Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request.
We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/996369 Title: bond slave interface sometimes does not come up on boot Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Precise: Confirmed Status in “linux” source package in Quantal: Confirmed Status in “linux” source package in Raring: Confirmed Status in “linux” source package in Saucy: Incomplete Bug description: bug report: Hi guys, I'm running ubuntu12.04 server on a HP DL380G7. server01 ~ # lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 I've got 2 ethernet cards with 4x 10G interfaces. I've got a bond on 4x10G where only eth4 and eth6 are patched. server01 ~ # ethtool -i eth4 driver: be2net version: 4.0.100u firmware-version: 4.0.360.15 bus-info: 0000:0e:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no server01 ~ # ethtool -i eth6 driver: be2net version: 4.0.100u firmware-version: 4.0.360.15 bus-info: 0000:15:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no After a reboot I expect to see a bond0 interface with 2 RUNNING SLAVE interfaces. However, sometimes I only see 1 interface coming up in the bond after a reboot and when I manually bring the other interface up (ifconfig eth6 up) it works: # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 2 Number of ports: 1 Actor Key: 33 Partner Key: 32773 Partner Mac Address: 00:23:04:ee:be:01 Slave Interface: eth6 MII Status: down <<<<<<<<<<<< SHOULD BE UP Speed: 10000 Mbps Duplex: full Link Failure Count: 1 Permanent HW addr: 00:9c:02:3c:c9:70 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up <<<<<<<<<<<< ONLY INTERFACE THAT IS UP Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:99:98 Aggregator ID: 2 Slave queue ID: 0 Slave Interface: eth7 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:c9:74 Aggregator ID: 3 Slave queue ID: 0 Slave Interface: eth5 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:99:9c Aggregator ID: 4 Slave queue ID: 0 server01 ~ # ifconfig bond0 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 inet6 addr: fe80::29c:2ff:fe3c:c970/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:169071 errors:0 dropped:54 overruns:0 frame:0 TX packets:1236 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18435358 (18.4 MB) TX bytes:174727 (174.7 KB) eth4 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:169071 errors:0 dropped:45 overruns:0 frame:0 TX packets:1235 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18435358 (18.4 MB) TX bytes:174637 (174.6 KB) eth5 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth7 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1333 errors:0 dropped:0 overruns:0 frame:0 TX packets:1333 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:102784 (102.7 KB) TX bytes:102784 (102.7 KB) vlan888 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 inet addr:1.1.0.50 Bcast:1.1.0.63 Mask:255.255.255.240 inet6 addr: 2222:2222:ffff::11/124 Scope:Global inet6 addr: fe80::29c:2ff:fe3c:c970/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:168250 errors:0 dropped:0 overruns:0 frame:0 TX packets:661 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15995674 (15.9 MB) TX bytes:41938 (41.9 KB) vlan889 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 inet addr:1.1.0.5 Bcast:1.1.0.15 Mask:255.255.255.240 inet6 addr: 2222:2222:ffff::105/120 Scope:Global inet6 addr: fe80::29c:2ff:fe3c:c970/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:708 errors:0 dropped:0 overruns:0 frame:0 TX packets:571 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:59088 (59.0 KB) TX bytes:126565 (126.5 KB) server01 ~ # ifconfig eth6 up logging in /var/log/syslog: May 8 07:35:14 server01 kernel: [ 201.620795] 8021q: adding VLAN 0 to HW filter on device eth6 May 8 07:35:14 server01 kernel: [ 201.627183] bonding: bond0: link status definitely up for interface eth6, 10000 Mbps full duplex. # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 2 Number of ports: 2 Actor Key: 33 Partner Key: 32773 Partner Mac Address: 00:23:04:ee:be:01 Slave Interface: eth6 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 1 Permanent HW addr: 00:9c:02:3c:c9:70 Aggregator ID: 2 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:99:98 Aggregator ID: 2 Slave queue ID: 0 Slave Interface: eth7 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:c9:74 Aggregator ID: 3 Slave queue ID: 0 Slave Interface: eth5 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:99:9c Aggregator ID: 4 Slave queue ID: 0 Network configuration: # cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth4 eth5 eth6 eth7 iface eth4 inet manual bond-master bond0 iface eth5 inet manual bond-master bond0 iface eth6 inet manual bond-master bond0 iface eth7 inet manual bond-master bond0 auto bond0 iface bond0 inet static bond-slaves none bond-mode 802.3ad bond-miimon 100 address 0.0.0.0 netmask 0.0.0.0 ip-proxy-arp 0 auto vlan888 iface vlan888 inet static vlan_raw_device bond0 address 1.1.0.50 netmask 255.255.255.240 ip-proxy-arp 0 post-up sysctl -w net.ipv4.conf.${IFACE}.forwarding=1 post-up ip route add 192.168.1.0/24 via 1.1.0.53 post-up ip route add 1.1.0.32/28 via 1.1.0.53 post-up ip route add 0.0.0.0/0 via 1.1.0.53 iface vlan888 inet6 static vlan_raw_device bond0 address 2222:2222:ffff::11 netmask 124 post-up sysctl -w net.ipv6.conf.${IFACE}.forwarding=1 post-up ip -6 route add 2222:2222:ffff::/124 via 2222:2222:ffff::14 post-up ip -6 route add ::/0 via 2222:2222:ffff::14 auto vlan889 iface vlan889 inet static vlan_raw_device bond0 address 1.1.0.5 netmask 255.255.255.240 ip-proxy-arp 0 post-up sysctl -w net.ipv4.conf.${IFACE}.forwarding=1 post-up ip route add 10.0.0.0/8 via 1.1.0.1 post-up ip route add 192.168.0.0/12 via 1.1.0.1 post-up ip route add 1.1.0.0/20 via 1.1.0.1 post-up ip route add 2.2.0.0/24 via 1.1.0.1 post-up ip route add 3.3.0.0/24 via 1.1.0.1 iface vlan889 inet6 static vlan_raw_device bond0 address 2222:2222:ffff::105 netmask 120 post-up sysctl -w net.ipv6.conf.${IFACE}.forwarding=1 post-up ip -6 route add 2222:2222::/32 via 2222:2222:ffff::101 --- AlsaDevices: total 0 crw-rw---T 1 root audio 116, 1 May 8 07:31 seq crw-rw---T 1 root audio 116, 33 May 8 07:31 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=3a88e785-42be-4d09-a3d2-6509e148b49a InstallationMedia: Ubuntu-Server 12.04 LTS "Precise Pangolin" - Beta amd64 (20120327) MachineType: HP ProLiant DL380 G7 Package: linux (not installed) PciMultimedia: ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=db7e17c0-5861-4074-9467-cffce02483c0 ro ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 RelatedPackageVersions: linux-restricted-modules-3.2.0-24-generic N/A linux-backports-modules-3.2.0-24-generic N/A linux-firmware 1.79 RfKill: Error: [Errno 2] No such file or directory Tags: precise Uname: Linux 3.2.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 05/05/2011 dmi.bios.vendor: HP dmi.bios.version: P67 dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrP67:bd05/05/2011:svnHP:pnProLiantDL380G7:pvr:cvnHP:ct23:cvr: dmi.product.name: ProLiant DL380 G7 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/996369/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp