I have a few 304’a doing a lot of ENNI/EVC/CBH/Carrier Ethernet. Been solid. I dug through email, and came across an initial issue with Juno’s upgrades, I recall related to these PR’s.
PR1792524 PR1721421 Aaron > On May 4, 2026, at 1:15 PM, Andrey Kostin via juniper-nsp > <[email protected]> wrote: > > Hello, juniper-nsp readers. > > From the article > https://www.juniper.net/documentation/us/en/software/junos26.1/chassis/topics/topic-map/chassis-guide-tm-fabric-plane-mngmnt.html > : > Limitations > > • MX304 routers have only one built-in SFB and one FPC. Hence there is no > fabric redundancy support. > > Does anybody encountered MX304 HW failures that required a chassis > replacement and how real is the risk of such a failure? > > Kind regards, > Andrey > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
