kaeru, in order to allow additional upstream developers to examine the issue, at your earliest convenience, could you please test the latest upstream kernel available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please keep in mind the following: 1) The one to test is at the very top line at the top of the page (not the daily folder). 2) The release names are irrelevant. 3) The folder time stamps aren't indicative of when the kernel actually was released upstream. 4) Install instructions are available at https://wiki.ubuntu.com/Kernel/MainlineBuilds .
If testing on your main install would be inconvenient, one may: 1) Install Ubuntu to a different partition and then test this there. 2) Backup, or clone the primary install. If the latest kernel did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this issue is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description: kernel-fixed-upstream kernel-fixed-upstream-X.Y-rcZ Where X, and Y are the first two numbers of the kernel version, and Z is the release candidate number if it exists. If the mainline kernel does not fix the issue, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-X.Y-rcZ Please note, an error to install the kernel does not fit the criteria of kernel-bug-exists-upstream. Also, you don't need to apport-collect further unless specifically requested to do so. It is most helpful that after testing of the latest upstream kernel is complete, you mark this report Status Confirmed. Lastly, to keep this issue relevant to upstream, please continue to test the latest mainline kernel as it becomes available. Thank you for your help. ** Tags added: bios-outdated-1.30 ** Tags removed: needs-apport-collect -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1650752 Title: Thinkpad Yoga 13 fails to suspend after update to 4.8.0.30.39 Status in linux package in Ubuntu: Incomplete Bug description: It suspends then automatically resumes a few seconds later. Latest kernel update brings back screen auto-rotate feature, but also breaks suspend. Not sure if this is related. Previous few kernel releases had auto-rotate feature disabled, but suspend worked properly and did not resume from suspend automatically. [ 737.222140] PM: Syncing filesystems ... done. [ 737.233688] PM: Preparing system for sleep (mem) [ 737.234034] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 737.236194] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 737.236333] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 737.237252] PM: Suspending system (mem) [ 737.237283] Suspending console(s) (use no_console_suspend to debug) [ 737.404190] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 737.406041] sd 0:0:0:0: [sda] Stopping disk [ 738.065297] PM: suspend of devices complete after 827.881 msecs [ 738.085132] PM: late suspend of devices complete after 19.829 msecs [ 738.086363] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 738.105461] PM: noirq suspend of devices complete after 20.326 msecs [ 738.105897] ACPI: Preparing to enter system sleep state S3 [ 738.361104] ACPI : EC: EC stopped [ 738.361105] PM: Saving platform NVS memory [ 738.361121] Disabling non-boot CPUs ... [ 738.361598] Broke affinity for irq 23 [ 738.361604] Broke affinity for irq 40 [ 738.361611] Broke affinity for irq 43 [ 738.363673] smpboot: CPU 1 is now offline [ 738.386513] Broke affinity for irq 23 [ 738.386519] Broke affinity for irq 40 [ 738.386525] Broke affinity for irq 43 [ 738.386533] Broke affinity for irq 59 [ 738.387594] smpboot: CPU 2 is now offline [ 738.418497] Broke affinity for irq 1 [ 738.418508] Broke affinity for irq 9 [ 738.418513] Broke affinity for irq 12 [ 738.418520] Broke affinity for irq 23 [ 738.418523] Broke affinity for irq 40 [ 738.418526] Broke affinity for irq 42 [ 738.418528] Broke affinity for irq 43 [ 738.418534] Broke affinity for irq 59 [ 738.419573] smpboot: CPU 3 is now offline [ 738.440159] ACPI: Low-level resume complete [ 738.440235] ACPI : EC: EC started [ 738.440236] PM: Restoring platform NVS memory [ 738.440625] Enabling non-boot CPUs ... [ 738.463840] x86: Booting SMP configuration: [ 738.463841] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 738.466739] cache: parent cpu1 should not be sleeping [ 738.466961] CPU1 is up [ 738.487864] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 738.490555] cache: parent cpu2 should not be sleeping [ 738.490870] CPU2 is up [ 738.535883] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 738.538658] cache: parent cpu3 should not be sleeping [ 738.539378] CPU3 is up [ 738.549959] ACPI: Waking up from system sleep state S3 [ 739.483697] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 739.483772] PM: noirq resume of devices complete after 32.141 msecs [ 739.484169] PM: early resume of devices complete after 0.371 msecs [ 739.487691] rtc_cmos 00:01: System wakeup disabled by ACPI [ 739.488427] sd 0:0:0:0: [sda] Starting disk [ 739.531853] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 739.547494] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 739.635640] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci [ 739.783794] usb 2-4: reset full-speed USB device number 2 using xhci_hcd [ 739.802392] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 739.802641] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 739.802643] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 739.802723] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 739.802888] ata1.00: supports DRM functions and may not be fully accessible [ 739.803249] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 739.803251] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 739.803272] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 739.803357] ata1.00: supports DRM functions and may not be fully accessible [ 739.803421] ata1.00: configured for UDMA/133 [ 739.823628] usb 1-1.8: reset full-speed USB device number 5 using ehci-pci [ 740.043736] usb 2-6: reset high-speed USB device number 4 using xhci_hcd [ 740.070524] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696] [ 740.112849] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..] [ 740.112853] psmouse serio1: synaptics: quirked min/max coordinates: x [1232..5710], y [1156..4696] [ 740.303742] usb 2-5: reset full-speed USB device number 3 using xhci_hcd [ 741.002549] PM: resume of devices complete after 1518.432 msecs [ 741.002644] usb 2-4:1.0: rebind failed: -517 [ 741.002647] usb 2-4:1.1: rebind failed: -517 [ 741.002894] PM: Finishing wakeup. [ 741.002895] Restarting tasks ... --- ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: kaeru 4145 F.... pulseaudio /dev/snd/pcmC1D0p: kaeru 4145 F...m pulseaudio /dev/snd/controlC1: kaeru 4145 F.... pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 16.10 EcryptfsInUse: Yes InstallationDate: Installed on 2014-04-21 (1002 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) MachineType: LENOVO 20CD0038ME Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-34-generic root=UUID=ef5b6c06-823b-4bde-a958-9704b01ede12 ro quiet splash ProcVersionSignature: Ubuntu 4.8.0-34.36-generic 4.8.11 RelatedPackageVersions: linux-restricted-modules-4.8.0-34-generic N/A linux-backports-modules-4.8.0-34-generic N/A linux-firmware 1.161.1 Tags: yakkety Uname: Linux 4.8.0-34-generic x86_64 UpgradeStatus: Upgraded to yakkety on 2016-05-05 (258 days ago) UserGroups: adm cdrom dip libvirt libvirtd lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 02/10/2014 dmi.bios.vendor: LENOVO dmi.bios.version: GQET33WW (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 20CD0038ME dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 Pro dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGQET33WW(1.13):bd02/10/2014:svnLENOVO:pn20CD0038ME:pvrThinkPadS1Yoga:rvnLENOVO:rn20CD0038ME:rvrSDK0E50510Pro:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 20CD0038ME dmi.product.version: ThinkPad S1 Yoga dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1650752/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
