You have been subscribed to a public bug:
The new installed Ubuntu 10.04 on my Eee PC 900A switch WLAN and LAN
on/off by pressing the WIFI hotkey.
But this hotkey should only turn the WLAN on/off, not the normal LAN.
This problem was not pressed in the old Ubuntu 9.10 .
After installing Ubuntu 10.04, i start the Ubuntu 9.10 Live-CD on USB-Stick to
test the WIFI hotkey on Ubuntu 9.10 again.
He works perfect.
I don't know if helps: If i lock in /sys/class/net, i see the directories of
eth1 and wlan0.
If i hit the WIFI hotkey to deactivate, eth1 directory is complete removed and
only wlan0 is pressed.
I hit WIFI hotkey again to activate, the eth1 directory is back and the normal
LAN runs perfect to.
Only the WLAN can not find or connect to to WLAN's after deactivating, but this
is another bug.
I don't know why the LAN in Ubuntu 10.04 labeled as eth1 and not eth0. In
Ubuntu 9.10 was it eth0.
My Eee PC has no bluethooth.
Output of "acpi_listen" if i preesing the WIFI hotkey:
hotkey ATKD 00000010 00000000
-----------------------------------------------------------------
!!!UPDATE: I have add two Log-Files.
1. syslog after system start and user login
2. syslog afer peressing Fn-F2
-----------------------------------------------------------------
-----------------------------------------------------------------
System info:
---------------------------------------------------------------
lsb_release -rd:
Description: Ubuntu 10.04 LTS
Release: 10.04
--------------------------------------------------------------
uname -a:
Linux Eee-PC-900A 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
i686 GNU/Linux
--------------------------------------------------------------
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller
Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev
02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev
02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev
02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller
#1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
#2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
#3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
#4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller
(rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE
Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Atheros
AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless
Network Adapter (rev 01)
--------------------------------------------------------------
lsmod:
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
snd_hda_codec_realtek 203168 1
joydev 8708 0
snd_hda_intel 21877 2
snd_hda_codec 74201 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
arc4 1153 2
snd_seq_oss 26726 0
snd_seq_midi 4557 0
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
snd_rawmidi 19056 1 snd_seq_midi
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ath5k 121792 0
i915 282354 2
mac80211 204922 1 ath5k
uvcvideo 56990 0
usbhid 36110 0
drm_kms_helper 29297 1 i915
ath 7611 1 ath5k
snd 54148 16
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 63245 0
videodev 34361 1 uvcvideo
hid 67032 1 usbhid
drm 162471 3 i915,drm_kms_helper
i2c_algo_bit 5028 1 i915
cfg80211 126485 3 ath5k,mac80211,ath
v4l1_compat 13251 2 uvcvideo,videodev
intel_agp 24177 2 i915
soundcore 6620 1 snd
serio_raw 3978 0
eeepc_laptop 12847 0
led_class 2864 1 ath5k
video 17375 1 i915
output 1871 1 video
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
agpgart 31724 2 drm,intel_agp
lp 7028 0
parport 32635 2 ppdev,lp
atl1e 28018 0
----------------------------------------------------------------
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version
4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
(Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] modified: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] modified: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] modified: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2f25f000 - 2f9f7e70
[ 0.000000] ACPI: RSDP 000fb8e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 06000911 MSFT
00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 06000911 MSFT
00000097)
[ 0.000000] ACPI: DSDT 3f7a0430 05B23 (v01 A1054 A1054000 00000000 INTL
20051117)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 06000911 MSFT
00000097)
[ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 06000911 MSFT
00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 06000911 MSFT
00000097)
[ 0.000000] ACPI: HPET 3f7a5f60 00038 (v01 A_M_I_ OEMHPET 06000911 MSFT
00000097)
[ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL
20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000
- 00008d9e98]
[ 0.000000] #4 [002f25f000 - 002f9f7e70] RAMDISK ==> [002f25f000
- 002f9f7e70]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd1f8] BRK ==> [00008da000
- 00008dd1f8]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000
- 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000
- 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259887
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map
c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32418 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap:
3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 257855
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic
root=UUID=eb385ef4-612b-474f-b396-347a0e838f4a ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5199680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7a0)
[ 0.000000] Memory: 1008920k/1040000k available (4673k kernel code, 29992k
reserved, 2122k data, 656k init, 130696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.950 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3191.90 BogoMIPS (lpj=6383800)
[ 0.004047] Security Framework initialized
[ 0.004090] AppArmor: AppArmor initialized
[ 0.004106] Mount-cache hash table entries: 512
[ 0.004341] Initializing cgroup subsys ns
[ 0.004351] Initializing cgroup subsys cpuacct
[ 0.004361] Initializing cgroup subsys memory
[ 0.004375] Initializing cgroup subsys devices
[ 0.004381] Initializing cgroup subsys freezer
[ 0.004387] Initializing cgroup subsys net_cls
[ 0.004425] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004432] CPU: L2 cache: 512K
[ 0.004437] CPU: Physical Processor ID: 0
[ 0.004441] CPU: Processor Core ID: 0
[ 0.004448] mce: CPU supports 5 MCE banks
[ 0.004465] CPU0: Thermal monitoring enabled (TM2)
[ 0.008015] using mwait in idle threads.
[ 0.008027] Performance Events: Atom events, Intel PMU driver.
[ 0.008043] ... version: 3
[ 0.008048] ... bit width: 40
[ 0.008053] ... generic registers: 2
[ 0.008058] ... value mask: 000000ffffffffff
[ 0.008063] ... max period: 000000007fffffff
[ 0.008068] ... fixed-purpose events: 3
[ 0.008072] ... event mask: 0000000700000003
[ 0.008081] Checking 'hlt' instruction... OK.
[ 0.024009] Disabling 4MB page tables to avoid TLB bug
[ 0.028415] ACPI: Core revision 20090903
[ 0.044020] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044031] ftrace: allocating 21771 entries in 43 pages
[ 0.048113] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090757] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.176056] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.176085] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180034] Brought up 2 CPUs
[ 0.180042] Total of 2 processors activated (6383.84 BogoMIPS).
[ 0.180287] CPU0 attaching sched-domain:
[ 0.180296] domain 0: span 0-1 level SIBLING
[ 0.180302] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.180316] domain 1: span 0-1 level MC
[ 0.180321] groups: 0-1 (cpu_power = 1178)
[ 0.180334] CPU1 attaching sched-domain:
[ 0.180339] domain 0: span 0-1 level SIBLING
[ 0.180344] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.180355] domain 1: span 0-1 level MC
[ 0.180360] groups: 0-1 (cpu_power = 1178)
[ 0.180592] devtmpfs: initialized
[ 0.180592] regulator: core version 0.5
[ 0.180592] Time: 13:36:14 Date: 05/05/10
[ 0.180592] NET: Registered protocol family 16
[ 0.180592] Trying to unpack rootfs image as initramfs...
[ 0.180592] EISA bus registered
[ 0.180605] ACPI: bus type pci registered
[ 0.180777] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.180786] PCI: Not using MMCONFIG.
[ 0.181129] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.181137] PCI: Using configuration type 1 for base access
[ 0.186296] bio: create slab <bio-0> at 0
[ 0.188995] ACPI: EC: Look up EC in DSDT
[ 0.192084] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.205651] ACPI: Interpreter enabled
[ 0.205675] ACPI: (supports S0 S3 S4 S5)
[ 0.205751] ACPI: Using IOAPIC for interrupt routing
[ 0.205896] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.211219] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.211228] PCI: Using MMCONFIG for extended config space
[ 0.228535] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.229102] ACPI: No dock devices found.
[ 0.229490] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.229707] pci 0000:00:02.0: reg 10 32bit mmio: [0xf3e00000-0xf3e7ffff]
[ 0.229721] pci 0000:00:02.0: reg 14 io port: [0xcc00-0xcc07]
[ 0.229734] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.229746] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf3dc0000-0xf3dfffff]
[ 0.229816] pci 0000:00:02.1: reg 10 32bit mmio: [0xf3e80000-0xf3efffff]
[ 0.229984] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3db8000-0xf3dbbfff]
[ 0.230073] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.230085] pci 0000:00:1b.0: PME# disabled
[ 0.230217] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.230228] pci 0000:00:1c.0: PME# disabled
[ 0.230366] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.230379] pci 0000:00:1c.1: PME# disabled
[ 0.230524] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.230536] pci 0000:00:1c.3: PME# disabled
[ 0.230634] pci 0000:00:1d.0: reg 20 io port: [0xc400-0xc41f]
[ 0.230731] pci 0000:00:1d.1: reg 20 io port: [0xc480-0xc49f]
[ 0.230829] pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
[ 0.230927] pci 0000:00:1d.3: reg 20 io port: [0xc880-0xc89f]
[ 0.231030] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3db7c00-0xf3db7fff]
[ 0.231121] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.231134] pci 0000:00:1d.7: PME# disabled
[ 0.231376] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.231388] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.231400] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask
0003)
[ 0.231412] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask
0007)
[ 0.231422] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask
0003)
[ 0.231517] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.231532] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.231548] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.231563] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.231578] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.231631] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.231641] pci 0000:00:1f.2: PME# disabled
[ 0.231848] pci 0000:02:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
[ 0.232100] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.232114] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xfbffffff]
[ 0.232130] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xec000000-0xf2ffffff]
[ 0.232232] pci 0000:01:00.0: reg 10 64bit mmio: [0xf3fc0000-0xf3ffffff]
[ 0.232251] pci 0000:01:00.0: reg 18 io port: [0xdc00-0xdc7f]
[ 0.232356] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.232368] pci 0000:01:00.0: PME# disabled
[ 0.232473] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.232484] pci 0000:00:1c.3: bridge 32bit mmio: [0xf3f00000-0xf3ffffff]
[ 0.232578] pci 0000:00:1e.0: transparent bridge
[ 0.232632] pci_bus 0000:00: on NUMA node 0
[ 0.232657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.233188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.233330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.268162] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.268516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.268859] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.269226] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.269568] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.269927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.270275] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.270636] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.270987] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.271018] vgaarb: loaded
[ 0.271383] SCSI subsystem initialized
[ 0.271636] libata version 3.00 loaded.
[ 0.271903] usbcore: registered new interface driver usbfs
[ 0.271947] usbcore: registered new interface driver hub
[ 0.272073] usbcore: registered new device driver usb
[ 0.272542] ACPI: WMI: Mapper loaded
[ 0.272549] PCI: Using ACPI for IRQ routing
[ 0.273005] NetLabel: Initializing
[ 0.273012] NetLabel: domain hash size = 128
[ 0.273017] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273052] NetLabel: unlabeled traffic allowed by default
[ 0.273173] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.273190] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.276595] Switching to clocksource tsc
[ 0.280954] AppArmor: AppArmor Filesystem Enabled
[ 0.280996] pnp: PnP ACPI init
[ 0.281038] ACPI: bus type pnp registered
[ 0.286625] pnp: PnP ACPI: found 13 devices
[ 0.286635] ACPI: ACPI bus type pnp unregistered
[ 0.286645] PnPBIOS: Disabled by ACPI PNP
[ 0.286684] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.286714] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.286724] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.286734] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.286744] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.286756] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.286768] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.286779] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
[ 0.286791] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.286807] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.286820] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.286834] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.286846] system 00:08: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 0.286868] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.286879] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.286898] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.286918] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.286928] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.286938] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.286948] system 00:0c: iomem range 0x100000-0x3f7fffff could not be
reserved
[ 0.322158] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.322172] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.322186] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.322198] pci 0000:00:1c.0: PREFETCH window:
0x00000040200000-0x000000403fffff
[ 0.322226] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.322236] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.322249] pci 0000:00:1c.1: MEM window: 0xf4000000-0xfbffffff
[ 0.322261] pci 0000:00:1c.1: PREFETCH window:
0x000000ec000000-0x000000f2ffffff
[ 0.322278] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.322288] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.322301] pci 0000:00:1c.3: MEM window: 0xf3f00000-0xf3ffffff
[ 0.322313] pci 0000:00:1c.3: PREFETCH window:
0x00000040400000-0x000000405fffff
[ 0.322328] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.322335] pci 0000:00:1e.0: IO window: disabled
[ 0.322346] pci 0000:00:1e.0: MEM window: disabled
[ 0.322356] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.322387] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.322405] alloc irq_desc for 16 on node -1
[ 0.322412] alloc kstat_irqs on node -1
[ 0.322430] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.322443] pci 0000:00:1c.0: setting latency timer to 64
[ 0.322469] alloc irq_desc for 17 on node -1
[ 0.322475] alloc kstat_irqs on node -1
[ 0.322520] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.322533] pci 0000:00:1c.1: setting latency timer to 64
[ 0.322557] alloc irq_desc for 19 on node -1
[ 0.322563] alloc kstat_irqs on node -1
[ 0.322577] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.322589] pci 0000:00:1c.3: setting latency timer to 64
[ 0.322608] pci 0000:00:1e.0: setting latency timer to 64
[ 0.322622] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.322631] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.322640] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.322650] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff]
[ 0.322659] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.322669] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.322678] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff]
[ 0.322687] pci_bus 0000:02: resource 2 pref mem [0xec000000-0xf2ffffff]
[ 0.322696] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.322706] pci_bus 0000:01: resource 1 mem: [0xf3f00000-0xf3ffffff]
[ 0.322715] pci_bus 0000:01: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.322725] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.322733] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.322839] NET: Registered protocol family 2
[ 0.323118] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.324063] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.325236] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.325834] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.325844] TCP reno registered
[ 0.326153] NET: Registered protocol family 1
[ 0.326212] pci 0000:00:02.0: Boot video device
[ 0.327012] cpufreq-nforce2: No nForce2 chipset.
[ 0.327095] Scanning for low memory corruption every 60 seconds
[ 0.327409] audit: initializing netlink socket (disabled)
[ 0.327437] type=2000 audit(1273066574.326:1): initialized
[ 0.348988] highmem bounce pool size: 64 pages
[ 0.349006] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.354252] VFS: Disk quotas dquot_6.5.2
[ 0.354461] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.356536] fuse init (API version 7.13)
[ 0.356843] msgmni has been set to 1716
[ 0.357537] alg: No test for stdrng (krng)
[ 0.357746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.357756] io scheduler noop registered
[ 0.357762] io scheduler anticipatory registered
[ 0.357768] io scheduler deadline registered
[ 0.357912] io scheduler cfq registered (default)
[ 0.358243] alloc irq_desc for 24 on node -1
[ 0.358250] alloc kstat_irqs on node -1
[ 0.358274] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.358294] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.358647] alloc irq_desc for 25 on node -1
[ 0.358656] alloc kstat_irqs on node -1
[ 0.358678] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.358698] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.358993] alloc irq_desc for 26 on node -1
[ 0.359000] alloc kstat_irqs on node -1
[ 0.359017] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.359036] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.359281] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.359618] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.359903] ACPI: AC Adapter [AC0] (on-line)
[ 0.360180] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.365095] ACPI: Lid Switch [LID]
[ 0.365275] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.365286] ACPI: Sleep Button [SLPB]
[ 0.365428] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.365437] ACPI: Power Button [PWRB]
[ 0.365578] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.365587] ACPI: Power Button [PWRF]
[ 0.367628] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL
20051117)
[ 0.369082] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL
20051117)
[ 0.370258] Monitor-Mwait will be used to enter C-1 state
[ 0.370376] Monitor-Mwait will be used to enter C-2 state
[ 0.370399] Marking TSC unstable due to TSC halts in idle
[ 0.370577] processor LNXCPU:00: registered as cooling_device0
[ 0.371656] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL
20051117)
[ 0.372645] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL
20051117)
[ 0.373511] Switching to clocksource hpet
[ 0.388301] processor LNXCPU:01: registered as cooling_device1
[ 0.407050] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.407079] ACPI: Thermal Zone [TZ00] (36 C)
[ 0.412535] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.413580] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.413606] isapnp: Scanning for PnP cards...
[ 0.416583] brd: module loaded
[ 0.418006] loop: module loaded
[ 0.418266] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 0.418527] ata_piix 0000:00:1f.2: version 2.13
[ 0.418566] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.418578] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.418661] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.432441] scsi0 : ata_piix
[ 0.462745] scsi1 : ata_piix
[ 0.466710] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.466720] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.467978] Fixed MDIO Bus: probed
[ 0.468129] PPP generic driver version 2.4.2
[ 0.468278] tun: Universal TUN/TAP device driver, 1.6
[ 0.468285] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 0.468531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.468586] alloc irq_desc for 23 on node -1
[ 0.468593] alloc kstat_irqs on node -1
[ 0.468610] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.468646] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.468655] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.468748] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 0.468792] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.468815] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.472720] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.480728] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3db7c00
[ 0.496374] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.496705] usb usb1: configuration #1 chosen from 1 choice
[ 0.496793] hub 1-0:1.0: USB hub found
[ 0.496817] hub 1-0:1.0: 8 ports detected
[ 0.496987] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.497040] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497129] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.497149] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497158] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497284] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.497333] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 0.497604] usb usb2: configuration #1 chosen from 1 choice
[ 0.497687] hub 2-0:1.0: USB hub found
[ 0.497706] hub 2-0:1.0: 2 ports detected
[ 0.497832] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.497848] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.497856] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.497951] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 0.498010] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[ 0.498251] usb usb3: configuration #1 chosen from 1 choice
[ 0.498330] hub 3-0:1.0: USB hub found
[ 0.498349] hub 3-0:1.0: 2 ports detected
[ 0.498466] alloc irq_desc for 18 on node -1
[ 0.498473] alloc kstat_irqs on node -1
[ 0.498488] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.498503] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.498512] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.498603] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 0.498657] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 0.498906] usb usb4: configuration #1 chosen from 1 choice
[ 0.498985] hub 4-0:1.0: USB hub found
[ 0.499004] hub 4-0:1.0: 2 ports detected
[ 0.499125] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.499140] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.499149] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.499240] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 0.499297] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[ 0.499541] usb usb5: configuration #1 chosen from 1 choice
[ 0.499620] hub 5-0:1.0: USB hub found
[ 0.499638] hub 5-0:1.0: 2 ports detected
[ 0.499888] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 0.548645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.548676] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.549106] mice: PS/2 mouse device common for all mice
[ 0.550135] rtc_cmos 00:03: RTC can wake from S4
[ 0.550253] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.550304] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.550635] device-mapper: uevent: version 1.0.3
[ 0.574637] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 0.593963] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 0.628485] ata1.00: ATA-7: OCZSSDMPES-16G-U, 20090521, max UDMA/133
[ 0.628496] ata1.00: 31293440 sectors, multi 0: LBA
[ 0.644732] ata1.00: configured for UDMA/133
[ 0.644786] device-mapper: multipath: version 1.1.0 loaded
[ 0.644795] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.672622] EISA: Probing bus 0 at eisa.0
[ 0.672637] Cannot allocate resource for EISA slot 1
[ 0.672678] EISA: Detected 0 cards.
[ 0.711398] Freeing initrd memory: 7779k freed
[ 0.720083] cpuidle: using governor ladder
[ 0.720344] cpuidle: using governor menu
[ 0.721649] TCP cubic registered
[ 0.722146] NET: Registered protocol family 10
[ 0.723406] lo: Disabled Privacy Extensions
[ 0.724387] NET: Registered protocol family 17
[ 0.725534] Using IPI No-Shortcut mode
[ 0.725790] PM: Resume from disk failed.
[ 0.725819] registered taskstats version 1
[ 0.726435] Magic number: 10:327:634
[ 0.726584] rtc_cmos 00:03: setting system clock to 2010-05-05 13:36:15 UTC
(1273066575)
[ 0.726594] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.726599] EDD information not available.
[ 0.768069] isapnp: No Plug & Play device found
[ 0.768317] scsi 0:0:0:0: Direct-Access ATA OCZSSDMPES-16G-U 2009
PQ: 0 ANSI: 5
[ 0.768637] sd 0:0:0:0: [sda] 31293440 512-byte logical blocks: (16.0
GB/14.9 GiB)
[ 0.768674] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.768845] sd 0:0:0:0: [sda] Write Protect is off
[ 0.768855] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.768934] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.769326] sda: sda1 sda2 sda3
[ 0.770971] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.771016] Freeing unused kernel memory: 656k freed
[ 0.771615] Write protecting the kernel text: 4676k
[ 0.771690] Write protecting the kernel read-only data: 1840k
[ 0.808148] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.810794] udev: starting version 151
[ 1.018831] usb 1-2: configuration #1 chosen from 1 choice
[ 1.124340] ATL1E 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.124368] ATL1E 0000:01:00.0: setting latency timer to 64
[ 1.157530] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 1.384112] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.566400] usb 3-2: configuration #1 chosen from 1 choice
[ 3.565890] Adding 1005560k swap on /dev/sda2. Priority:-1 extents:1
across:1005560k
[ 3.650811] udev: starting version 151
[ 3.890751] lp: driver loaded but no devices found
[ 3.997110] udev: renamed network interface eth0 to eth1
[ 4.109515] Linux agpgart interface v0.103
[ 4.202186] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.202353] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.218260] eeepc_laptop: Eee PC Hotkey Driver
[ 4.218891] eeepc_laptop: Hotkey init flags 0x41
[ 4.219163] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling
anyway
[ 4.219177] eeepc_laptop: Get control methods supported: 0x2181711
[ 4.223040] input: Asus EeePC extra buttons as
/devices/platform/eeepc/input/input7
[ 4.288954] intel_rng: FWH not detected
[ 4.373869] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 4.374144] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 4.398207] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 4.536193] type=1505 audit(1273066579.309:2): operation="profile_load"
pid=554 name="/sbin/dhclient3"
[ 4.537045] type=1505 audit(1273066579.309:3): operation="profile_load"
pid=554 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 4.537511] type=1505 audit(1273066579.309:4): operation="profile_load"
pid=554 name="/usr/lib/connman/scripts/dhclient-script"
[ 4.579895] cfg80211: Calling CRDA to update world regulatory domain
[ 4.582290] [drm] Initialized drm 1.1.0 20060810
[ 4.597909] cfg80211: World regulatory domain updated:
[ 4.597921] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 4.597931] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.597940] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.597949] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.597958] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.597968] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.646085] Linux video capture interface: v2.00
[ 4.809232] uvcvideo: Found UVC 1.00 device Digital_Camera (093a:2700)
[ 4.812611] usbcore: registered new interface driver hiddev
[ 4.820379] input: Digital_Camera as
/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8
[ 4.820752] usbcore: registered new interface driver uvcvideo
[ 4.821350] USB Video Class driver (v0.1.0)
[ 4.827985] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
[ 4.828388] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10
Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.1-2/input0
[ 4.828465] usbcore: registered new interface driver usbhid
[ 4.828476] usbhid: v2.6:USB HID core driver
[ 5.018952] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.018967] i915 0000:00:02.0: setting latency timer to 64
[ 5.058265] psmouse serio1: ID: 10 00 64
[ 5.069376] ath5k 0000:02:00.0: enabling device (0000 -> 0002)
[ 5.069400] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.069428] ath5k 0000:02:00.0: setting latency timer to 64
[ 5.069511] ath5k 0000:02:00.0: registered as 'phy0'
[ 5.168113] [drm] set up 7M of stolen space
[ 5.180850] [drm] initialized overlay support
[ 5.466131] alloc irq_desc for 27 on node -1
[ 5.466141] alloc kstat_irqs on node -1
[ 5.466175] ATL1E 0000:01:00.0: irq 27 for MSI/MSI-X
[ 5.467404] ATL1E 0000:01:00.0: ATL1E: eth1 NIC Link is Up<100 Mbps Full
Duplex>
[ 5.509522] elantech.c: assuming hardware version 1, firmware version 2.34
[ 5.587350] elantech.c: Synaptics capabilities query result 0x10, 0x02, 0x64.
[ 5.587361] elantech.c: firmware version 2.34 detected, enabling jumpy
cursor workaround
[ 5.621682] fb0: inteldrmfb frame buffer device
[ 5.621690] registered panic notifier
[ 5.621711] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.648792] vga16fb: initializing
[ 5.648804] vga16fb: mapped to 0xc00a0000
[ 5.648816] vga16fb: not registering due to another framebuffer present
[ 5.700571] ath: EEPROM regdomain: 0x60
[ 5.700580] ath: EEPROM indicates we should expect a direct regpair map
[ 5.700591] ath: Country alpha2 being used: 00
[ 5.700597] ath: Regpair used: 0x60
[ 5.837262] phy0: Selected rate control algorithm 'minstrel'
[ 5.839098] Registered led device: ath5k-phy0::rx
[ 5.839152] Registered led device: ath5k-phy0::tx
[ 5.839160] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 5.943751] Console: switching to colour frame buffer device 128x37
[ 5.963317] type=1505 audit(1273066580.733:5): operation="profile_load"
pid=793 name="/usr/share/gdm/guest-session/Xsession"
[ 5.973258] type=1505 audit(1273066580.746:6): operation="profile_replace"
pid=795 name="/sbin/dhclient3"
[ 5.974012] type=1505 audit(1273066580.746:7): operation="profile_replace"
pid=795 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 5.974453] type=1505 audit(1273066580.746:8): operation="profile_replace"
pid=795 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.986031] type=1505 audit(1273066580.757:9): operation="profile_load"
pid=796 name="/usr/bin/evince"
[ 5.990423] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.052191] type=1505 audit(1273066580.825:10): operation="profile_load"
pid=796 name="/usr/bin/evince-previewer"
[ 6.091410] type=1505 audit(1273066580.861:11): operation="profile_load"
pid=796 name="/usr/bin/evince-thumbnailer"
[ 6.123634] type=1505 audit(1273066580.894:12): operation="profile_load"
pid=812 name="/usr/lib/cups/backend/cups-pdf"
[ 6.124675] type=1505 audit(1273066580.897:13): operation="profile_load"
pid=812 name="/usr/sbin/cupsd"
[ 6.147008] type=1505 audit(1273066580.917:14): operation="profile_load"
pid=815 name="/usr/sbin/tcpdump"
[ 6.275239] alloc irq_desc for 22 on node -1
[ 6.275249] alloc kstat_irqs on node -1
[ 6.275268] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 6.275357] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.349003] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input10
[ 6.493891] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input11
[ 6.825108] ppdev: user-space parallel port driver
[ 15.768039] eth1: no IPv6 routers present
[ 3871.262184] ath5k phy0: unsupported jumbo
[ 5550.953251] ath5k phy0: unsupported jumbo
[ 8980.837033] hda-intel: azx_get_response timeout, switching to polling mode:
last cmd=0x020c0000
-----------------------------------------------------
** Affects: linux
Importance: Medium
Status: Confirmed
** Affects: linux (Ubuntu)
Importance: Undecided
Status: Incomplete
** Tags: hotkey lan wifi wlan
--
Wifi hotkey switches off wired as well as wireless interface
https://bugs.launchpad.net/bugs/575889
You received this bug notification because you are a member of Kernel Packages,
which is subscribed to linux in Ubuntu.
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
