Hello Roger Thank you for the comment. I will research mac-vrf which is new to me. We are using MPLS and are migrating from VPLS. The ACX5448 / ACX710 do not have virtual-switch support (but mac-vrf appears to be available). Aside from mac-vrf my choices are evpn and evpn-vpws. Apparently subscriber management, which we use, only supports evpn-vpws at this time.
This thread was about our server / vm hosting setup however. We only have four server vlans and so I created one evpn instance per vlan. Customer traffic is q-in-q. Not a problem for evpn-vpws but that has limitations which may be a problem for me. I wish Juniper had made support for more than just evpn-vpws as transport interface for "ps" interfaces. I may be forced to stay with VPLS for the time being. Thanks, Baldur Den tir. 11. maj 2021 kl. 15.45 skrev Roger Wiklund <roger.wikl...@gmail.com >: > Hi > > What data plane are you using, MPLS or VXLAN? > > Instance-type evpn is VLAN-Based Service. I.E one VLAN per EVPN instance, > is this what you want? > Configuring EVPN with VLAN-Based Service | EVPN User Guide | Juniper > Networks TechLibrary > <https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/task/evpn-routing-instance-vlan-based-configuring.html> > > If you want to run multiple VLANs in one EVPN instance you can use > VLAN-Aware Service (instance-type virtual-switch or in default > virtual-switch) where each VLAN/VNI will have a unique RT. > Understanding VLAN-Aware Bundle and VLAN-Based Service for EVPN | EVPN > User Guide | Juniper Networks TechLibrary > <https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/concept/evpn-vlan-services-overview-qfx-series.html> > > With that said from Junos 20.4R1 there's a new mac-vrf instance-type where > you can more clearly define the different services > instance-type mac-vrf > service-type vlan-aware / vlan-based / vlan-bundle > Microsoft Word - EVPN_VxLAN_MAC-VRF_NCE.docx (juniper.net) > <https://www.juniper.net/documentation/en_US/release-independent/nce/information-products/pathway-pages/nce/EVPN_VxLAN_MAC-VRF.pdf> > > Not sure when MX/ACX will gain this feature though. > > Regards > Roger > > > > On Sat, May 8, 2021 at 12:12 AM Baldur Norddahl <bal...@gigabit.dk> wrote: > >> Hello >> >> I found the answer to this one. On ACX5448 and ACX710 the >> routing-interface >> statement does absolutely nothing. Instead you need to use the >> undocumented >> l3-interface statement at the same place. On the MX204 platform the >> l3-interface statement does not exist. I will list the two configs below >> for those that might need to know. >> >> Compare mx204 config: >> >> baldur@formervangen-edge1# show routing-instances evpntest >> instance-type evpn; >> protocols { >> evpn { >> default-gateway advertise; >> } >> } >> vlan-id 20; >> routing-interface irb.20; >> interface xe-0/1/7.21; >> vrf-target target:60876:20; >> >> And acx710 / acx5448: >> >> baldur@formervangen-core4# show routing-instances evpntest >> instance-type evpn; >> protocols { >> evpn { >> default-gateway advertise; >> } >> } >> vlan-id 20; >> l3-interface irb.20; >> interface xe-0/0/0.20; >> vrf-target target:60876:20; >> >> Regards, >> >> Baldur >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp