--- muzzi <[EMAIL PROTECTED]> wrote: > thank you for you email:) > > your embedded cpu is amd Au1XXX series with mips core? > the core with or without mmu? > have you modified the kaffe's configurations files by hand? >
Hi, I'm working on a AU1100, with MMU; from the datasheet: The Au1100 processor is a complete SOC based on the MIPS32 instruction set. Designed for maximum performance at very low power, the Au1100 runs up to 500 MHz. Power dissipation is less than 0.25 watt for the 400 MHz version. Highly integrated with onchip SDRAM, SRAM/Flash EPROM memory controllers, a LCD controller, 10/100 Ethernet Controller, USB Host and Device, UARTs (3), and GPIOs (up to 48,24 dedicated). The Au1100 processor runs a variety of operating systems, including Windows® CE.NET, Linux and VxWorks. Moreover, the integration of peripherals with the unique, high performance, MIPS-compatible core provides low system cost, small form factor, low system power requirement, simple designs at multiple performance points and thus, short design cycles. For the configuration it was not very direct: I compiled kaffe on PC # ./configure --with-engine=intrp --enable-pure-java-math --without-esd --without-kaffe-x-awt --with-kaffe-nanox-awt --without-classpath-gtk-awt then I changed /home/giammy/working/kaffe-1.1.6/libraries/javalib/Makefile uncommenting the line: #MAYBE_PEERLESS_KAFFE_AWT = awt-implementations and gave the make. Then I copied libraries/javalib/rt.jar on the AMD built tree of kaffe (same place) and copied /home/giammy/working/kaffe-1.1.5/libraries/javalib/awt-implementations/kaffe/kaffeawt.jar on AMD /home/AMDgiammy/kaffe-1.1.5/kaffeawt.jar Then I configure the AMD kaffe: ./configure --with-jikes=no --with-engine=intrp --enable-pure-java-math --without-esd --without-kaffe-x-awt --with-kaffe-nanox-awt --with-rt-jar=/home/AMDgiammy/kaffe-1.1.5/libraries/javalib/rt.jar --without-classpath-gtk-awt Removed from file kaffe-1.1.5/Makefile the raw libraries/javalib \ and changed in the file kaffe-1.1.6/libraries/Makefile the raw from SUBDIRS = clib javalib extensions to SUBDIRS = clib extensions and finally started the make -- Gianluca Moro Visit http://ilpinguino.altervista.org/ [EMAIL PROTECTED] MyBlog http://blog.libero.it/giangiammy/ __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com _______________________________________________ kaffe mailing list kaffe@kaffe.org http://kaffe.org/cgi-bin/mailman/listinfo/kaffe