Den man. 9. nov. 2020 kl. 22.11 skrev Gert Doering <g...@greenie.muc.de>:
> Hi, > > On Wed, Nov 04, 2020 at 08:55:11PM +0100, Baldur Norddahl wrote: > > So I am searching for work arounds. For example if I could make an ACL > that > > rewrites the vlans matching an IP address, such that the two IPs were on > > two different VLANs, I could solve this by having two interfaces for the > > customer. Alas that does not seem to be possible. > > Why don't you just route the second (and further) IP to the primary IP > as gateway address? Can JunOS not resolve this indirect next-hop? > > In a greenfield deployment I would do exactly that. I am also considering telling future customers that is the only supported way. But a lot of existing customers have a setup with a switch instead of a router, with multiple routers or servers directly connected. A few customers even run VRRP at their end. I have high hopes for the solution outlined by Krasimir. I will report back on that as soon as I can get time to test it. Regards, Baldur _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
