Igor: Sounds good. I'll test it on my Win98 machine tonight. -Scott
On Thu, 15 Aug 2002, Igor Kotelevsky wrote: > Hello Scott. > I implemented thing, which I wrote yesterday > > Here is what I can implement for the button "Check Again" only. > > If VNC server discovery receives above error code 10055, > > then it waits 0.3 second and repeats the operation one more time. > It seems to me that the button "Check Again" works more reliable. > I'll try to > > heap walker or bound checker to see if we can isolate the cause. > - Igor > > > ----- Original Message ----- > From: "Scott C. Best" <[EMAIL PROTECTED]> > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > Cc: "Kaboodle-devel" <[EMAIL PROTECTED]> > Sent: Thursday, August 15, 2002 9:33 AM > Subject: Re: [Kaboodle-devel] Release build problem > > > > Igor: > > You're right that VNC server discovery, particularly > > in Win98, has become less reliable. As Jeff suggested, it may > > be interesting to try a heap walker or bound checker to see if > > we can isolate the cause. > > > > On a related subject, I was hoping you could modify > > the behavior of the "log VNC usage" button. Right now all it > > does is set the registry entry for WinVNC. Problem is, when > > I hit "View Log" it never finds the file, I always have to > > browse for it. I was hoping you could do one of two things: > > > > 1. Have the WinVNC log be written into the installation dir, > > and have ViewLog always look there first. > > > > 2. Alternatively, don't use WinVNC log at all. Kaboodle has > > its own debug info now that's written to VncServerSessionLog > > when built in Debug mode. Perhaps we could output some (not > > all) of that info into a .txt file. > > > > The intent with logging was for the user to be able to > > find out who connected, or tried and failed to connect, to their > > VNC server. All it needs to show are timestamps, IP address of > > the Viewer, and connection status (failed, connected, disconnected, > > etc). Unfortunately, the debug info shows a whole lot more than > > just that. > > > > Perhaps we could combine both: if the user has "Log > > VNC usage" we could both set the debug flag in the VNC registry, > > *and* record Kaboodle-detected info. So if someone connected > > directly, we could show that from grep'ing the VNC log file. > > If someone connected via Kaboodle, we could show that directly. > > > > Eager for your thoughts. I suppose getting #1 to work > > above would be sufficient for the needs of 0.90. > > > > -Scott > > > > > > On Wed, 14 Aug 2002, Igor Kotelevsky wrote: > > > > > Hello Scott. > > > I see that VNC server discovery has become less reliable. > > > That unreliability shows itself in release build, particularly in Win98 > OS. > > > It isn't possible that one of my recent updates broke something - > > > I didn't changed something pertaining to that part. > > > Here is what I have found. > > > Now VNC discovery sometimes cannot create a client socket for scan port. > > > I see the system error's code 10055. > > > That error has following text > > > "An operation on a socket could not be performed because > > > the system lacked sufficient buffer space or because a queue was full". > > > It looks like another thread simultaneously makes big lot of socket > work. > > > > > > Here is what I can implement for the button "Check Again" only. > > > If VNC server discovery receives above error code 10055, > > > then it waits 0.3 second and repeats the operation one more time. > > > It seems to me that the button "Check Again" will be more reliable. > > > > > > I cannot implement above check error code 10055 for VNC server discovery > > > at the first start Kaboodle (empty registry setting). > > > It seems to me that it is uselessly in that case. > > > We have to find and fix the reason of error code 10055. > > > > > > - Igor > > > > > > ----- Original Message ----- > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > Cc: "Kaboodle-devel" <[EMAIL PROTECTED]> > > > Sent: Wednesday, August 14, 2002 8:37 AM > > > Subject: Re: [Kaboodle-devel] Release build problem > > > > > > > > > > Igor: > > > > Your changes look good. I noticed one thing though: it > > > > seems as if the VNC server discovery has become less reliable > > > > since you made these changes. Sometimes it takes two or three > > > > "Check Again" tries for it to find the VNC server one one of > > > > my machines. It used to catch it right away. > > > > > > > > This is in release build, latest stuff. Is it possible > > > > that one of the recent updates broke something? > > > > > > > > -Scott > > > > > > > > On Tue, 13 Aug 2002, Igor Kotelevsky wrote: > > > > > > > > > Hello Scott. > > > > > > > > > > I inserted exact your texts > > > > > into the top of "VNC setup" tab in the device icon. > > > > > Now only the "Check Again" button is active > > > > > if VNC connection is not possible. > > > > > > > > > > Also I found that Kaboodle saves special debug data into the log > files > > > > > - KaboodleNIDPreAlpha.xml, > > > > > - Kaboodle_Dbg.htm, > > > > > - Gnutella.log. > > > > > That files appeared both in debug and release builds. > > > > > Now that files appear in debug build only. > > > > > > > > > > - Igor > > > > > > > > > > ----- Original Message ----- > > > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > > > Cc: "Kaboodle-devel" <[EMAIL PROTECTED]> > > > > > Sent: Tuesday, August 13, 2002 8:28 AM > > > > > Subject: Re: [Kaboodle-devel] Release build problem > > > > > > > > > > > > > > > > Igor: > > > > > > Good, thanks; VNC tunneling is working again nicely. > > > > > > Only bug I can find right now: when I'm on PC1 and I open the > > > > > > device icon for PC2 (which is not running a VNC service) it > > > > > > says at the top "when connecting to <b>PC2</b> from <b>PC1></b> > > > > > > use these settings". It *used* to say "PC2 is not running a > > > > > > VNC Service" and only the "Check Again" button was active. > > > > > > Did that get changed somehow? > > > > > > > > > > > > -Scott > > > > > > > > > > > > On Mon, 12 Aug 2002, Igor Kotelevsky wrote: > > > > > > > > > > > > > Hello Scott. > > > > > > > I found next VNC problem: > > > > > > > - PC1 run independent VNC service; > > > > > > > - PC1 run Kaboodle with option "Enable Kaboodle Tunnels for > VNC"; > > > > > > > - I open PC1 device icon on PC2 machine and > > > > > > > try to start up "Connect through Kaboodle". That connection > failed. > > > > > > > I found conflict in port number: > > > > > > > - independent VNC service on PC1 listen some port number. > > > > > > > That number by default is 5900. > > > > > > > (it is number by default); > > > > > > > - Kaboodle on PC1 reads port number of VNC viewer and > > > > > > > uses it for start up VNC viewer,... > > > > > > > That number by default is 5900 also. > > > > > > > Now that bug fixed. > > > > > > > Before start "Connection through Kaboodle" > > > > > > > Kaboodle on the viewer side make check: > > > > > > > if there is running independent VNC server on the port number > > > > > N_VNC_SERVER, > > > > > > > then port for start VNC viewer cannot be same as N_VNC_SERVER > > > > > > > and same as port, which use for tunnel. > > > > > > > > > > > > > > I continue test Kaboodle in release and debug mode. > > > > > > > I see that Kaboodle works both in release and debug mode. > > > > > > > If you will find any VNC bug, please send me next log files > > > > > > > - SessionVncServerLog.txt, > > > > > > > - SessionVncViewerLog.txt, > > > > > > > - ViewerThreadLog.txt > > > > > > > for both Kaboodles. > > > > > > > > > > > > > > About port number 7000. > > > > > > > Kaboodle always listens TCP connection on port number 7000. > > > > > > > Please see > > > > > > > http://www.geocrawler.com/archives/3/16728/2002/5/0/8657977/ > > > > > > > If PC1 need to start independent VNC server on PC2, > > > > > > > then PC1 send special message to the PC2 on port number 7000. > > > > > > > Also that port used for initialization "File Transfer". > > > > > > > > > > > > > > - Igor > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > > > > > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > > > > > > Cc: "Kaboodle-devel" <[EMAIL PROTECTED]>; > > > "mailbox" > > > > > > > <[EMAIL PROTECTED]> > > > > > > > Sent: Sunday, August 11, 2002 9:17 PM > > > > > > > Subject: Re: [Kaboodle-devel] Release build problem > > > > > > > > > > > > > > > > > > > > > > Igor: > > > > > > > > I agree that the Release builds are not working right > > > > > > > > now. However, even in Debug mode, I cannot get VNC tunneling > > > > > > > > to work anymore. So I used WinCVS to get a code snapshot from > > > > > > > > August-8, so that VK's NID-synch bugs were not involved. Still > > > > > > > > doesn't work. Details: > > > > > > > > > > > > > > > > 1. I'm running the VNC server on PC1, WinNT, debug build. > > > > > > > > No VNC service is active, Kaboodle is setup to "autostart if > > > > > > > > needed". On PC2, running Win2k, in the Device Icon for PC1, in > > > > > > > > the VNC Setup tab, "Connect Directly" is greyed out. Since > > > > > > > > no server is running on PC1, both choices should be active. > > > > > > > > > > > > > > > > 2. Then on PC2 I open the VNC Service Icon, and go to the > > > > > > > > list of viewers. I enter the password for PC1, hit connect. I > > > > > > > > immediately get an error from VNC "Cannot connect to server". > > > > > > > > Over on PC1, the VNC server icon is in my service tray, and > > > > > > > > it's lit-up, indicating it's receiving a connection. The log > > > > > > > > file on PC1 has just two lines: "BEGIN: StartVNCServer" and > > > > > > > > "StartVNCServer: Ok start Independent VNCserver port number > > > > > > > > 5900". I look at the tcpdump traffic on my LAN, and see the > > > > > > > > following. When I hit connect: > > > > > > > > > > > > > > > > 16:36:57.351343 192.168.123.134.1189 > 192.168.123.130.7000: S > > > > > > > > 2008127198:2008127198(0) win 16384 <mss 1460,nop,nop,sackOK> > (DF) > > > > > > > > > > > > > > > > In the above, PC1 is .130 and PC2 is .134. Why would port > > > > > > > > 7000 be involved in a VNC tunnel? I wait a few seconds to see > > > which > > > > > > > > port the VNC viewer on PC2 is trying to use. Keep in mind that > > > > > > > > "Connect Directly" was not a valid choice: > > > > > > > > > > > > > > > > 16:36:57.807921 192.168.123.134.1190 > 192.168.123.130.5900: S > > > > > > > > 2008283092:2008283092(0) win 16384 <mss 1460,nop,nop,sackOK> > (DF) > > > > > > > > > > > > > > > > So PC2 has tried to connect directly, even though > > > > > > > > Kaboodle on PC1 has opened a tunnel and connected successfully > > > > > > > > with the VNC server (which is why the VNC icon in the service > > > > > > > > tray is lit-up bright white). > > > > > > > > > > > > > > > > 3. I then try connecting again from PC2. I get a Kaboodle > error > > > > > > > > saying "You already have a VNC session connected with PC1". > > > > > > > > > > > > > > > > > > > > > > > > Thanks for looking into this. I was very surprised that > > > > > > > > port-7000 got involved with this connection attempt. > > > > > > > > > > > > > > > > -Scott > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 9 Aug 2002, Igor Kotelevsky wrote: > > > > > > > > > > > > > > > > > Hello Scott. > > > > > > > > > I have tested all my changes in both debug and release > builds. > > > > > > > > > All worked. > > > > > > > > > Then I merged my code with CVS code. > > > > > > > > > Now Kaboodle works in debug builds only. > > > > > > > > > There is a problem in realise build - > > > > > > > > > Kaboodle starts, but a user don't see GUI. > > > > > > > > > I found a problem. > > > > > > > > > Please look into the function int CEFController::Start(). > > > > > > > > > There is a line > > > > > > > > > while (!m_pNetworkManager->bStartUpFinished); > > > > > > > > > It seems to me that there is infinite loop in realize build. > > > > > > > > > The member m_pNetworkManager->bStartUpFinished > > > > > > > > > sets as "TRUE" in the function > > > > > > > > > int CNetworkManager::OnStartup(DWORD nIDController, CGUID > > > > > KaboodleID). > > > > > > > > > It seems like that function don't works correctly in release > > > build. > > > > > > > > > > > > > > > > > > - Igor > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > > > > This sf.net email is sponsored by:ThinkGeek > > > > > > > > > Welcome to geek heaven. > > > > > > > > > http://thinkgeek.com/sf > > > > > > > > > _______________________________________________ > > > > > > > > > Kaboodle-devel mailing list > > > > > > > > > [EMAIL PROTECTED] > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/kaboodle-devel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by: OSDN - Tired of that same old > cell phone? Get a new here for FREE! > https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 > _______________________________________________ > Kaboodle-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/kaboodle-devel > ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ Kaboodle-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/kaboodle-devel