Hello Kea list,
I am trying to configure kea-ipv6 in a BNG context where kea will be
responsible for providing IP address for WAN (IA_NA) and for IA_PD. There is a
requirement that when assigning IA_NA each Residential Gateway be given an IP
address from a separate /64 prefix.
For example RIPE BCOP-690 section 4.1.1 says:
<quote>
Using a /64 prefix from a dedicated pool of IPv6 prefixes is the most common
scenario and currently the best practice. A separate block of IPv6 space is
allocated for the WAN links to the end customer CPEs, so that when CPE connects
to the network and performs router discovery, a /64 prefix is used to number
both ends of the connection.</quote>
How such a configuration be provided in kea? From what I have seen if a /48
prefix is used in pool, kea will try to allocate single /128 to each CPE, and
pd-pools are for IA_PD.
Thanks for your help!
X.
--
ISC funds the development of this software with paid support subscriptions.
Contact us at https://www.isc.org/contact/ for more information.
To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users.
Kea-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/kea-users
