On Mon, Aug 30, 2021 at 12:39:04PM +0200, Leon Kramer via juniper-nsp wrote: > according to Juniper docs if you insert an EX4600-EM-8F module into an > EX4600 chassis the interfaces are being restarted, while with installation > of QFX-EM-4Q they do not. > > However, I have experienced a link loss after inserting a QFX-EM-4Q module > and wonder if the switch must restart interfaces if an EX4600-EM-8F module > is installed into the second module slot.
FWIW: I don't trust any vendor on a switch expansion module. Even if they say it is hot swapable, I've had so many reboot anyway. I would always do it in a maint window. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
