Hello Scott. The bug #1 is fixed. About bug #2. I saw that bug. I found and fixed a some reason - Kaboodle not correctly determined if it must set itself as the Master at startup. But I didn't completed that bug: 1. The old code contained several (about 5) points of calling InitializeVpn(). 2. If a user sets a PC as Master, then Kaboodle must call InitializeVpn() also. My modification #2 had some conflict with #1: Now if Kaboodle start as Non Master, then it do not call InitializeVpn(). But if it receive Remote NID, then it call InitializeVpn() - it's old part of source code. I do not understand the reason of that code. Above conflict has avoided - I removed one calling of InitializeVpn() from the function *CEFController::OnRemoteNIDIn()*. I need some time for understanding in this more attentively and some time for testing.
Others bugs will be fixed later. - Igor ----- Original Message ----- From: "Scott C. Best" <[EMAIL PROTECTED]> To: "Igor Kotelevsky" <[EMAIL PROTECTED]> Cc: "Kaboodle-devel" <[EMAIL PROTECTED]> Sent: Wednesday, October 23, 2002 8:37 PM Subject: Master Node bugs > Igor: > Heya. I'm trying to put all the bugs with the Master > Node stuff into one email. > > 1. For some reason, a network printer's PropPanel has the > Master Node selection stuff that should go only into the > Network Icon PropPanel. > > 2. I've two Kaboodle's on my LAN, PC1 (WinNT) and PC2 (Win98). > PC1 turned on first, so it should be the Master Node. When > I start Kaboodle on PC2, I look in the Network Icon on PC1 > and it says that PC2 is now the Master. When I look on PC2, > though, it says that PC1 is the Master. When I look at the > network traffic, both PC's are pinging the Active List of > devices every 5 seconds (which only the Master Node should > do). When I open the Network Icon, the value shown in the > dropdown must be set to the current Master Node. This value > must be NID sync'd across the whole network. > > 3. On PC1, the dropdown in the Network Icon says that PC2 is > the Master Node. When I open the PropPanel on PC2, the > selection box "Make this PC the Master Node" is ready to > be checked. If PC2 is already the Master, then this checkbox > should be replaced with "This PC is currently the Kaboodle > Master Node". > > 4. Using these checkboxes and the dropdown in the Network icon, > I am unable to change the Master from PC1. If I change it > using the dropdown to PC2, click okay, then reopen the Network > Icon, it still says PC1. If I select one of the checkboxes > and click Okay, the dropdown in the Network Icon does not > change. None of my changes affect the Master Node status. > > 5. If I move the PC2 icon in the GUI of PC1 to a new position, and > then try to change the Master Node status using Kaboodle on > PC2, the position of PC2 in the GUI reverts to where it was. > Master Node status should not affect the position of devices > in the GUI. > > 6. To change the Master Node, the user should have to do one > of two things: > > * Open the PropPanel for the PC Device, select the > Master Node checkbox, and click Okay. If they open > another tab before clicking Okay, the checkbox > should reset itself. If the click Cancel, no changes > are made. > > * Open the Network Icon, select a new device in the > dropdown, and click Okay. If they open another tab > before clicking Okay, the dropdown should reset > itself to the current Master. If they click Cancel, > not changes are made. > > Those are the only two ways a Master Node can be changed. > Please ignore any of my requests below which contradict this. > Thanks! > > -Scott > > > On Wed, 23 Oct 2002, Igor Kotelevsky wrote: > > > Hello Scott. > > Please see my inline comments. > > - Igor > > > > ----- Original Message ----- > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > Cc: <[EMAIL PROTECTED]> > > Sent: Tuesday, October 22, 2002 9:56 AM > > Subject: Re: Misc bugs, 18 Oct 02 > > > Igor: > > > Sorry, missed something: > > > > > > 7. When I select a new Master Node in the Network Icon dropdown > > > and hit OKAY, it should be updated everywhere. It's not. If > > > I change it, hit OK and immediately open the panel again, the > > > same old data is there. Also, if I change the dropdown, click > > > on the Remote Network tab, then back to the main tab, the > > > dropdown should show the current Master, *not* my halfway > > > made change. > > > > Sorry, I think there is some miscellaneous understanding. > > Earlier you wrote: > > > > > > 6. Please remove the text in the Network Icon which reads > > > > > > "Status of the PC will be changed...". Also, please > > > > > > remove the "+" and "-" signs from next to the Device > > > > > > names in the dropdown. All I want in that dropdown list > > > > > > are the Kaboodle PC's on my LAN, that's it. Whichever > > > > > > one is selected when I hit "OK" becomes the Master. > > These exact things were implemented. > > > > You wrote: > > > > > > Whichever one is selected when I hit "OK" becomes the Master. > > A. I implemented that like next: > > - If a PC didn't was the "Master" and a user hit "OK", > > then the PC becomes the Master. > > - If a PC already was the "Master" and a user hit "OK", > > then there is not any change. > > > > Also above action will take place *only* > > if user change that dropdown like you asked: > > ----- Original Message ----- > > From: "Scott C. Best" <[EMAIL PROTECTED]> > > To: "Igor Kotelevsky" <[EMAIL PROTECTED]> > > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > > Sent: Friday, October 18, 2002 10:39 PM > > Subject: Re: [Kaboodle-devel] Misc bugs, 18 Oct 02 > > > To clarify on #6: if the user selects a new Master > > > machine in the Network Icon, and then clicks Remote Networks > > > tab before hitting Okay...the Master Node status should *not* > > > change. Only if they change it *and* hit Okay should it be > > > updated. > > B. I implemented that like next: > > Kaboodle stores the selected dropdown when it opens that tab. > > After a user hit Okay, then it compares selected dropdown and it initialized > > index. > > If these values are identical, then Kaboodle don't make any change. > > If the user clicks Remote Networks tab, then Kaboodle don't make any change > > also. > > > > C. About listing of the dropdown. > > Kaboodle lists all PC's, which runs Kaboodle it the LAN. > > If there is the Kaboodle, which is the Master, > > then that device will be selected in the dropdown. > > If there are several Masters, then the first (in lexicographically ordered) > > Master device will be selected in the dropdown. > > If there is not any Master, then the first (in lexicographically ordered) > > Kaboodle device will be selected in the dropdown. > > > > I cannot understand what of my implementations #A-#C are invalid. > > > > > 8. In the main Prop Panel for a Kaboodle PC, there is a checkbox > > > saying "Make this PC the Kaboodle Master Node" and it's always > > > checked. Please change this so that it's always unchecked. If > > > the user checks it, and hits Okay, it should update the Master > > > Node status everywhere just like in #7. > > That checkbox isn't always checked. > > It is checked if a PC is the Master. > > It is unchecked if the PC isn't the Master. > > So a user can see if the PC is the Master or not. > > I implemented what you asked: > > - Above checkbox is unchecked always. > > (So a user *cannot* see if the PC is the Master or not.) > > - If a PC didn't was the "Master" and a user hit "OK", > > then the PC becomes the Master. > > - If a PC already was the "Master" and a user hit "OK", > > then there is not any change. > > So the user can set a PC as the Master, but cannot set it as Non-Master. > > > > > > > On Tue, 22 Oct 2002, Scott C. Best wrote: > > > > > > 6. Please remove the text in the Network Icon which reads > > > > > > "Status of the PC will be changed...". Also, please > > > > > > remove the "+" and "-" signs from next to the Device > > > > > > names in the dropdown. All I want in that dropdown list > > > > > > are the Kaboodle PC's on my LAN, that's it. Whichever > > > > > > one is selected when I hit "OK" becomes the Master. > > > > > > > > > > > > > > > > > > Igor: > > > > > > To clarify on #6: if the user selects a new Master > > > > > > machine in the Network Icon, and then clicks Remote Networks > > > > > > tab before hitting Okay...the Master Node status should *not* > > > > > > change. Only if they change it *and* hit Okay should it be > > > > > > updated. > > > > > > > > > > The text in the Network Icon which reads > > > > > "Status of the PC will be changed..." removed. > > > > > Signs "+" and "-" removed also. > > > > > Only if a user change selected dropdown *and* hit Okay should it be > > > > > updated. The user can set a PC as the Master Node from that tab. > > > > > The user *cannot* set a PC as the "Non Master Node" from that tab. > > > > > > > > > > > > > > ------------------------------------------------------- > > This sf.net emial is sponsored by: Influence the future > > of Java(TM) technology. Join the Java Community > > Process(SM) (JCP(SM)) program now. > > http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en > > _______________________________________________ > > Kaboodle-devel mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/kaboodle-devel > > > > ------------------------------------------------------- This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now. http://ad.doubleclick.net/clk;4729346;7592162;s?http://www.sun.com/javavote _______________________________________________ Kaboodle-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/kaboodle-devel
