Matt, Are you hitting https://prsearch.juniper.net/problemreport/PR1629943 ?
-Michael > -----Original Message----- > From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> On Behalf Of > Matthew Crocker via juniper-nsp > Sent: Sunday, October 16, 2022 4:39 PM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] MX204 FPC won't start after upgrade. > > > I have an MX204 running 20.2R3-S5.6 current and I want to upgrade to > something newer. When I do upgrade it goes through smoothly but the FPC > will not come online. It looks like an I2C error, may need a firmware > update. > > So far I've tried to upgrade to: > > junos-vmhost-install-mx-x86-64-21.4R2-S2.6.tgz > junos-vmhost-install-mx-x86-64-22.2R1-S2.4.tgz > > I'm pretty sure there is a new BSD version starting at 21 as well > > I can downgrade back to 20.2.R3 and everything boots and works fine. > > Has anyone had a similar issue? Is there a firmware update I need to try to > find? > > Thanks > > -Matt > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp