Dear Francis, thanks a lot for your answer. You say:
> Please note the localization process is the same for ISC DHCP and Kea: > it follows the standard so selectors are used in the same order, > and in both when shared networks are used the "selected subnet" is > in fact the selected shared network: next steps will iterate through > members, in Kea starting by the selected subnet. Ok, this is clear. It is well described on https://kea.readthedocs.io/en/latest/umls.html#dhcpv4-subnet-selection Can you confirm that "interface" and "relay" parameters, which, in KEA, can be configured either at the level of the shared-network, or at the level of the subnet, 1) are both optional parameters and are not really needed in "standard" topologies, and 2) that these 2 parameters don't exist in ISC DHCP. They are new with KEA, right ? Thanks again. Veronique -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users