https://bugs.kde.org/show_bug.cgi?id=484019
--- Comment #7 from bmstet...@gmx.de ---
Its not a Duplicate of bug 474766
The Sensors you assume to be there are not existing on Threadripper 1920x
the in the bug 474766 mentioned sensor " Hardware
Sensors/coretemp-isa-0000/Core 0" is not existing on my system.
Where du you find the mysterious Sernsor that should show my cpu temperature
when lm-sensors cant find it?
The last 5 years Tctl and Tdie was the only option.
Find the full list of all sensors in my system after sensors-detect with yes to
all. sensors detect attached
~ # sensors
nct6779-isa-0290
Adapter: ISA adapter
Vcore: 424.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.08 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.84 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 912.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 1.37 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.44 V (min = +0.00 V, max = +0.00 V) ALARM
Vbat: 3.25 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 0.00 V (min = +0.00 V, max = +0.00 V)
in10: 832.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 864.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.67 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 920.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 872.00 mV (min = +0.00 V, max = +0.00 V) ALARM
fan1: 2909 RPM (min = 0 RPM)
fan2: 910 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 1070 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM
sensor = thermistor
CPUTIN: +31.0°C (high = +80.0°C, hyst = +75.0°C) sensor =
thermistor
AUXTIN0: +7.0°C sensor = thermistor
AUXTIN1: +35.0°C sensor = thermistor
AUXTIN2: +33.0°C sensor = thermistor
AUXTIN3: +33.0°C sensor = thermistor
SMBUSMASTER 0: +56.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
PCH_DIM0_TEMP: +0.0°C
TSI0_TEMP: +56.8°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
k10temp-pci-00cb
Adapter: PCI adapter
Tctl: +56.8°C
Tdie: +29.8°C
nvme-pci-4100
Adapter: PCI adapter
Composite: +43.9°C (low = -273.1°C, high = +84.8°C)
(crit = +84.8°C)
Sensor 1: +43.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +47.9°C (low = -273.1°C, high = +65261.8°C)
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: N/A
amdgpu-pci-0a00
Adapter: PCI adapter
vddgfx: 680.00 mV
fan1: 511 RPM (min = 0 RPM, max = 3600 RPM)
edge: +37.0°C (crit = +100.0°C, hyst = -273.1°C)
(emerg = +105.0°C)
junction: +50.0°C (crit = +110.0°C, hyst = -273.1°C)
(emerg = +115.0°C)
mem: +66.0°C (crit = +108.0°C, hyst = -273.1°C)
(emerg = +113.0°C)
PPT: 51.00 W (cap = 244.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +56.8°C
Tdie: +29.8°C
Tccd1: +56.5°C
--
You are receiving this mail because:
You are watching all bug changes.
