/sw) Rob On Mon, Jun 15, 2020 at 6:41 PM Leon Kramer <leonkra...@gmail.com> wrote: > Hi, > > +1 for recommending doing a backup of config, a complete reinstallation of > the device and restore of config. > More than once I experienced strange issues after updates or reboots which > were entirely gone after reinstallation. > > Kind Regards > > > > > > Am So., 14. Juni 2020 um 11:02 Uhr schrieb Robert Hass <robh...@gmail.com > >: > >> Hi >> I have old MX80 running 10.4R14.2. >> I would like to upgrade it to 18.4R. >> But what upgrade I should use ? >> >> 10.4R -> 15.1R and to 18.4R ? >> >> Rob >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp