FYI, The check here is: show ted database topology-type l3-unicast show ted link topology-type l3-unicast
If empty, do: set protocols isis traffic-engineering l3-unicast-topology set protocols isis traffic-engineering advertisement always Thank you Colby! Jason On Tue, Jan 11, 2022 at 12:02 PM Jason Iannone <jason.iann...@gmail.com> wrote: > Hi all, > > I'm having trouble getting it up. You can see my lab topology below. I > have an ingress router (green) specifying _include-any RED_ in an SR policy > to reach the egress node (red). I come to you after many failed efforts and > knob twiddling. Static ERO SR-TE LSPs pass traffic without fail. > > The traceoptions logs aren't particularly meaningful to me, but maybe > error 3 means something to someone here. > > Jan 11 15:31:18.380311 SRCS:received compute-response message > Jan 11 15:31:18.380322 SRCS:received comp-response for request_id:1 with > error_code :1 > Jan 11 15:31:20.393280 SRCS:received comp-notify for request_id:1, with > error:3, state_retained:0 num_results:0 > Jan 11 15:31:20.393298 SRCS:Updating compute-results for > tunnel:static-BA2-DCA1_RA1-DAL2, lsp:ADMINGROUP with request_id:1 > Jan 11 15:31:20.393303 RPD_SPRING_TE_COMPUTE_LSP_COMPUTE_FAIL: SR-TE > Policy: Computation failed for source-routing-path:BA2-DCA1_RA1-DAL2, > primary-segment:ADMINGROUP > > I can provide config if needed, but I didn't want to start with an > overload of information. > > Junos 21.1R2 network wide > RSVP deployed network wide (is this the only way to get admin groups into > the TED?) > All backbone interfaces in protocols mpls > > ###Ingress Router Config > set logical-systems ba2-dca1 protocols mpls admin-groups RED 1 > set logical-systems ba2-dca1 protocols source-packet-routing > compute-profile RED admin-group include-any RED > set logical-systems ba2-dca1 protocols source-packet-routing > source-routing-path BA2-DCA1_RA1-DAL2 to 10.0.1.13 > set logical-systems ba2-dca1 protocols source-packet-routing > source-routing-path BA2-DCA1_RA1-DAL2 primary ADMINGROUP compute RED > > ###Red LSR > set logical-systems ba1-dca1 protocols mpls admin-groups RED 1 > set logical-systems ba1-dca1 protocols mpls interface et-1/1/2.8 > admin-group RED > > Topology: https://i.imgur.com/QQBB4c2.png > > Thanks for any assistance you can provide, > > Jason > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp