https://bugs.kde.org/show_bug.cgi?id=485025
--- Comment #1 from Jure Repinc <j...@holodeck1.com> ---
I have a similar issue here. Only two hardware sensors (iwlwifi_1-virtual-0,
nvme-pci-0a00) of all the ones available are shown. This is what "sensors"
command shows:
nct6799-isa-0290
Adapter: ISA adapter
in0: 920.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 1.03 V (min = +0.00 V, max = +0.00 V)
in6: 632.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 1.39 V (min = +0.00 V, max = +0.00 V) ALARM
in11: 1.12 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 440.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 2.03 V (min = +0.00 V, max = +0.00 V) ALARM
in15: 848.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in16: 1.82 V (min = +0.00 V, max = +0.00 V) ALARM
in17: 1.28 V (min = +0.00 V, max = +0.00 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 1656 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 0 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
SYSTIN: +34.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
CPUTIN: +54.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
AUXTIN0: +47.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
AUXTIN1: +5.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
AUXTIN2: +19.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C) sensor = thermistor
AUXTIN3: -60.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
AUXTIN4: +24.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C)
PECI/TSI Agent 0 Calibration: +61.0°C (high = +80.0°C, hyst = +75.0°C)
AUXTIN5: +12.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
TSI0_TEMP: +72.5°C
intrusion0: ALARM
intrusion1: OK
beep_enable: disabled
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +72.4°C
Tccd1: +64.5°C
nvme-pci-0a00
Adapter: PCI adapter
Composite: +44.9°C (low = -273.1°C, high = +80.8°C)
(crit = +80.8°C)
Sensor 1: +44.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +49.9°C (low = -273.1°C, high = +65261.8°C)
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +35.0°C
amdgpu-pci-0100
Adapter: PCI adapter
vddgfx: 1.13 V
fan1: 860 RPM (min = 0 RPM, max = 2900 RPM)
edge: +59.0°C (crit = +94.0°C, hyst = -273.1°C)
PPT: 52.07 W (cap = 180.00 W)
SYSTEM INFO:
System Monitor version 5.92.90
Operating System: openSUSE Tumbleweed 20240506
KDE Plasma Version: 6.0.80
KDE Frameworks Version: 6.2.0
Qt Version: 6.7.0
Kernel Version: 6.8.8-1-default (64-bit)
Graphics Platform: Wayland
Processors: 12 × AMD Ryzen 5 7600 6-Core Processor
Memory: 31.1 GiB of RAM
Graphics Processor: AMD Radeon RX 480 Graphics
Manufacturer: ASUS
--
You are receiving this mail because:
You are watching all bug changes.
