This bug was fixed in the package linux - 4.4.0-11.26 --------------- linux (4.4.0-11.26) xenial; urgency=low
[ Tim Gardner ] * Release Tracking Bug - LP: #1553391 * Xenial update to v4.4.4 stable release (LP: #1553179) - af_iucv: Validate socket address length in iucv_sock_bind() - gro: Make GRO aware of lightweight tunnels. - net: dp83640: Fix tx timestamp overflow handling. - tunnels: Allow IPv6 UDP checksums to be correctly controlled. - lwt: fix rx checksum setting for lwt devices tunneling over ipv6 - tcp: fix NULL deref in tcp_v4_send_ack() - af_unix: fix struct pid memory leak - pptp: fix illegal memory access caused by multiple bind()s - sctp: allow setting SCTP_SACK_IMMEDIATELY by the application - net: dsa: fix mv88e6xxx switches - tipc: fix connection abort during subscription cancel - inet: frag: Always orphan skbs inside ip_defrag() - switchdev: Require RTNL mutex to be held when sending FDB notifications - tcp: beware of alignments in tcp_get_info() - ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail() - ipv6/udp: use sticky pktinfo egress ifindex on connect() - ipv6: addrconf: Fix recursive spin lock call - ipv6: fix a lockdep splat - unix: correctly track in-flight fds in sending process user_struct - tcp: do not drop syn_recv on all icmp reports - net:Add sysctl_max_skb_frags - tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs - enic: increment devcmd2 result ring in case of timeout - sctp: translate network order to host order when users get a hmacid - net: Copy inner L3 and L4 headers as unaligned on GRE TEB - flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen - bpf: fix branch offset adjustment on backjumps after patching ctx expansion - bonding: Fix ARP monitor validation - ipv4: fix memory leaks in ip_cmsg_send() callers - af_unix: Don't set err in unix_stream_read_generic unless there was an error - af_unix: Guard against other == sk in unix_dgram_sendmsg - tipc: fix premature addition of node to lookup table - tcp: md5: release request socket instead of listener - qmi_wwan: add "4G LTE usb-modem U901" - net/mlx4_en: Count HW buffer overrun only once - net/mlx4_en: Avoid changing dev->features directly in run-time - l2tp: Fix error creating L2TP tunnels - pppoe: fix reference counting in PPPoE proxy - net_sched fix: reclassification needs to consider ether protocol changes - route: check and remove route cache when we get route - tcp/dccp: fix another race at listener dismantle - IFF_NO_QUEUE: Fix for drivers not calling ether_setup() - rtnl: RTM_GETNETCONF: fix wrong return value - tipc: unlock in error path - unix_diag: fix incorrect sign extension in unix_lookup_by_ino - sctp: Fix port hash table size computation - ext4: fix bh->b_state corruption - ARM: debug-ll: fix BCM63xx entry for multiplatform - arm64: errata: Add -mpc-relative-literal-loads to build flags - KVM: s390: fix guest fprs memory leak - devm_memremap: Fix error value when memremap failed - drm/gma500: Use correct unref in the gem bo create function - ARM: 8457/1: psci-smp is built only for SMP - lib/ucs2_string: Add ucs2 -> utf8 helper functions - efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version - efi: Do variable name validation tests in utf8 - efi: Make our variable validation list include the guid - efi: Make efivarfs entries immutable by default - efi: Add pstore variables to the deletion whitelist - lib/ucs2_string: Correct ucs2 -> utf8 conversion - bcache: fix a livelock when we cause a huge number of cache misses - bcache: Add a cond_resched() call to gc - bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device - bcache: fix a leak in bch_cached_dev_run() - bcache: unregister reboot notifier if bcache fails to unregister device - bcache: allows use of register in udev to avoid "device_busy" error. - bcache: Change refill_dirty() to always scan entire disk if necessary - dm thin: fix race condition when destroying thin pool workqueue - can: ems_usb: Fix possible tx overflow - usb: dwc3: Fix assignment of EP transfer resources - USB: cp210x: add IDs for GE B650V3 and B850V3 boards - USB: option: add support for SIM7100E - USB: option: add "4G LTE usb-modem U901" - drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE - spi: omap2-mcspi: Prevent duplicate gpio_request - iw_cxgb3: Fix incorrectly returning error on success - drm/i915: shut up gen8+ SDE irq dmesg noise - ocfs2: unlock inode if deleting inode from orphan fails - mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED - mm: numa: quickly fail allocations for NUMA balancing on full nodes - genirq: Validate action before dereferencing it in handle_irq_event_percpu() - clocksource/drivers/vt8500: Increase the minimum delta - s390/kvm: remove dependency on struct save_area definition - KVM: s390: fix memory overwrites when vx is disabled - Btrfs: add missing brelse when superblock checksum fails - Btrfs: igrab inode in writepage - btrfs: statfs: report zero available if metadata are exhausted - Btrfs: send, don't BUG_ON() when an empty symlink is found - Btrfs: fix number of transaction units required to create symlink - Btrfs: fix transaction handle leak on failure to create hard link - Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots - btrfs: initialize the seq counter in struct btrfs_device - s390: fix normalization bug in exception table sorting - s390/dasd: prevent incorrect length error under z/VM after PAV changes - s390/dasd: fix refcount for PAV reassignment - s390/dasd: fix performance drop - uml: flush stdout before forking - uml: fix hostfs mknod() - um: link with -lpthread - locks: fix unlock when fcntl_setlk races with a close - rtlwifi: rtl_pci: Fix kernel panic - rtlwifi: rtl8192cu: Add missing parameter setup - rtlwifi: rtl8192ce: Fix handling of module parameters - rtlwifi: rtl8192de: Fix incorrect module parameter descriptions - rtlwifi: rtl8723ae: Fix initialization of module parameters - rtlwifi: rtl8192se: Fix module parameter initialization - rtlwifi: rtl8188ee: Fix module parameter initialization - rtlwifi: rtl8723be: Fix module parameter initialization - mei: fix fasync return value on error - mei: validate request value in client notify request ioctl - namei: ->d_inode of a pinned dentry is stable only for positives - rc: sunxi-cir: Initialize the spinlock properly - media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode - si2157: return -EINVAL if firmware blob is too big - gspca: ov534/topro: prevent a division by 0 - vb2: fix a regression in poll() behavior for output,streams - tda1004x: only update the frontend properties if locked - dm space map metadata: remove unused variable in brb_pop() - dm snapshot: fix hung bios when copy error occurs - dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths - coresight: checking for NULL string in coresight_name_match() - irqchip/omap-intc: Add support for spurious irq handling - irqchip/mxs: Add missing set_handle_irq() - irqchip/atmel-aic: Fix wrong bit operation for IRQ priority - irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1 - posix-clock: Fix return code on the poll method's error path - clockevents/tcb_clksrc: Prevent disabling an already disabled clock - mmc: usdhi6rol0: handle NULL data in timeout - mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT - mmc: sdio: Fix invalid vdd in voltage switch power cycle - mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400 - mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off() - mmc: core: Enable tuning according to the actual timing - mmc: mmci: fix an ages old detection error - mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL - mmc: pxamci: fix again read-only gpio detection polarity - mmc: sdhci-pci: Fix card detect race for Intel BXT/APL - mmc: sdhci: Allow override of mmc host operations - mmc: sdhci: Allow override of get_cd() called from sdhci_request() - Bluetooth: Use continuous scanning when creating LE connections - Bluetooth: Add support of Toshiba Broadcom based devices - Bluetooth: Fix incorrect removing of IRKs - Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences - Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets - time: Avoid signed overflow in timekeeping_get_ns() - cputime: Prevent 32bit overflow in time[val|spec]_to_cputime() - Revert "MIPS: Fix PAGE_MASK definition" - MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handler - MIPS: hpet: Choose a safe value for the ETIME check - MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefs - MIPS: Fix buffer overflow in syscall_get_arguments() - EDAC: Robustify workqueues destruction - EDAC, mc_sysfs: Fix freeing bus' name - sparc64: fix incorrect sign extension in sys_sparc64_personality - clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqs - regulator: axp20x: Fix GPIO LDO enable value for AXP22x - regulator: mt6311: MT6311_REGULATOR needs to select REGMAP_I2C - virtio_balloon: fix race by fill and leak - virtio_balloon: fix race between migration and ballooning - virtio_pci: fix use after free on release - drm/vmwgfx: Fix an incorrect lock check - drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates - drm/vmwgfx: respect 'nomodeset' - drm/amdgpu: Fix off-by-one errors in amdgpu_vm_bo_map - drm/amdgpu: call hpd_irq_event on resume - drm/amdgpu: fix lost sync_to if scheduler is enabled. - drm/amdgpu: fix tonga smu resume - drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2 - drm/amdgpu: no need to load MC firmware on fiji - drm/amdgpu: move gmc7 support out of CIK dependency - drm/amdgpu: iceland use CI based MC IP - drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above - drm/amdgpu: pull topaz gmc bits into gmc_v7 - drm/amdgpu: drop topaz support from gmc8 module - drm/amdgpu: don't load MEC2 on topaz - drm/amdgpu: remove exp hardware support from iceland - drm/amdgpu: fix s4 resume - drm/amdgpu: remove unnecessary forward declaration - drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2) - drm/amdgpu: fix issue with overlapping userptrs - drm/amdgpu: use post-decrement in error handling - drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc. - drm/amdgpu/pm: adjust display configuration after powerstate - drm/nouveau/kms: take mode_config mutex in connector hotplug path - drm/nouveau/display: Enable vblank irqs after display engine is on again. - drm/nouveau/disp/dp: ensure sink is powered up before attempting link training - drm/nouveau: platform: Fix deferred probe - drm/dp/mst: process broadcast messages correctly - drm/dp/mst: always send reply for UP request - drm/dp/mst: fix in MSTB RAD initialization - drm/dp/mst: fix in RAD element access - drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil - drm/dp/mst: Calculate MST PBN with 31.32 fixed point - drm/dp/mst: move GUID storage from mgr, port to only mst branch - drm/dp/mst: Reverse order of MST enable and clearing VC payload table. - drm/dp/mst: deallocate payload on port destruction - drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr - drm/radeon: call hpd_irq_event on resume - drm/radeon: Fix "slow" audio over DP on DCE8+ - drm/radeon: clean up fujitsu quirks - drm/radeon: properly byte swap vce firmware setup - drm/radeon: cleaned up VCO output settings for DP audio - drm/radeon: Add a common function for DFS handling - drm/radeon: fix DP audio support for APU with DCE4.1 display engine - drm: add helper to check for wc memory support - drm/radeon: mask out WC from BO on unsupported arches - drm/radeon: hold reference to fences in radeon_sa_bo_new - drm: fix missing reference counting decrease - drm/i915: Restore inhibiting the load of the default context - drm/i915: intel_hpd_init(): Fix suspend/resume reprobing - drm/i915: Init power domains early in driver load - drm/i915: Make sure DC writes are coherent on flush. - drm/i915/dp: fall back to 18 bpp when sink capability is unknown - drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+ - drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select() - drm/i915/dsi: defend gpio table against out of bounds access - drm/i915/dsi: don't pass arbitrary data to sideband - drm/i915: fix error path in intel_setup_gmbus() - drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command - drm/radeon: use post-decrement in error handling - drm: No-Op redundant calls to drm_vblank_off() (v2) - drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2) - drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4 - drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2) - drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2) - drm/radeon/pm: adjust display configuration after powerstate - make sure that freeing shmem fast symlinks is RCU-delayed - toshiba_acpi: Fix blank screen at boot if transflective backlight is supported - ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list - ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list - uapi: update install list after nvme.h rename - lib: sw842: select crc32 - ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700 - ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830 - ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist" - ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot() - nfit: fix multi-interface dimm handling, acpi6.1 compatibility - dmaengine: dw: fix cyclic transfer setup - dmaengine: dw: fix cyclic transfer callbacks - dmaengine: at_xdmac: fix resume for cyclic transfers - dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer - IB/cm: Fix a recently introduced deadlock - IB/qib: fix mcast detach when qp not attached - IB/qib: Support creating qps with GFP_NOIO flag - IB/mlx5: Expose correct maximum number of CQE capacity - Thermal: initialize thermal zone device correctly - Thermal: handle thermal zone device properly during system sleep - Thermal: do thermal zone update after a cooling device registered - hwmon: (dell-smm) Blacklist Dell Studio XPS 8000 - hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook - hwmon: (ads1015) Handle negative conversion values correctly - cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype - cpufreq: Fix NULL reference crash while accessing policy->governor_data - seccomp: always propagate NO_NEW_PRIVS on tsync - libceph: fix ceph_msg_revoke() - libceph: don't bail early from try_read() when skipping a message - libceph: use the right footer size when skipping a message - libceph: don't spam dmesg with stray reply warnings - sd: Optimal I/O size is in bytes, not sectors - Staging: speakup: Fix getting port information - Revert "Staging: panel: usleep_range is preferred over udelay" - cdc-acm:exclude Samsung phone 04e8:685d - perf stat: Do not clean event's private stats - tick/nohz: Set the correct expiry when switching to nohz/lowres mode - rfkill: fix rfkill_fop_read wait_event usage - mac80211: Requeue work after scan complete for all VIF types. - workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup - Revert "workqueue: make sure delayed work run in local cpu" - ALSA: hda - Apply clock gate workaround to Skylake, too - ALSA: hda - Fixing background noise on Dell Inspiron 3162 - target: Fix LUN_RESET active I/O handling for ACK_KREF - target: Fix LUN_RESET active TMR descriptor handling - target: Fix TAS handling for multi-session se_node_acls - target: Fix remote-port TMR ABORT + se_cmd fabric stop - target: Fix race with SCF_SEND_DELAYED_TAS handling - spi: atmel: fix gpio chip-select in case of non-DT platform - libata: fix sff host state machine locking while polling - ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2 - ARCv2: SMP: Emulate IPI to self using software triggered interrupt - PCI/AER: Flush workqueue on device remove to avoid use-after-free - cpuset: make mm migration asynchronous - cgroup: make sure a parent css isn't offlined before its children - writeback: keep superblock pinned during cgroup writeback association switches - phy: core: fix wrong err handle for phy_power_on - i2c: i801: Adding Intel Lewisburg support for iTCO - bio: return EINTR if copying to user space got interrupted - block: fix use-after-free in dio_bio_complete - nfs: fix nfs_size_to_loff_t - NFSv4: Fix a dentry leak on alias use - of/irq: Fix msi-map calculation for nonzero rid-base - KVM: async_pf: do not warn on page allocation failures - KVM: arm/arm64: vgic: Ensure bitmaps are long enough - KVM: x86: fix missed hardware breakpoints - KVM: x86: MMU: fix ubsan index-out-of-range warning - powerpc/eeh: Fix partial hotplug criterion - tracing: Fix showing function event in available_events - sunrpc/cache: fix off-by-one in qword_get() - kernel/resource.c: fix muxed resource handling in __request_region() - do_last(): don't let a bogus return value from ->open() et.al. to confuse us - ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption - ARM: at91/dt: fix typo in sama5d2 pinmux descriptions - xen/arm: correctly handle DMA mapping of compound pages - xen/scsiback: correct frontend counting - xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY - xen/pciback: Save the number of MSI-X entries to be copied later. - xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. - should_follow_link(): validate ->d_seq after having decided to follow - do_last(): ELOOP failure exit should be done after leaving RCU mode - hpfs: don't truncate the file when delete fails - x86/irq: Call chip->irq_set_affinity in proper context - x86/irq: Fix a race in x86_vector_free_irqs() - x86/irq: Validate that irq descriptor is still active - x86/irq: Do not use apic_chip_data.old_domain as temporary buffer - x86/irq: Reorganize the return path in assign_irq_vector - x86/irq: Reorganize the search in assign_irq_vector - x86/irq: Check vector allocation early - x86/irq: Copy vectormask instead of an AND operation - x86/irq: Get rid of code duplication - x86/irq: Remove offline cpus from vector cleanup - x86/irq: Clear move_in_progress before sending cleanup IPI - x86/irq: Remove the cpumask allocation from send_cleanup_vector() - x86/irq: Remove outgoing CPU from vector cleanup mask - x86/irq: Call irq_force_move_complete with irq descriptor - x86/irq: Plug vector cleanup race - IB/cma: Fix RDMA port validation for iWarp - iwlwifi: dvm: fix WoWLAN - iwlwifi: pcie: properly configure the debug buffer size for 8000 - iwlwifi: update and fix 7265 series PCI IDs - iwlwifi: mvm: don't allow sched scans without matches to be started - Revert "UBUNTU: SAUCE: bcache: prevent crash on changing writeback_running" - bcache: prevent crash on changing writeback_running - Linux 4.4.4 * mlx4_en didn't choose time-stamping shift value according to HW frequency (LP: #1552627) - net/mlx4_en: Choose time-stamping shift value according to HW frequency * [Ubuntu 16.04] Help to flush kernel panics to console (LP: #1552332) - target/transport: add flag to indicate CPU Affinity is observed - powerpc/powernv: Add a kmsg_dumper that flushes console output on panic - powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages * [Ubuntu 16.04] Update qla2xxx driver for POWER (QLogic) (LP: #1541456) - qla2xxx: Fix warning reported by static checker - qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM - qla2xxx: Fix stale pointer access. - qla2xxx: Use ATIO type to send correct tmr response - qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity * [s390x] zfcp.ko missing from scsi-modules udeb (LP: #1552314) - [Config] Add s390x zfcp to scsi-modules udeb -- Tim Gardner <tim.gard...@canonical.com> Wed, 02 Mar 2016 08:08:16 -0700 ** Changed in: linux (Ubuntu Xenial) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1552627 Title: mlx4_en didn't choose time-stamping shift value according to HW frequency Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Bug description: Hi, Previously, the shift value used for time-stamping was constant and didn't depend on the HW chip frequency. Change that to take the frequency into account and calculate the maximal value in cycles per wraparound of ten seconds. This time slot was chosen since it gives a good accuracy in time synchronization. Algorithm for shift value calculation: * Round up the maximal value in cycles to nearest power of two * Calculate maximal multiplier by division of all 64 bits set to above result * Then, invert the function clocksource_khz2mult() to get the shift from maximal mult value below is the upstream commit that should fix the issue commit 31c128b66e5b28f468076e4f3ca3025c35342041 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1552627/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp