Hi Vladimir, You are correct, I believe. Kea flex-option hook cannot overwrite siaddr (next-server) since it isn't a DHCP option. Do you need next-server for other clients? You can set it to an empty string like so:
"next-server": "", at the global or subnet level. See here for further information: https://kea.readthedocs.io/en/kea-2.4.0/arm/dhcp4-srv.html#next-server-siaddr Thank you, Darren Ankney On Sun, Oct 15, 2023 at 4:41 PM Vladimir Nikolic <vladi...@nikolic.si> wrote: > > Thanks Darren. > > I'm trying to set up custom next-server and boot-file-name by setting up > options 66 in 67 through the flex option hook, everything based on > relaying router ip. > I can see that KEA server sends both these options properly. > But PXE (VMware) client properly picks the filename (option 67) but > wrongly picks the SIADDR ip instead of TFTP server name (option 66). > I presume flex option hook can't rewrite the next-server (SIADDR) value? > > Regards, > Vladimir > > On 2023-10-15 21:35, Darren Ankney wrote: > > Hi Vladimir, > > > > You should be able to do something like this with the flex option > > hook: > > https://kea.readthedocs.io/en/kea-2.4.0/arm/hooks.html#libdhcp-flex-option-so-flexible-option-actions-for-option-value-settings > > > > Just need to find out what can be tested for. Is the traffic relayed? > > Will there be a specific giaddr for the client in the subnet that you > > want to set the custom options? You can test for a specific relay > > agent IP (giaddr) with pkt4.giaddr == 192.0.2.1, for example. You can > > test if a client is a member of the PXEClients class with > > member('PXEClients'). > > > > Hope this helps! > > > > Thank you, > > > > Darren Ankney > > > > On Sun, Oct 15, 2023 at 11:40 AM Vladimir Nikolic <vladi...@nikolic.si> > > wrote: > >> > >> Let's say I want to send custom next-server and filename to PXE > >> clients, > >> depending on subnet in which they are located. > >> > >> In dhcpd, I define a new option, e.g.: > >> option something-new code 250 = string; > >> > >> Then I set its value in some of the subnets: > >> subnet xyz { > >> option something-new "my-value"; > >> ... > >> > >> And within a class definition, I can set up options (e.g. next-server > >> and filename) based on the value of something-new option (defined > >> within > >> subnets): > >> class "PXEClients" { > >> match if substring(option vendor-class-identifier, 0, 9) = > >> "PXEClient"; > >> if config-option something-new = "my-value" > >> next-server my-new-server; > >> filename "my-new-filename"; > >> } else { > >> next-server my-old-server; > >> filename "my-old-filename"; > >> } > >> ... > >> > >> So it's one class with different next-server/filename options, based > >> on > >> the subnet in which clients live. > >> > >> From what I've seen so far, you can't do something similar in KEA. > >> You have to define next-server and filename in every of those subnets, > >> and that will apply to all the clients in that subnet (not just to > >> those > >> belonging to PXEClients class). > >> > >> Thanks > >> > >> > >> On 2023-10-15 17:18, Darren Ankney wrote: > >> > Hi, > >> > > >> > I'm not entirely sure what you are asking here. Do you mean that you > >> > need to add a client to a class based on what subnet was selected? > >> > > >> > Thank you, > >> > > >> > Darren Ankney > >> > > >> > On Fri, Oct 13, 2023 at 12:36 PM Vladimir Nikolic via Kea-users > >> > <kea-users@lists.isc.org> wrote: > >> >> > >> >> Hi, > >> >> > >> >> We are struggling with the migration from DHCPD to KEA. > >> >> Is there any easy alternative to this dhcp-eval feature: > >> >> > >> >> config-option option-name > >> >> The config-option operator returns the value for the specified > >> >> option that the DHCP client or server has been configured to send. > >> >> > >> >> In DHCPD, we define an option, and then set it up on particular > >> >> subnets. > >> >> It can then be used during class evaluation, by config-option feature. > >> >> In that way, different classes (with e.g. different next-server and/or > >> >> filename defined) can be assigned to similar clients, just based on > >> >> the > >> >> option value set in a subnet definition. > >> >> > >> >> From what we've seen so far, something like that is not possible with > >> >> KEA. > >> >> Looks like we'll have to find an alternative solution. > >> >> > >> >> Thanks > >> >> -- > >> >> ISC funds the development of this software with paid support > >> >> subscriptions. Contact us at https://www.isc.org/contact/ for more > >> >> information. > >> >> > >> >> To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. > >> >> > >> >> Kea-users mailing list > >> >> Kea-users@lists.isc.org > >> >> https://lists.isc.org/mailman/listinfo/kea-users -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users