Hi, As far as I can see I've got the socket statements ok, different socket names though.
Trying the direct socket approach using socat works ok. ~$ cat list-lease.json |socat UNIX:/tmp/kea4-ctrl-socket -,ignoreeof | jq { "arguments": { "leases": [ { "client-id": "01:00:17:5f:a5:43:1a", "cltt": 1686119440, "fqdn-fwd": true, "fqdn-rev": true, "hostname": "tfbu-ra003.cctv.telenor.net", "hw-address": "00:17:5f:a5:43:1a", "ip-address": "10.140.31.43", "state": 0, "subnet-id": 19, "valid-lft": 3600 }, ...etc I'm running kea-shell on the same server where kea-ctrl-agent is running so there is no firewall involved. I've also tried to telnet to the 8001 port and that connects ok. ./PerW > -----Original Message----- > From: Kea-users <kea-users-boun...@lists.isc.org> On Behalf Of Darren > Ankney > Sent: tirsdag 6. juni 2023 22:04 > To: kea-users@lists.isc.org > Subject: Re: [Kea-users] How do I list current IPv4 leases? (OPEN) > > Hi, > > First, have a look in your DHCP4 Kea configuration and locate the socket > statement which should look something like this: > > "control-socket": { > "socket-type": "unix", > "socket-name": "/tmp/kea-dhcp4-socket" > }, > > Make sure your kea-ctrl-agent is connecting to that socket which would look > something like this if following the example above: > > "control-sockets": { > "dhcp4": { > "socket-type": "unix", > "socket-name": "/tmp/kea-dhcp4-socket" > }, > > Make sure you have the correct ip and port set in your kea-ctrl-agent also. > Something like this: > > { > "Control-agent": { > "http-host": "10.123.97.212", > "http-port": 8001, > > > If all that checks out, then try sending your commands directly to the > socket... > Put your command in a .json file. I'll call mine command.json. I'll put the > command in the command.json file like > this: > > { > "command": "config-get" > } > > And then I'll execute the command: > > cat command.json | sudo socat UNIX:/tmp/kea-dhcp4-socket -,ignoreeof | jq > . > > You may need to install socat or jq or both. They are both useful. > socat lets you talk to a unix socket. jq formats (among other things) json > output. > > If you are still not able to connect using kea-shell to the IP, then it might > be a > firewall problem? > > Thank you, > > Darren Ankney > > On Tue, Jun 6, 2023 at 8:59 AM Weisteen Per <per.weist...@telenor.no> > wrote: > > > > Hi > > > > Thanks, I'll try to keep this conversation OPEN 😉 > > > > I'm running HA setup and has kea-ctrl-agent on port 8001 on my primary > server (10.123.97.212) and tried kea-shell : > > kea-shell --host 10.123.97.212 --port 8001 --service dhcp4 > > lease4-get-all but I'm just receiving a Connection Timeout after several > minutes. > > > > Did the same using curl and got same reply packed in HTML code. > > curl -X POST -H "Content-Type: application/json" -d '{ "command": > > "lease4-get-all", "service": [ "dhcp4" ] }' http://10.123.97.212:8081 > > <I didn't bother pasting the HTML encoded reply> > > > > I've got approx. 80 leases so this shouldn't take much time. > > > > > > ./PerW > > > > > -----Original Message----- > > > From: Kea-users <kea-users-boun...@lists.isc.org> On Behalf Of Kevin P. > > > Fleming > > > Sent: tirsdag 6. juni 2023 13:32 > > > To: kea-users@lists.isc.org > > > Subject: Re: [Kea-users] How do I list current IPv4 leases? > > > (INTERNAL) > > > > > > On Tue, Jun 6, 2023, at 07:28, Weisteen Per wrote: > > > > Hi > > > > > > I'm replying even though this was apparently an "INTERNAL" message > > > :-) > > > > > > > > > > > Simple question, how do I get a list of all current leases when > > > > using memfile as database backend? > > > > > > Regardless of the backend, the 'lease_cmds' hook library is what you want: > > > > > > https://kea.readthedocs.io/en/kea-2.2.0/arm/hooks.html#lease-cmds-le > > > ase- commands-for-easier-lease-management > > > -- > > > ISC funds the development of this software with paid support > subscriptions. > > > Contact us at https://www.isc.org/contact/ for more information. > > > > > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > > > > > Kea-users mailing list > > > Kea-users@lists.isc.org > > > https://lists.isc.org/mailman/listinfo/kea-users > > -- > > ISC funds the development of this software with paid support subscriptions. > Contact us at https://www.isc.org/contact/ for more information. > > > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > > > Kea-users mailing list > > Kea-users@lists.isc.org > > https://lists.isc.org/mailman/listinfo/kea-users > -- > ISC funds the development of this software with paid support subscriptions. > Contact us at https://www.isc.org/contact/ for more information. > > To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > > Kea-users mailing list > Kea-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/kea-users -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users