Hello
Has anyone tried to establish a VXLAN connection through a third-party provider
(e.g., Arelion)?
Apart from the standard configuration, what else should be taken into account?
A smaller MTU, perhaps?
I have created three routing instances:
• WARDC (mac-vrf)
• vrf-internal
• vrf-public-external
In vrf-public-external, I have a connection to the Arelion provider (with the
full BGP table and a 0.0.0.0/0 prefix).
In vrf-internal, I created an irb.668 interface with the address
192.168.68.1/24.
I would like to create VLAN/VXLAN 668 linking vrf-internal with the remote
network terminating on the Arista device at xxx.xxx.xxx.xxx. The connection is
established via loopback interfaces:
• Juniper: lo0.100 with address public_ip/32
• Arista: public_ip/32
The Arista IP is reachable from vrf-public-external. It’s not working I don’t
have idea why. In vrf-internal I have also 0.0.0.0/0 leaked from
vrf-external-public.
On both sides i have working internally vxlan configuration.
It is possibe to do something like this?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
