Am Freitag, 29. Dezember 2006 18:12 schrieb Kevin Ottens: > Le Vendredi 29 Décembre 2006 18:06, Christian Esken a écrit : > > Thanks for the explantion. > > > > I checked the place and it is there. But my application (and also > > "solidshell hardware list") only finds the fake stuff. I then incrementaly > > started reinstalling everything. After several tries I also removed an old > > Qt4.2.0 installation and again reinstalled (remove > > installaton/clean/compile/install) complete KDE4. But I have still no > > success (see log below). > > Are you sure your sycoca database is up to date? > Also try to "kcmshell kcm_solid" it'll list all the backends found in the > sycoca database. If it's not here that's definitely a sycoca issue, in this > case kbuildsycoca will probably fix it.
Thanks so much for diagnosing from remote. You directly hit it - I would never have thought about sycoca. I'll keep this in mind now. Now I can go back to KMix hotplugging. :-) Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if1' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_alsa_playback_2_0' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_oss_pcm_2_0' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_oss_pcm_2_0_0' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_oss_mixer_2__1' Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_alsa_control_2__1' Christian _______________________________________________ Kde-hardware-devel mailing list [email protected] https://mail.kde.org/mailman/listinfo/kde-hardware-devel
