2009/11/6 Andriy Gapon <a...@icyb.net.ua>: > on 04/11/2009 09:46 Andriy Gapon said the following: >> on 22/10/2009 00:55 Jason E. Hale said the following: >>> Attached is a port for the latest KDE4 version of K3B (1.68.0 alpha3): >>> http://www.k3b.org/ >>> This is still labeled alpha, but may be useful for some users who wish to >>> reduce the need for KDE3 libraries. You may, however, safely have this port >>> installed along side of the KDE3 version of K3B. >>> >>> I added support for sysutils/cdrkit, but I would not recommend it for users >>> with DVD drives since sysutils/dvd+rw-tools requires sysutils/cdrtools which >>> conflicts with cdrkit. >>> >>> I would appreciate any other feedback or suggestions. >> >> Jason, >> >> sorry for my belated feedback - this looks and works very good. >> Please commit/submit to the ports tree. > > Hmm, it seems that there is another issue. > Looks like k3b invokes cdrecord with unsupported device specification. > Not sure if this is Linux vs FreeBSD issue, or something else (e.g. cdrecord > vs > cdrkit). > > [cdrecord] scsidev: '/dev/cd0' > [cdrecord] devname: '/dev/cd0' > [cdrecord] scsibus: -2 target: -2 lun: -2 > [cdrecord] /usr/local/bin/cdrecord: Invalid argument. Open by 'devname' not > supported on this OS. Cannot open or use SCSI driver. > [cdrecord] /usr/local/bin/cdrecord: For possible transport specifiers try > 'cdrecord dev=help'. > > Looks like cdrecord was started with dev=/dev/cd0 while on FreeBSD it should > be > started with something like dev=5,0,0.
Same problem with cdrecord or cdrkit, same problem with k3b-1.69.0.a4 : scsidev: '/dev/cd0' devname: '/dev/cd0' scsibus: -2 target: -2 lun: -2 /usr/local/bin/cdrecord: Invalid argument. Open by 'devname' not supported on this OS. Cannot open SCSI driver. /usr/local/bin/cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. /usr/local/bin/cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Cdrecord-Clone 2.01 (amd64-unknown-freebsd8.0) Copyright (C) 1995-2004 Jörg Schilling TOC Type: 1 = CD-ROM cdrecord command: ----------------------- /usr/local/bin/cdrecord -v gracetime=2 dev=/dev/cd0 speed=10 -tao driveropts=burnfree -overburn blank=fast using cdrkit : cdrecord ----------------------- scsidev: '/dev/cd0' devname: '/dev/cd0' scsibus: -2 target: -2 lun: -2 /usr/local/bin/wodim: Invalid argument. Cannot open SCSI driver! For possible targets try 'wodim --devices' or 'wodim -scanbus'. For possible transport specifiers try 'wodim dev=help'. For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from the wodim documentation. TOC Type: 1 = CD-ROM cdrecord command: ----------------------- /usr/local/bin/wodim -v gracetime=2 dev=/dev/cd0 speed=10 -sao driveropts=burnfree -overburn -data -tsize=353688s - I was able to blank and burn an iso image when launching the commands manually with dev='2,0,0'. > > -- > Andriy Gapon > _______________________________________________ > kde-freebsd mailing list > kde-freebsd@kde.org > https://mail.kde.org/mailman/listinfo/kde-freebsd > See also http://freebsd.kde.org/ for latest information > -- Olivier Smedts _ ASCII ribbon campaign ( ) e-mail: oliv...@gid0.org - against HTML email & vCards X www: http://www.gid0.org - against proprietary attachments / \ "Il y a seulement 10 sortes de gens dans le monde : ceux qui comprennent le binaire, et ceux qui ne le comprennent pas." _______________________________________________ kde-freebsd mailing list kde-freebsd@kde.org https://mail.kde.org/mailman/listinfo/kde-freebsd See also http://freebsd.kde.org/ for latest information