I am new to kaboodle. Have following issues, maybe someone could shed some light on this:
a) seems to be when there is a wireless bridge in the network, kaboodle does not correctly identify the attached devices. Kaboodle shows a device with the IP adress of the wireless bridge (netgear) and the mac adress of the attached device. does not see port 80 on attached device. when attached device is connected directly to network with bridge it is detected correctly (this is the case with a Dlink camera, also a RIO receiver, and also a Lindows PC). Did not check what happens when there are more then one device is connected behind bridge. I have 3 wireless bridges in network (2x netgear, 1x Dlink, all act the same) b) also Kaboodle detects a device with IP 127.0.0.1 (how is this possible?) with a mac adress not existing on the network. This device is only detected when a PC with ME is on the network, this PC has a second network card, not installed, not connected to any network installed (mac not known).....i assume it sees this network card...no explanation for whatever reason (i can not check the mac adress at the moment of this not used network card to check if this is really the case) c) this brings up the point that it would be nice to have the possibility to suppress the display of a device, like this or when a laptop is only visiting once your network and then can not be removed anymore. Also to "join" two or more devices, for example the same laptop one time connected wireless and the next time wired, show up as separate devices. d) Kaboodle works on w2k and ME with pcap (my main kaboodle runs on w2k), when installed on XP it seems only working when pcap is NOT installed. After I installed pcap, kaboodle only comes up, identifies the network and devices and then crashes and closes. (have not tried yet to uninstall pcap, if this solves the problem) e) i would like to connect from a external PC (external to my home kaboodle network) to my kaboodle network. As this PC is on a large network or directly on the internet, it would be great to switch of the detection function of kaboodle as long it is not connected via zebedee to my home kaboodle network via the VPN. Any way to do this ? thanks for any help, wolfgang ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ Kaboodle-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/kaboodle-user To UNSUBSCRIBE, click on the above link.
