*** This bug is a duplicate of bug 1338706 ***
    https://bugs.launchpad.net/bugs/1338706

I have now sent a second email to Samsung's support, this time being
much more detailed about *exactly* why their drive is broken. If they
keep coming back with their retarded form-reply again, I will just keep
sending it, and will be talking to the two guys mentioned earlier who
have direct contacts at Samsung.

Here is the new email (to save time, I copied heavily from my previous
post here on this thread so readers will recognize lots of segments):

---
My Samsung 850 PRO 500gb drive came shipped with firmware EXM02B6Q from the 
factory.

This firmware revision includes SATA 3.2 spec features, but they are not
properly implemented.

The drive sets "ATA IDENTIFY's" word 77, bit 6 to 1 ("true"), which
means "RECEIVE/SEND FPDMA QUEUED supported".

But the firmware does NOT actually support RECV/SEND FPDMA QUEUED, and
just wrongly claims that it does. If you try to retrieve "log 13h" the
drive errors out, but the spec says that if RECV/SEND FPDMA is supported
then log 13h MUST also be supported.

So this is a case of Samsung's firmware department ticking a flag for
all the shiny SATA 3.2 features, and not actually making sure they
implemented them all.

A secondary problem of you incorrectly setting "ATA IDENTIFY's" word 77,
bit 6 to 1 ("true") is that FPDMA QUEUED TRIM *must* ALSO be supported
if you do that. But the drive does not support queued trim.

So the false advertisement of ATA IDENTIFY word 77 bit 6, without
actually supporting that new feature, means that the drive is severely
broken in multiple ways.

Two possible solutions to this situation:
1) A firmware update which sets "ATA IDENTIFY's" word 77, bit 6 to 0 ("FALSE!") 
instead, to PROPERLY show that the drive does NOT support SATA 3.2 FPDMA QUEUED 
features.
2) Alternatively, a firmware update which implements FPDMA QUEUED, log 13h, 
FPDMA QUEUED TRIM, etc, so that the drive actually supports what it *claims* it 
does.

Of these two, #1 is the easiest and makes the most sense. Either way,
there's a problem in the firmware and it needs a fix.

Thank you for your time,

Mark
---

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1449005

Title:
  trim does not work with Samsung 840 EVO after firmware update
  (EXT0DB6Q)

Status in fstrim package in Ubuntu:
  Invalid
Status in linux package in Ubuntu:
  Confirmed
Status in fstrim source package in Trusty:
  Invalid
Status in linux source package in Trusty:
  Fix Committed
Status in fstrim source package in Utopic:
  Invalid
Status in linux source package in Utopic:
  Fix Committed
Status in fstrim source package in Vivid:
  Invalid
Status in linux source package in Vivid:
  Fix Committed

Bug description:
  Hi,
  after updating Samsung SSD 840 EVO to the latest firmware (EXT0DB6Q) the 
fstream command doesn't work anymore. Besides, there are a lot of file system 
errors and "bad sectors" reports. The problem is certainly caused by Samsung's 
firmware but I reported it as a bug because in Windows TRIM works normally 
after the upgrade. I have attached an image uploaded by a user who is 
experiencing the same problem. If you execute the command "sudo fstrim /" the  
console gets stuck. If you add that command in rc.local the boot is 
compromised. I really hope this problem could be solved.
  Thanks

  ===
  break-fix: - 6fc4d97a4987c5d247655a157a9377996626221a
  break-fix: - 9a9324d3969678d44b330e1230ad2c8ae67acf81

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fstrim/+bug/1449005/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to