Hi Kraishak, It is currently not possible. HA is currently an all or nothing setting in Kea.
Unrelated to your question - Suggestion: You should look at hot-standby mode instead of the load-balancing mode of Kea, as it is a much better mode than was available in ISC DHCP. There really isn't a good reason to load balance anyway as each server in the pair needs to be able to handle the load by itself in an outage situation. Thank you, Darren Ankney On Wed, Apr 5, 2023 at 11:00 AM Kraishak Mahtha <kraishak....@gmail.com> wrote: > > Hi All, > > Can we configure the kea-DHCP HA with the combination of subnets like a few > associated with HA and a few without? > Like If I have a few subnets like > 192.168.0.0/24, 192.168.1.0/24, 192.168.2.0/24, 192.168.3.0/24 > From the above can we configure the HA for the first two subnets and the > other two to be in standalone mode, > We can do this in the ISC DHCP with a statement including in that pool > section like > failover peer "peer-service-center-1"; in the pool section but I don't find > the equivalent in the kea, > Can someone guide or suggest to me if they encounter the same use case? > > > Thanks in Advance > Kraishak > -- > ISC funds the development of this software with paid support subscriptions. > Contact us at https://www.isc.org/contact/ for more information. > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > Kea-users mailing list > Kea-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/kea-users -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users
