Not sure, but if there is a way, it might be configured under "set chassis pic ...", perhaps something like this:
sst chassis pic fpc-slot 0 pic-slot 1 port 0 speed 10g On Mon, Feb 13, 2023 at 09:23:10AM -0600, Chris Adams via juniper-nsp wrote: > I have an old Juniper EX4500 (working on replacing it), and some > FiberStore 10G/1G SFP+ modules (SFP-10GSR-85). When I put the SFP+ in > the EX, it sees it as a 1G module (so interface ge-0/0/X), but the other > end is 10G. Is there a way to force the EX end to 10G with the > multirate SFP+? I see set ether-options speed, but it'll only go to 1g > on the ge-foo interface; I can set xe-foo ether-options speed 10g but it > is ignored (since the EX doesn't think it has an xe-foo interface). _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp