Having same same issue on HP EliteDesk 705 G3 Desktop Mini (W4V44AV) Broadcom Corporation NetXtreme BCM5762 Gigabit Ethernet PCIe (rev 10) and tg3 module
Error is triggered after the link speed is set or negotiated to 100Mbps Usually within 15sec of ping ower 100Mbps link But but works ok with 1Gbps links. Can be triggered by pluging to 100Mbps port, changin the switch port to 100Mbps or: # ethtool -s eno1 speed 100 duplex full autoneg off Netboot works until the tg3 module takes ower. Windows works ok. Tested: - multiple cables, computers and switch vendors - upgrading bios - ethtool disable eee and hardware offload - ubuntu 12.04 - 17.04 - new kernel linux-generic-hwe-16.04-edge Version: 4.11.0.14.22 - disable power management in bios - disable power management with grup switches - iommu=soft iommu=on iommu=off - disable highdma None of the workarounds that i found on Google worked for me. modinfo tg3 | grep -v alias filename: /lib/modules/4.4.0-92-generic/kernel/drivers/net/ethernet/broadcom/tg3.ko firmware: tigon/tg3_tso5.bin firmware: tigon/tg3_tso.bin firmware: tigon/tg3.bin version: 3.137 license: GPL description: Broadcom Tigon3 ethernet driver author: David S. Miller (da...@redhat.com) and Jeff Garzik (jgar...@pobox.com) srcversion: 8C06FB0EBBF221DF79133B9 depends: ptp intree: Y vermagic: 4.4.0-92-generic SMP mod_unload modversions parm: tg3_debug:Tigon3 bitmapped debugging message enable value (int) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1447664 Title: 14e4:1687 broadcom tg3 network driver disconnects under high load Status in linux package in Ubuntu: Triaged Status in linux package in Debian: New Bug description: The tg3 broadcom network driver that binds with chipset 5762 goes offline and unable to recover (even with tg3 watchdog timeout) when network transmit is under high load. Call trace: https://launchpadlibrarian.net/204185480/dmesg When this happens, only a reboot would be able to fix it. Sometimes, however, bringing the interface offline and online (via ifconfig) would recover networking. I've also tested with the latest tg3 driver (dec 2014 version) and networking is still problematic. I have also disabled TSO, GSO etc... with ethtool and the bug still surfaces. This bug may be related to the integrated Firmware. Here is the procedure to replicate the issue because it is hard to replicate it under moderate network load. 1. Bootup a machine with a broadcom 5762 NIC (ie. HP DeskElite 705) using a Ubuntu/Kubunu Live CD 14.04-15.04. 2. from another machine: start 5 sessions, repetitively copy (scp with public key authentication) a 70 meg file back and forth to the tg3 machine in each session. (not sure if this is necessary) 3. create a 1GB file on the tg3 machine, with something like dd if=/dev/urandom of=/my/test/file bs=1024 count=$((1024*1000)) 4. from another machine: repetitively scp copy that 1GB file from the tg3 machine. This can be done with something like: while [ 0 ]; do scp -i /my/scp/private.key u...@ip.of.tg3:/my/test/file /tmp done; Networking will mostly goes offline in about 10-30 minutes. WORKAROUND: Add udev rule to make the changes permanent in /etc/udev/rules.d/80-tg3-fix.rules : ACTION=="add", SUBSYSTEM=="net", ATTRS{vendor}=="0x14e4", ATTRS{device}=="0x1687", RUN+="/sbin/ethtool -K %k highdma off" ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-15-generic 3.19.0-15.15 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC1: kubuntu 3748 F.... pulseaudio /dev/snd/controlC0: kubuntu 3748 F.... pulseaudio CasperVersion: 1.360 Date: Thu Apr 23 11:16:24 2015 IwConfig: eth0 no wireless extensions. lo no wireless extensions. LiveMediaBuild: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: Hewlett-Packard HP EliteDesk 705 G1 MT ProcEnviron: LANGUAGE= TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper maybe-ubiquity quiet splash --- PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.19.0-15-generic N/A linux-backports-modules-3.19.0-15-generic N/A linux-firmware 1.143 RfKill: SourcePackage: linux UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/22/2014 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: L06 v02.15 dmi.board.asset.tag: 2UA5041TG4 dmi.board.name: 2215 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: 2UA5041TG4 dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrL06v02.15:bd10/22/2014:svnHewlett-Packard:pnHPEliteDesk705G1MT:pvr:rvnHewlett-Packard:rn2215:rvr:cvnHewlett-Packard:ct6:cvr: dmi.product.name: HP EliteDesk 705 G1 MT dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1447664/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
