https://bugs.kde.org/show_bug.cgi?id=198173
--- Comment #13 from lega99 <dragan.le...@mail.ru> ---
(In reply to Dennis Schridde from comment #12)
You need to install the plasmoid-widget and set in panel. the widget requires
an lm-sensors that is set in the sudo sensor-detect terminal and hddmp for
disks. Ksysguar programs don't have that in them. Ever since this widget became
an integral part of the installation it has not been working
sensors
amdgpu-pci-0100
Adapter: PCI adapter
vddgfx: 1.07 V
fan1: 1216 RPM (min = 0 RPM, max = 3600 RPM)
edge: +43.0°C (crit = +94.0°C, hyst = -273.1°C)
power1: 16.17 W (cap = 60.00 W)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 54.24 W (crit = 95.01 W)
f71889a-isa-0480
Adapter: ISA adapter
+3.3V: 3.31 V
in1: 976.00 mV (max = +2.04 V)
in2: 1.10 V
in3: 888.00 mV
in4: 624.00 mV
in5: 1.36 V
in6: 1.66 V
3VSB: 3.31 V
Vbat: 3.34 V
fan1: 1446 RPM
fan2: 0 RPM ALARM
fan3: 1507 RPM
temp1: +41.0°C (high = +85.0°C, hyst = +81.0°C)
(crit = +80.0°C, hyst = +76.0°C) sensor = transistor
temp2: +45.0°C (high = +85.0°C, hyst = +79.0°C)
(crit = +109.0°C, hyst = +103.0°C) sensor = thermistor
temp3: +37.0°C (high = +70.0°C, hyst = +68.0°C)
(crit = +85.0°C, hyst = +83.0°C) sensor = transistor
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +18.5°C (high = +70.0°C)
(crit = +52.0°C, hyst = +49.0°C)
--
You are receiving this mail because:
You are watching all bug changes.
