shawn@budgie:~$ dmesg [ 0.000000] microcode: microcode updated early to revision 0x62, date = 2017-04-27 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-041300-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-2ubuntu1)) #201709031731 SMP Sun Sep 3 21:33:09 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-041300-generic root=UUID=5a8531ee-d89d-43d9-b3d9-f720bd123822 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000075807fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000075808000-0x0000000075808fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000075809000-0x0000000075809fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007580a000-0x000000007a844fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a845000-0x000000007abcffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007abd0000-0x000000007ac10fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ac11000-0x000000007aef5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007aef6000-0x000000007b51ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b520000-0x000000007b5fefff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007b5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b600000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x7abdd000 ACPI 2.0=0x7abdd000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x7b29f118 MEMATTR=0x78220018 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. XPS 13 9360/05JK94, BIOS 2.1.0 08/02/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x27e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7b600 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x000000007b29f118 to 0x000000007b29f150. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8e2bc0098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x23eb23000, 0x23eb23fff] PGTABLE [ 0.000000] BRK [0x23eb24000, 0x23eb24fff] PGTABLE [ 0.000000] BRK [0x23eb25000, 0x23eb25fff] PGTABLE [ 0.000000] BRK [0x23eb26000, 0x23eb26fff] PGTABLE [ 0.000000] BRK [0x23eb27000, 0x23eb27fff] PGTABLE [ 0.000000] BRK [0x23eb28000, 0x23eb28fff] PGTABLE [ 0.000000] BRK [0x23eb29000, 0x23eb29fff] PGTABLE [ 0.000000] BRK [0x23eb2a000, 0x23eb2afff] PGTABLE [ 0.000000] BRK [0x23eb2b000, 0x23eb2bfff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x33635000-0x35b11fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007ABDD000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x000000007ABDD0C8 000114 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007AC027E8 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007ABDD270 025571 (v02 DELL CBX3 01072009 INTL 20160422) [ 0.000000] ACPI: FACS 0x000000007AEF3180 000040 [ 0.000000] ACPI: APIC 0x000000007AC028F8 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007AC02980 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007AC029C8 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007AC02A78 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007AC02AB8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x000000007AC02AF0 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.000000] ACPI: BOOT 0x000000007AC02E50 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000007AC02E78 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: HPET 0x000000007AC04148 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007AC04180 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422) [ 0.000000] ACPI: UEFI 0x000000007AC04F08 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x000000007AC04F50 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: LPIT 0x000000007AC05E30 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: WSMT 0x000000007AC05EC8 000028 (v01 DELL CBX3 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007AC05EF0 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007AC06058 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007AC062F8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007AC09300 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.000000] ACPI: DBGP 0x000000007AC093E0 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000007AC09418 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007AC09470 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007AC09C20 005A8A (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.000000] ACPI: MSDM 0x000000007AC0F6B0 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SLIC 0x000000007AC0F708 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: NHLT 0x000000007AC0F880 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: BGRT 0x000000007AC0F8B0 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: TPM2 0x000000007AC0F8E8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: ASF! 0x000000007AC0F920 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: DMAR 0x000000007AC0F9C0 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x27e7d5000-0x27e7fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027e7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000075807fff] [ 0.000000] node 0: [mem 0x000000007580a000-0x000000007a844fff] [ 0.000000] node 0: [mem 0x000000007b5ff000-0x000000007b5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027e7fffff] [ 0.000000] On node 0 totalpages: 2068448 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7778 pages used for memmap [ 0.000000] DMA32 zone: 497732 pages, LIFO batch:31 [ 0.000000] Normal zone: 24480 pages used for memmap [ 0.000000] Normal zone: 1566720 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x75808000-0x75808fff] [ 0.000000] PM: Registered nosave memory: [mem 0x75809000-0x75809fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a845000-0x7abcffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7abd0000-0x7ac10fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac11000-0x7aef5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7aef6000-0x7b51ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b520000-0x7b5fefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b600000-0x7f7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8e2e3e400000 s119704 r8192 d31848 u524288 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036104 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-041300-generic root=UUID=5a8531ee-d89d-43d9-b3d9-f720bd123822 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7972400K/8273792K available (9246K kernel code, 2477K rwdata, 4048K rodata, 2320K init, 2388K bss, 301392K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37581 entries in 147 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Detected 2700.000 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.041873] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.042722] Security Framework initialized [ 0.042723] Yama: becoming mindful. [ 0.042739] AppArmor: AppArmor initialized [ 0.044162] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.044842] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.044867] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.044888] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.045085] CPU: Physical Processor ID: 0 [ 0.045085] CPU: Processor Core ID: 0 [ 0.045090] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.045090] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.045096] mce: CPU supports 8 MCE banks [ 0.045106] CPU0: Thermal monitoring enabled (TM1) [ 0.045121] process: using mwait in idle threads [ 0.045124] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.045124] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.046065] Freeing SMP alternatives memory: 36K [ 0.048795] smpboot: Max logical packages: 2 [ 0.048801] DMAR: Host address width 39 [ 0.048802] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.048809] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.048810] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.048813] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.048814] DMAR: RMRR base: 0x0000007a913000 end: 0x0000007a932fff [ 0.048815] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff [ 0.048816] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.048817] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.048819] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.048819] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.048820] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.050309] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.050310] x2apic enabled [ 0.050321] Switched APIC routing to cluster x2apic. [ 0.054357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.094082] TSC deadline timer enabled [ 0.094087] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9) [ 0.094155] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.094186] ... version: 4 [ 0.094187] ... bit width: 48 [ 0.094187] ... generic registers: 4 [ 0.094188] ... value mask: 0000ffffffffffff [ 0.094188] ... max period: 00007fffffffffff [ 0.094189] ... fixed-purpose events: 3 [ 0.094189] ... event mask: 000000070000000f [ 0.094228] Hierarchical SRCU implementation. [ 0.094994] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.095007] smp: Bringing up secondary CPUs ... [ 0.095069] x86: Booting SMP configuration: [ 0.095070] .... node #0, CPUs: #1 #2 #3 [ 0.332033] smp: Brought up 1 node, 4 CPUs [ 0.332033] smpboot: Total of 4 processors activated (21700.48 BogoMIPS) [ 0.336069] devtmpfs: initialized [ 0.336069] x86/mm: Memory block size: 128MB [ 0.336590] evm: security.selinux [ 0.336591] evm: security.SMACK64 [ 0.336591] evm: security.SMACK64EXEC [ 0.336591] evm: security.SMACK64TRANSMUTE [ 0.336592] evm: security.SMACK64MMAP [ 0.336592] evm: security.ima [ 0.336593] evm: security.capability [ 0.336605] PM: Registering ACPI NVS region [mem 0x75808000-0x75808fff] (4096 bytes) [ 0.336605] PM: Registering ACPI NVS region [mem 0x7ac11000-0x7aef5fff] (3035136 bytes) [ 0.336605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.336605] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.336605] pinctrl core: initialized pinctrl subsystem [ 0.336605] RTC time: 11:21:42, date: 09/11/17 [ 0.336605] NET: Registered protocol family 16 [ 0.336605] cpuidle: using governor ladder [ 0.336605] cpuidle: using governor menu [ 0.336605] PCCT header not found. [ 0.336605] Simple Boot Flag at 0x47 set to 0x80 [ 0.336605] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.336605] ACPI: bus type PCI registered [ 0.336605] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.336605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.336605] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.336605] PCI: Using configuration type 1 for base access [ 0.336954] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.336954] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.336954] ACPI: Added _OSI(Module Device) [ 0.336954] ACPI: Added _OSI(Processor Device) [ 0.336954] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.336954] ACPI: Added _OSI(Processor Aggregator Device) [ 0.340316] ACPI: Executed 34 blocks of module-level executable AML code [ 0.353020] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.358881] ACPI: Dynamic OEM Table Load: [ 0.358889] ACPI: SSDT 0xFFFF8E2E34778000 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.359043] ACPI: Executed 1 blocks of module-level executable AML code [ 0.359110] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.360035] ACPI: Dynamic OEM Table Load: [ 0.360041] ACPI: SSDT 0xFFFF8E2E341AE800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.360175] ACPI: Executed 1 blocks of module-level executable AML code [ 0.360560] ACPI: Dynamic OEM Table Load: [ 0.360565] ACPI: SSDT 0xFFFF8E2E34779000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.360900] ACPI: Executed 1 blocks of module-level executable AML code [ 0.361092] ACPI: Dynamic OEM Table Load: [ 0.361096] ACPI: SSDT 0xFFFF8E2E341A9C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.361230] ACPI: Executed 1 blocks of module-level executable AML code [ 0.362839] ACPI: EC: EC started [ 0.362839] ACPI: EC: interrupt blocked [ 0.367492] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.367494] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.367495] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions [ 0.367495] ACPI: Interpreter enabled [ 0.367541] ACPI: (supports S0 S3 S4 S5) [ 0.367542] ACPI: Using IOAPIC for interrupt routing [ 0.367583] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.371991] ACPI: Power Resource [WRST] (on) [ 0.372334] ACPI: Power Resource [WRST] (on) [ 0.372667] ACPI: Power Resource [WRST] (on) [ 0.372994] ACPI: Power Resource [WRST] (on) [ 0.373325] ACPI: Power Resource [WRST] (on) [ 0.373652] ACPI: Power Resource [WRST] (on) [ 0.374167] ACPI: Power Resource [WRST] (on) [ 0.374488] ACPI: Power Resource [WRST] (on) [ 0.374812] ACPI: Power Resource [WRST] (on) [ 0.375275] ACPI: Power Resource [WRST] (on) [ 0.375598] ACPI: Power Resource [WRST] (on) [ 0.375918] ACPI: Power Resource [WRST] (on) [ 0.376240] ACPI: Power Resource [WRST] (on) [ 0.376569] ACPI: Power Resource [WRST] (on) [ 0.376900] ACPI: Power Resource [WRST] (on) [ 0.377226] ACPI: Power Resource [WRST] (on) [ 0.377549] ACPI: Power Resource [WRST] (on) [ 0.378775] ACPI: Power Resource [WRST] (on) [ 0.379098] ACPI: Power Resource [WRST] (on) [ 0.379418] ACPI: Power Resource [WRST] (on) [ 0.398808] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.398812] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.399121] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.399405] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.399405] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.399997] PCI host bridge to bus 0000:00 [ 0.399999] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.400000] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.400003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.400004] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.400005] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.400005] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.400006] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.400007] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.400008] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.400009] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.400010] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.400011] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window] [ 0.400011] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.400013] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.400021] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 [ 0.400141] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 [ 0.400153] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit] [ 0.400159] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.400163] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.400294] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.400307] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit] [ 0.400504] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.400525] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit] [ 0.400596] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.400779] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.400802] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit] [ 0.401037] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.401298] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit] [ 0.402215] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.402466] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit] [ 0.403290] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.403315] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit] [ 0.403385] pci 0000:00:16.0: PME# supported from D3hot [ 0.403560] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.403634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.403791] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.403862] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.404007] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.404077] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.404226] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.404296] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.404471] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 [ 0.404694] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.404709] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff] [ 0.404862] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 0.404889] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit] [ 0.404916] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit] [ 0.404965] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.405173] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.405234] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit] [ 0.405305] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.405581] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.405585] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.405590] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.405920] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 [ 0.406241] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit] [ 0.407301] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.420452] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.420457] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.420557] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.420590] pci 0000:3b:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff] [ 0.420695] pci 0000:3b:00.0: supports D1 D2 [ 0.420696] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.432065] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.432087] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.432186] pci 0000:3c:00.0: [1c5c:1283] type 00 class 0x010802 [ 0.432218] pci 0000:3c:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit] [ 0.432334] pci 0000:3c:00.0: PME# supported from D0 D1 D3hot [ 0.444076] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.444080] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.446587] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.446633] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.446677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.446720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.446764] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.446807] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.446850] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.446893] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.449258] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.449386] ACPI: EC: interrupt unblocked [ 0.449398] ACPI: EC: event unblocked [ 0.449424] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.449425] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events [ 0.449518] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.449518] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.449518] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.449518] vgaarb: loaded [ 0.449518] SCSI subsystem initialized [ 0.449518] libata version 3.00 loaded. [ 0.449518] ACPI: bus type USB registered [ 0.449518] usbcore: registered new interface driver usbfs [ 0.449518] usbcore: registered new interface driver hub [ 0.449518] usbcore: registered new device driver usb [ 0.449518] EDAC MC: Ver: 3.0.0 [ 0.449518] Registered efivars operations [ 0.455861] PCI: Using ACPI for IRQ routing [ 0.480266] PCI: pci_cache_line_size set to 64 bytes [ 0.480647] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.480649] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.480649] e820: reserve RAM buffer [mem 0x75808000-0x77ffffff] [ 0.480650] e820: reserve RAM buffer [mem 0x7a845000-0x7bffffff] [ 0.480651] e820: reserve RAM buffer [mem 0x7b600000-0x7bffffff] [ 0.480652] e820: reserve RAM buffer [mem 0x27e800000-0x27fffffff] [ 0.480727] NetLabel: Initializing [ 0.480727] NetLabel: domain hash size = 128 [ 0.480728] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.480742] NetLabel: unlabeled traffic allowed by default [ 0.480755] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.480755] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.482180] clocksource: Switched to clocksource hpet [ 0.489612] VFS: Disk quotas dquot_6.6.0 [ 0.489628] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.489713] AppArmor: AppArmor Filesystem Enabled [ 0.489750] pnp: PnP ACPI init [ 0.490028] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.490030] system 00:00: [io 0xffff] has been reserved [ 0.490031] system 00:00: [io 0xffff] has been reserved [ 0.490032] system 00:00: [io 0xffff] has been reserved [ 0.490033] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.490034] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.490037] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.490135] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.490167] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.490169] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.490309] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.490324] pnp 00:04: Plug and Play ACPI device, IDs DLL075b PNP0f13 (active) [ 0.490562] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.490564] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.490565] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.490566] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.490567] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.490568] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.490569] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.490570] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.490571] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.490573] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.490574] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.490608] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.490609] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.490610] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.490611] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.490612] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.490613] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.490614] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.490616] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.490921] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.490922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.491936] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.491937] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.491939] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.495135] pnp: PnP ACPI: found 9 devices [ 0.502569] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.502582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 0.502603] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.502605] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.502607] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.502611] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.502614] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.502619] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.502623] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.502630] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.502634] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.502639] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.502643] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.502649] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.502650] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.502651] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.502652] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.502653] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.502654] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.502655] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.502656] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.502657] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.502658] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.502658] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.502659] pci_bus 0000:00: resource 15 [mem 0x7f800000-0xdfffffff window] [ 0.502660] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window] [ 0.502661] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.502662] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.502663] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.502664] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff] [ 0.502665] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff] [ 0.502666] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff] [ 0.502804] NET: Registered protocol family 2 [ 0.502937] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.503041] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.503198] TCP: Hash tables configured (established 65536 bind 65536) [ 0.503224] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.503245] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.503290] NET: Registered protocol family 1 [ 0.503302] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.503759] PCI: CLS 0 bytes, default 64 [ 0.503791] Unpacking initramfs... [ 1.077318] Freeing initrd memory: 37748K [ 1.077429] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0 [ 1.077432] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1 [ 1.077447] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.077449] software IO TLB [mem 0x6f9ed000-0x739ed000] (64MB) mapped at [ffff8e2c2f9ed000-ffff8e2c339ecfff] [ 1.077590] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns [ 1.077730] Scanning for low memory corruption every 60 seconds [ 1.078047] audit: initializing netlink subsys (disabled) [ 1.078128] audit: type=2000 audit(1505128903.078:1): state=initialized audit_enabled=0 res=1 [ 1.078475] Initialise system trusted keyrings [ 1.078484] Key type blacklist registered [ 1.078536] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.079510] zbud: loaded [ 1.079821] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.079982] fuse init (API version 7.26) [ 1.082366] Key type asymmetric registered [ 1.082367] Asymmetric key parser 'x509' registered [ 1.082397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.082452] io scheduler noop registered [ 1.082453] io scheduler deadline registered [ 1.082476] io scheduler cfq registered (default) [ 1.083380] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 1.083408] pcieport 0000:00:1c.4: AER enabled with IRQ 123 [ 1.083433] pcieport 0000:00:1c.5: AER enabled with IRQ 124 [ 1.083458] pcieport 0000:00:1d.0: AER enabled with IRQ 125 [ 1.083510] efifb: probing for efifb [ 1.083525] efifb: framebuffer at 0x90000000, using 8128k, total 8128k [ 1.083526] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.083526] efifb: scrolling: redraw [ 1.083527] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.087430] Console: switching to colour frame buffer device 240x67 [ 1.091152] fb0: EFI VGA frame buffer device [ 1.091158] intel_idle: MWAIT substates: 0x11142120 [ 1.091159] intel_idle: v0.4.1 model 0x8E [ 1.091362] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.093751] ACPI: AC Adapter [AC] (off-line) [ 1.094374] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.095110] ACPI: Lid Switch [LID0] [ 1.095146] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.095201] ACPI: Power Button [PBTN] [ 1.095225] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.095235] ACPI: Sleep Button [SBTN] [ 1.095258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.095386] ACPI: Power Button [PWRF] [ 1.096838] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.097388] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.097389] ACPI: Thermal Zone [THM] (25 C) [ 1.097420] GHES: HEST is not enabled! [ 1.097570] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.100306] Linux agpgart interface v0.103 [ 1.132190] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4) [ 1.140087] ACPI: Battery Slot [BAT0] (battery present) [ 2.080577] clocksource: Switched to clocksource tsc [ 2.239651] loop: module loaded [ 2.239798] libphy: Fixed MDIO Bus: probed [ 2.239799] tun: Universal TUN/TAP device driver, 1.6 [ 2.239820] PPP generic driver version 2.4.2 [ 2.239851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.239853] ehci-pci: EHCI PCI platform driver [ 2.239863] ehci-platform: EHCI generic platform driver [ 2.239875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.239876] ohci-pci: OHCI PCI platform driver [ 2.239882] ohci-platform: OHCI generic platform driver [ 2.239888] uhci_hcd: USB Universal Host Controller Interface driver [ 2.240110] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.240115] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.241204] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 2.241209] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.241297] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.241298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.241299] usb usb1: Product: xHCI Host Controller [ 2.241300] usb usb1: Manufacturer: Linux 4.13.0-041300-generic xhci-hcd [ 2.241301] usb usb1: SerialNumber: 0000:00:14.0 [ 2.241419] hub 1-0:1.0: USB hub found [ 2.241433] hub 1-0:1.0: 12 ports detected [ 2.242251] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.242255] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.242278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.242279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.242280] usb usb2: Product: xHCI Host Controller [ 2.242281] usb usb2: Manufacturer: Linux 4.13.0-041300-generic xhci-hcd [ 2.242282] usb usb2: SerialNumber: 0000:00:14.0 [ 2.242395] hub 2-0:1.0: USB hub found [ 2.242407] hub 2-0:1.0: 6 ports detected [ 2.242654] usb: port power management may be unreliable [ 2.242997] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.243636] i8042: Warning: Keylock active [ 2.245819] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.245822] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.245993] mousedev: PS/2 mouse device common for all mice [ 2.246405] rtc_cmos 00:01: RTC can wake from S4 [ 2.246851] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.246965] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.246970] i2c /dev entries driver [ 2.247049] device-mapper: uevent: version 1.0.3 [ 2.247107] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-de...@redhat.com [ 2.247110] intel_pstate: Intel P-state driver initializing [ 2.247314] intel_pstate: HWP enabled [ 2.247358] ledtrig-cpu: registered to indicate activity on CPUs [ 2.247361] EFI Variables Facility v0.08 2004-May-17 [ 2.247657] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.253036] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002) [ 2.253211] NET: Registered protocol family 10 [ 2.255729] Segment Routing with IPv6 [ 2.255743] NET: Registered protocol family 17 [ 2.255750] Key type dns_resolver registered [ 2.255931] RAS: Correctable Errors collector initialized. [ 2.255957] microcode: sig=0x806e9, pf=0x80, revision=0x62 [ 2.255985] microcode: Microcode Update Driver: v2.2. [ 2.255993] sched_clock: Marking stable (2255983565, 0)->(2257558406, -1574841) [ 2.256104] registered taskstats version 1 [ 2.256113] Loading compiled-in X.509 certificates [ 2.257652] Loaded X.509 cert 'Build time autogenerated kernel key: 2977791a6bc138cb597bcddff841bb4e6c0cdbe0' [ 2.257668] zswap: loaded using pool lzo/zbud [ 2.258681] Key type big_key registered [ 2.258684] Key type trusted registered [ 2.259586] Key type encrypted registered [ 2.259588] AppArmor: AppArmor sha1 policy hashing enabled [ 2.568122] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 2.576154] evm: HMAC attrs: 0x1 [ 2.577326] Magic number: 1:832:377 [ 2.577535] rtc_cmos 00:01: setting system clock to 2017-09-11 11:21:44 UTC (1505128904) [ 2.577668] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.577669] EDD information not available. [ 2.577701] PM: Hibernation image not present or could not be loaded. [ 2.579203] Freeing unused kernel memory: 2320K [ 2.579204] Write protecting the kernel read-only data: 14336k [ 2.579474] Freeing unused kernel memory: 980K [ 2.579549] Freeing unused kernel memory: 48K [ 2.580727] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.634244] hidraw: raw HID events driver (C) Jiri Kosina [ 2.672465] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found [ 2.672623] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002) [ 2.673846] nvme nvme0: pci function 0000:3c:00.0 [ 2.697867] [drm] Memory usable by graphics device = 4096M [ 2.697869] checking generic (90000000 7f0000) vs hw (90000000 10000000) [ 2.697870] fb: switching to inteldrmfb from EFI VGA [ 2.697889] Console: switching to colour dummy device 80x25 [ 2.697956] [drm] Replacing VGA console driver [ 2.706364] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.706365] [drm] Driver supports precise vblank timestamp query. [ 2.714973] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [ 2.715517] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.717088] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e301 [ 2.717089] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.722213] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 2.727721] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.728643] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.735274] fbcon: inteldrmfb (fb0) is primary device [ 2.836497] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 2.907811] nvme0n1: p1 p2 p3 [ 3.045618] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c [ 3.045619] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.045620] usb 1-5: Product: Integrated_Webcam_HD [ 3.045621] usb 1-5: Manufacturer: CN09GTFM724876AEBD4GA01 [ 3.596670] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734] [ 3.629272] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..] [ 3.629277] psmouse serio1: synaptics: Your touchpad (PNP: DLL075b PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-in...@vger.kernel.org. [ 3.694495] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007 [ 3.743032] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 3.808849] [drm] RC6 on [ 3.828399] Console: switching to colour frame buffer device 240x67 [ 3.847973] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.892391] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.956223] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.970095] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.970187] systemd[1]: Detected architecture x86-64. [ 3.970326] systemd[1]: Set hostname to <budgie>. [ 4.012270] systemd[1]: Listening on Syslog Socket. [ 4.012330] systemd[1]: Listening on udev Kernel Socket. [ 4.012422] systemd[1]: Created slice System Slice. [ 4.012483] systemd[1]: Created slice User and Session Slice. [ 4.012778] systemd[1]: Mounting Debug File System... [ 4.012825] systemd[1]: Listening on Journal Socket. [ 4.013195] systemd[1]: Starting Uncomplicated firewall... [ 4.027253] lp: driver loaded but no devices found [ 4.030383] ppdev: user-space parallel port driver [ 4.072538] EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro [ 4.084240] systemd-journald[236]: Received request to flush runtime journal from PID 1 [ 4.151276] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS [ 4.170367] input: Intel HID events as /devices/platform/INT33D5:00/input/input8 [ 4.170508] intel-hid INT33D5:00: platform supports 5 button array [ 4.170544] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input9 [ 4.179288] random: crng init done [ 4.198735] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input10 [ 4.229149] Bluetooth: Core ver 2.22 [ 4.229161] NET: Registered protocol family 31 [ 4.229162] Bluetooth: HCI device and connection manager initialized [ 4.229164] Bluetooth: HCI socket layer initialized [ 4.229166] Bluetooth: L2CAP socket layer initialized [ 4.229178] Bluetooth: SCO socket layer initialized [ 4.238931] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.242433] Bluetooth: HCI UART driver ver 2.3 [ 4.242440] Bluetooth: HCI UART protocol H4 registered [ 4.242441] Bluetooth: HCI UART protocol BCSP registered [ 4.243721] Bluetooth: HCI UART protocol LL registered [ 4.243721] Bluetooth: HCI UART protocol ATH3K registered [ 4.243722] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 4.243755] Bluetooth: HCI UART protocol Intel registered [ 4.243768] Bluetooth: HCI UART protocol Broadcom registered [ 4.243769] Bluetooth: HCI UART protocol QCA registered [ 4.243769] Bluetooth: HCI UART protocol AG6XX registered [ 4.243770] Bluetooth: HCI UART protocol Marvell registered [ 4.244562] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.245049] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 4.252722] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 4.268736] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 4.268995] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 4.284086] i2c_hid i2c-DLL075B:01: i2c-DLL075B:01 supply vdd not found, using dummy regulator [ 4.285503] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.293914] dell_wmi: Detected Dell WMI interface version 1 [ 4.293974] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11 [ 4.318957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.319173] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.324124] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.324125] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.324126] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.324127] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.324127] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.324128] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.348322] AVX2 version of gcm_enc/dec engaged. [ 4.348323] AES CTR mode by8 optimization enabled [ 4.384203] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002) [ 4.386239] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 4.416335] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.416527] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.434717] intel_rapl: Found RAPL domain package [ 4.434719] intel_rapl: Found RAPL domain core [ 4.434720] intel_rapl: Found RAPL domain uncore [ 4.434721] intel_rapl: Found RAPL domain dram [ 4.488518] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.488520] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.488521] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.488522] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.488523] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.488525] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 4.488526] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 4.488527] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.531302] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input13 [ 4.531394] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 4.543937] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.543995] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.544052] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 4.544098] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 4.544136] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 4.544167] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 4.591596] audit: type=1400 audit(1505128906.514:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=637 comm="apparmor_parser" [ 4.591599] audit: type=1400 audit(1505128906.514:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=637 comm="apparmor_parser" [ 4.591650] audit: type=1400 audit(1505128906.514:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=638 comm="apparmor_parser" [ 4.591652] audit: type=1400 audit(1505128906.514:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=638 comm="apparmor_parser" [ 4.591654] audit: type=1400 audit(1505128906.514:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=638 comm="apparmor_parser" [ 4.591655] audit: type=1400 audit(1505128906.514:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=638 comm="apparmor_parser" [ 4.592888] audit: type=1400 audit(1505128906.515:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=640 comm="apparmor_parser" [ 4.592891] audit: type=1400 audit(1505128906.515:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=640 comm="apparmor_parser" [ 4.592934] audit: type=1400 audit(1505128906.515:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=641 comm="apparmor_parser" [ 4.668368] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [ 4.668370] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 4.668800] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 4.734329] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 19644295 [ 4.752191] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.752192] Bluetooth: BNEP filters: protocol multicast [ 4.752195] Bluetooth: BNEP socket layer initialized [ 5.316350] media: Linux media interface: v0.10 [ 5.320876] Linux video capture interface: v2.00 [ 5.332653] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 5.352719] ath10k_pci 0000:3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 5.372480] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 5.372482] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! [ 5.372483] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 5.372484] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 5.372573] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24 [ 5.372708] usbcore: registered new interface driver uvcvideo [ 5.372709] USB Video Class driver (1.1.1) [ 5.440872] ath: EEPROM regdomain: 0x69 [ 5.440874] ath: EEPROM indicates we should expect a direct regpair map [ 5.440875] ath: Country alpha2 being used: 00 [ 5.440875] ath: Regpair used: 0x69 [ 5.447250] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 5.460567] usbcore: registered new interface driver btusb [ 5.462822] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 5.462824] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [ 5.465644] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5.490744] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 6.244089] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7.117321] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7.183727] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 11.770367] Bluetooth: RFCOMM TTY layer initialized [ 11.770373] Bluetooth: RFCOMM socket layer initialized [ 11.770377] Bluetooth: RFCOMM ver 1.11 [ 11.828723] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 11.906912] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 11.953734] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 11.954755] wlp58s0: authenticated [ 11.956199] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 11.957760] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 11.961001] wlp58s0: associated [ 11.961038] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 11.965618] ath: EEPROM regdomain: 0x8348 [ 11.965620] ath: EEPROM indicates we should expect a country code [ 11.965621] ath: doing EEPROM country->regdmn map search [ 11.965621] ath: country maps to regdmn code: 0x3a [ 11.965622] ath: Country alpha2 being used: US [ 11.965623] ath: Regpair used: 0x3a [ 11.965624] ath: regdomain 0x8348 dynamically updated by country IE [ 12.010125] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 18.034345] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170531/dswload2-346) [ 18.034365] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170531/psobject-252) [ 18.034373] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170531/psparse-550) [ 18.034385] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170531/psparse-550) [ 18.034399] ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170531/psparse-550) [ 18.034408] ACPI: Marking method _E42 as Serialized because of AE_ALREADY_EXISTS error [ 18.034417] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170531/evgpe-646) [ 18.136573] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 [ 18.136704] pci 0000:01:00.0: supports D1 D2 [ 18.136705] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 18.136951] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 [ 18.137089] pci 0000:02:00.0: supports D1 D2 [ 18.137090] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 18.137176] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 [ 18.137305] pci 0000:02:01.0: supports D1 D2 [ 18.137306] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 18.137392] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 [ 18.137525] pci 0000:02:02.0: supports D1 D2 [ 18.137525] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 18.137641] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 18.137651] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 18.137657] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 18.137723] pci 0000:03:00.0: [8086:1575] type 00 class 0x088000 [ 18.137757] pci 0000:03:00.0: reg 0x10: [mem 0xda000000-0xda03ffff] [ 18.137768] pci 0000:03:00.0: reg 0x14: [mem 0xda040000-0xda040fff] [ 18.137970] pci 0000:03:00.0: supports D1 D2 [ 18.137971] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 18.138097] pci 0000:02:00.0: PCI bridge to [bus 03] [ 18.138106] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 18.138165] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 18.138173] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 18.138180] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 18.138258] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 [ 18.138295] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff] [ 18.138468] pci 0000:39:00.0: supports D1 D2 [ 18.138469] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 18.138631] pci 0000:02:02.0: PCI bridge to [bus 39] [ 18.138640] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 18.138670] pci_bus 0000:02: Allocating resources [ 18.138706] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 18.138714] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 18.138716] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 18.138725] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 18.138729] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 18.138729] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 18.138731] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 18.138732] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 18.138735] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 18.138736] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 18.138738] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 18.138739] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 18.138740] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 18.138741] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 18.138743] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 18.138744] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 18.138745] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 18.138746] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 18.138747] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 18.138747] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 18.138749] pci 0000:02:00.0: PCI bridge to [bus 03] [ 18.138754] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 18.138763] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 18.138768] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 18.138771] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 18.138776] pci 0000:02:02.0: PCI bridge to [bus 39] [ 18.138780] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 18.138788] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 18.138792] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 18.138795] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 18.139997] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 18.141833] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 18.142997] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810 [ 18.143138] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.143139] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.143140] usb usb3: Product: xHCI Host Controller [ 18.143141] usb usb3: Manufacturer: Linux 4.13.0-041300-generic xhci-hcd [ 18.143142] usb usb3: SerialNumber: 0000:39:00.0 [ 18.143276] hub 3-0:1.0: USB hub found [ 18.143284] hub 3-0:1.0: 2 ports detected [ 18.143558] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 18.143562] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 18.143594] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.143595] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.143596] usb usb4: Product: xHCI Host Controller [ 18.143597] usb usb4: Manufacturer: Linux 4.13.0-041300-generic xhci-hcd [ 18.143598] usb usb4: SerialNumber: 0000:39:00.0 [ 18.143708] hub 4-0:1.0: USB hub found [ 18.143716] hub 4-0:1.0: 2 ports detected [ 18.145972] thunderbolt 0000:03:00.0: NHI initialized, starting thunderbolt [ 18.145977] thunderbolt 0000:03:00.0: allocating TX ring 0 of size 10 [ 18.145991] thunderbolt 0000:03:00.0: allocating RX ring 0 of size 10 [ 18.146002] thunderbolt 0000:03:00.0: control channel created [ 18.146003] thunderbolt 0000:03:00.0: control channel starting... [ 18.146004] thunderbolt 0000:03:00.0: starting TX ring 0 [ 18.146011] thunderbolt 0000:03:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1) [ 18.146012] thunderbolt 0000:03:00.0: starting RX ring 0 [ 18.146018] thunderbolt 0000:03:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001) [ 18.242900] thunderbolt 0000:03:00.0: current switch config: [ 18.242906] thunderbolt 0000:03:00.0: Switch: 8086:1576 (Revision: 4, TB Version: 2) [ 18.242909] thunderbolt 0000:03:00.0: Max Port Number: 11 [ 18.242911] thunderbolt 0000:03:00.0: Config: [ 18.242915] thunderbolt 0000:03:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms [ 18.242918] thunderbolt 0000:03:00.0: unknown1: 0x0 unknown4: 0x0 [ 18.258799] thunderbolt 0000:03:00.0: 0: uid: 0xd4771ea8f02400 [ 18.259257] thunderbolt 0000:03:00.0: Port 0: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1)) [ 18.259260] thunderbolt 0000:03:00.0: Max hop id (in/out): 7/7 [ 18.259262] thunderbolt 0000:03:00.0: Max counters: 8 [ 18.259265] thunderbolt 0000:03:00.0: NFC Credits: 0x800000 [ 18.259438] thunderbolt 0000:03:00.0: Port 1: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1)) [ 18.259441] thunderbolt 0000:03:00.0: Max hop id (in/out): 15/15 [ 18.259443] thunderbolt 0000:03:00.0: Max counters: 16 [ 18.259445] thunderbolt 0000:03:00.0: NFC Credits: 0x3c00000 [ 18.259612] thunderbolt 0000:03:00.0: Port 2: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1)) [ 18.259614] thunderbolt 0000:03:00.0: Max hop id (in/out): 15/15 [ 18.259616] thunderbolt 0000:03:00.0: Max counters: 16 [ 18.259618] thunderbolt 0000:03:00.0: NFC Credits: 0x3c00000 [ 18.259621] thunderbolt 0000:03:00.0: 0:3: disabled by eeprom [ 18.259624] thunderbolt 0000:03:00.0: 0:4: disabled by eeprom [ 18.259626] thunderbolt 0000:03:00.0: 0:5: disabled by eeprom [ 18.259677] thunderbolt 0000:03:00.0: Port 6: 8086:1576 (Revision: 4, TB Version: 1, Type: PCIe (0x100101)) [ 18.259680] thunderbolt 0000:03:00.0: Max hop id (in/out): 8/8 [ 18.259682] thunderbolt 0000:03:00.0: Max counters: 2 [ 18.259684] thunderbolt 0000:03:00.0: NFC Credits: 0x800000 [ 18.259733] thunderbolt 0000:03:00.0: Port 7: 8086:1576 (Revision: 4, TB Version: 1, Type: PCIe (0x100101)) [ 18.259735] thunderbolt 0000:03:00.0: Max hop id (in/out): 8/8 [ 18.259737] thunderbolt 0000:03:00.0: Max counters: 2 [ 18.259739] thunderbolt 0000:03:00.0: NFC Credits: 0x800000 [ 18.259741] thunderbolt 0000:03:00.0: 0:8: disabled by eeprom [ 18.259744] thunderbolt 0000:03:00.0: 0:9: disabled by eeprom [ 18.259798] thunderbolt 0000:03:00.0: Port 10: 8086:1576 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101)) [ 18.259800] thunderbolt 0000:03:00.0: Max hop id (in/out): 9/9 [ 18.259802] thunderbolt 0000:03:00.0: Max counters: 2 [ 18.259804] thunderbolt 0000:03:00.0: NFC Credits: 0x1000000 [ 18.259807] thunderbolt 0000:03:00.0: 0:b: disabled by eeprom [ 19.562643] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 19.562649] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 19.562652] pcieport 0000:00:1c.0: device [8086:9d10] error status/mask=00000001/00002000 [ 19.562654] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 20.256681] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 20.256686] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 20.256691] xhci_hcd 0000:39:00.0: can't suspend (hcd_pci_runtime_suspend returned -110) [ 1454.353136] show_signal_msg: 11 callbacks suppressed [ 1454.353140] gnome-calendar[5070]: segfault at 18 ip 0000558680bda568 sp 00007ffcf27c45a0 error 4 in gnome-calendar[558680b9c000+6c000] [ 2688.647045] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 2688.664816] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 2689.220275] PM: Syncing filesystems ... done. [ 2689.224989] PM: Preparing system for sleep (mem) [ 2689.226531] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 2689.229961] OOM killer disabled. [ 2689.229962] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2689.231243] PM: Suspending system (mem) [ 2689.231322] Suspending console(s) (use no_console_suspend to debug) [ 2689.231761] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 2689.231772] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 2689.231779] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 2689.231785] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 2689.231793] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 2689.731798] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 2689.731863] PM: Some devices failed to suspend, or early wake event detected [ 2689.731985] PM: resume of devices complete after 0.117 msecs [ 2710.236782] acpi LNXPOWER:13: Turning OFF [ 2710.236957] acpi LNXPOWER:12: Turning OFF [ 2710.237124] acpi LNXPOWER:11: Turning OFF [ 2710.237290] acpi LNXPOWER:10: Turning OFF [ 2710.237454] acpi LNXPOWER:0f: Turning OFF [ 2710.237617] acpi LNXPOWER:0e: Turning OFF [ 2710.237779] acpi LNXPOWER:0d: Turning OFF [ 2710.237943] acpi LNXPOWER:0c: Turning OFF [ 2710.238108] acpi LNXPOWER:0b: Turning OFF [ 2710.238271] acpi LNXPOWER:0a: Turning OFF [ 2710.238435] acpi LNXPOWER:09: Turning OFF [ 2710.238598] acpi LNXPOWER:08: Turning OFF [ 2710.238760] acpi LNXPOWER:07: Turning OFF [ 2710.238944] acpi LNXPOWER:06: Turning OFF [ 2710.239111] acpi LNXPOWER:05: Turning OFF [ 2710.239273] acpi LNXPOWER:04: Turning OFF [ 2710.239439] acpi LNXPOWER:03: Turning OFF [ 2710.239588] acpi LNXPOWER:02: Turning OFF [ 2710.239736] acpi LNXPOWER:01: Turning OFF [ 2710.239884] acpi LNXPOWER:00: Turning OFF [ 2710.239980] PM: Finishing wakeup. [ 2710.239982] OOM killer enabled. [ 2710.239983] Restarting tasks ... done. [ 2710.309177] PM: Syncing filesystems ... done. [ 2710.312580] PM: Preparing system for sleep (freeze) [ 2710.312791] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 2710.314610] OOM killer disabled. [ 2710.314611] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2710.315980] PM: Suspending system (freeze) [ 2710.315981] Suspending console(s) (use no_console_suspend to debug) [ 2710.316192] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 2710.316197] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 2710.316199] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 2710.316201] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 2710.316203] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 2710.316214] PM: Some devices failed to suspend, or early wake event detected [ 2710.316238] PM: resume of devices complete after 0.023 msecs [ 2730.716715] PM: Finishing wakeup. [ 2730.716717] OOM killer enabled. [ 2730.716718] Restarting tasks ... done. [ 2730.804411] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 2731.556704] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 2732.395428] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 2732.466960] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 2737.084592] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 2737.142221] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 2737.186632] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 2737.187543] wlp58s0: authenticated [ 2737.190909] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 2737.192668] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 2737.196125] wlp58s0: associated [ 2737.196269] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 2737.197898] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 2737.205737] ath: EEPROM regdomain: 0x8348 [ 2737.205741] ath: EEPROM indicates we should expect a country code [ 2737.205744] ath: doing EEPROM country->regdmn map search [ 2737.205747] ath: country maps to regdmn code: 0x3a [ 2737.205749] ath: Country alpha2 being used: US [ 2737.205751] ath: Regpair used: 0x3a [ 2737.205754] ath: regdomain 0x8348 dynamically updated by country IE [ 3071.660027] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8 [ 3071.660038] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID) [ 3071.660048] pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00001000/00002000 [ 3071.660054] pcieport 0000:00:1d.0: [12] Replay Timer Timeout [ 3631.166730] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 3631.186910] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 3631.720100] PM: Syncing filesystems ... done. [ 3631.727610] PM: Preparing system for sleep (mem) [ 3631.728203] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 3631.731119] OOM killer disabled. [ 3631.731120] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3631.732676] PM: Suspending system (mem) [ 3631.732742] Suspending console(s) (use no_console_suspend to debug) [ 3631.733097] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 3631.733106] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 3631.733111] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 3631.733115] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 3631.733118] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 3632.233127] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 3632.233193] PM: Some devices failed to suspend, or early wake event detected [ 3632.233313] PM: resume of devices complete after 0.115 msecs [ 3652.827359] acpi LNXPOWER:13: Turning OFF [ 3652.827535] acpi LNXPOWER:12: Turning OFF [ 3652.827701] acpi LNXPOWER:11: Turning OFF [ 3652.827868] acpi LNXPOWER:10: Turning OFF [ 3652.828030] acpi LNXPOWER:0f: Turning OFF [ 3652.828194] acpi LNXPOWER:0e: Turning OFF [ 3652.828356] acpi LNXPOWER:0d: Turning OFF [ 3652.828520] acpi LNXPOWER:0c: Turning OFF [ 3652.828683] acpi LNXPOWER:0b: Turning OFF [ 3652.828846] acpi LNXPOWER:0a: Turning OFF [ 3652.829016] acpi LNXPOWER:09: Turning OFF [ 3652.829164] acpi LNXPOWER:08: Turning OFF [ 3652.829311] acpi LNXPOWER:07: Turning OFF [ 3652.829477] acpi LNXPOWER:06: Turning OFF [ 3652.829628] acpi LNXPOWER:05: Turning OFF [ 3652.829775] acpi LNXPOWER:04: Turning OFF [ 3652.829922] acpi LNXPOWER:03: Turning OFF [ 3652.830070] acpi LNXPOWER:02: Turning OFF [ 3652.830218] acpi LNXPOWER:01: Turning OFF [ 3652.830365] acpi LNXPOWER:00: Turning OFF [ 3652.830461] PM: Finishing wakeup. [ 3652.830462] OOM killer enabled. [ 3652.830463] Restarting tasks ... done. [ 3652.937558] PM: Syncing filesystems ... done. [ 3652.941353] PM: Preparing system for sleep (freeze) [ 3652.941625] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3652.943599] OOM killer disabled. [ 3652.943599] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3652.944973] PM: Suspending system (freeze) [ 3652.944974] Suspending console(s) (use no_console_suspend to debug) [ 3652.945194] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 3652.945199] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 3652.945202] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 3652.945204] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 3652.945206] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 3653.445221] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 3653.445271] PM: Some devices failed to suspend, or early wake event detected [ 3653.445469] PM: resume of devices complete after 0.193 msecs [ 3673.819133] PM: Finishing wakeup. [ 3673.819134] OOM killer enabled. [ 3673.819135] Restarting tasks ... done. [ 3673.895973] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 3674.658483] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 3675.500262] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 3675.569732] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 3680.189488] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 3680.239583] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 3680.284559] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 3680.285456] wlp58s0: authenticated [ 3680.289540] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 3680.291288] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 3680.294632] wlp58s0: associated [ 3680.294784] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 3680.303940] ath: EEPROM regdomain: 0x8348 [ 3680.303943] ath: EEPROM indicates we should expect a country code [ 3680.303945] ath: doing EEPROM country->regdmn map search [ 3680.303947] ath: country maps to regdmn code: 0x3a [ 3680.303949] ath: Country alpha2 being used: US [ 3680.303950] ath: Regpair used: 0x3a [ 3680.303952] ath: regdomain 0x8348 dynamically updated by country IE [ 3680.378045] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 4203.306677] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8 [ 4203.306691] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID) [ 4203.306704] pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00001000/00002000 [ 4203.306712] pcieport 0000:00:1d.0: [12] Replay Timer Timeout [ 5429.671389] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 5429.684448] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5430.224901] PM: Syncing filesystems ... done. [ 5430.230010] PM: Preparing system for sleep (mem) [ 5430.230323] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5430.232306] OOM killer disabled. [ 5430.232307] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5430.233633] PM: Suspending system (mem) [ 5430.233672] Suspending console(s) (use no_console_suspend to debug) [ 5430.233860] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 5430.233865] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 5430.233868] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 5430.233870] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 5430.233872] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 5430.733871] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 5430.733936] PM: Some devices failed to suspend, or early wake event detected [ 5430.734070] PM: resume of devices complete after 0.130 msecs [ 5451.227994] acpi LNXPOWER:13: Turning OFF [ 5451.228170] acpi LNXPOWER:12: Turning OFF [ 5451.228337] acpi LNXPOWER:11: Turning OFF [ 5451.228504] acpi LNXPOWER:10: Turning OFF [ 5451.228667] acpi LNXPOWER:0f: Turning OFF [ 5451.228830] acpi LNXPOWER:0e: Turning OFF [ 5451.228993] acpi LNXPOWER:0d: Turning OFF [ 5451.229158] acpi LNXPOWER:0c: Turning OFF [ 5451.229321] acpi LNXPOWER:0b: Turning OFF [ 5451.229484] acpi LNXPOWER:0a: Turning OFF [ 5451.229649] acpi LNXPOWER:09: Turning OFF [ 5451.229813] acpi LNXPOWER:08: Turning OFF [ 5451.229975] acpi LNXPOWER:07: Turning OFF [ 5451.230170] acpi LNXPOWER:06: Turning OFF [ 5451.230336] acpi LNXPOWER:05: Turning OFF [ 5451.230499] acpi LNXPOWER:04: Turning OFF [ 5451.230661] acpi LNXPOWER:03: Turning OFF [ 5451.230824] acpi LNXPOWER:02: Turning OFF [ 5451.230987] acpi LNXPOWER:01: Turning OFF [ 5451.231150] acpi LNXPOWER:00: Turning OFF [ 5451.231256] PM: Finishing wakeup. [ 5451.231258] OOM killer enabled. [ 5451.231259] Restarting tasks ... done. [ 5451.295504] PM: Syncing filesystems ... done. [ 5451.298857] PM: Preparing system for sleep (freeze) [ 5451.299070] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5451.300982] OOM killer disabled. [ 5451.300983] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5451.302229] PM: Suspending system (freeze) [ 5451.302230] Suspending console(s) (use no_console_suspend to debug) [ 5451.302459] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 5451.302464] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 5451.302466] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 5451.302469] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 5451.302471] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 5451.802487] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 5451.802538] PM: Some devices failed to suspend, or early wake event detected [ 5451.802635] i2c i2c-7: Unbalanced pm_runtime_enable! [ 5451.802684] PM: resume of devices complete after 0.143 msecs [ 5472.219717] PM: Finishing wakeup. [ 5472.219718] OOM killer enabled. [ 5472.219719] Restarting tasks ... done. [ 5472.283716] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5473.033200] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5473.876667] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5473.945583] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5478.563788] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5478.600241] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 5478.645083] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 5478.646039] wlp58s0: authenticated [ 5478.650302] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 5478.652070] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 5478.655313] wlp58s0: associated [ 5478.655454] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 5478.663905] ath: EEPROM regdomain: 0x8348 [ 5478.663908] ath: EEPROM indicates we should expect a country code [ 5478.663912] ath: doing EEPROM country->regdmn map search [ 5478.663915] ath: country maps to regdmn code: 0x3a [ 5478.663918] ath: Country alpha2 being used: US [ 5478.663920] ath: Regpair used: 0x3a [ 5478.663923] ath: regdomain 0x8348 dynamically updated by country IE [ 5478.681565] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 6372.606165] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 6372.618109] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6373.166288] PM: Syncing filesystems ... done. [ 6373.171677] PM: Preparing system for sleep (mem) [ 6373.172269] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6373.175110] OOM killer disabled. [ 6373.175111] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6373.176681] PM: Suspending system (mem) [ 6373.176762] Suspending console(s) (use no_console_suspend to debug) [ 6373.177227] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 6373.177238] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 6373.177245] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 6373.177251] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 6373.177258] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 6373.677247] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 6373.677314] PM: Some devices failed to suspend, or early wake event detected [ 6373.677443] PM: resume of devices complete after 0.124 msecs [ 6394.076733] acpi LNXPOWER:13: Turning OFF [ 6394.076907] acpi LNXPOWER:12: Turning OFF [ 6394.077073] acpi LNXPOWER:11: Turning OFF [ 6394.077239] acpi LNXPOWER:10: Turning OFF [ 6394.077402] acpi LNXPOWER:0f: Turning OFF [ 6394.077564] acpi LNXPOWER:0e: Turning OFF [ 6394.077724] acpi LNXPOWER:0d: Turning OFF [ 6394.077887] acpi LNXPOWER:0c: Turning OFF [ 6394.078048] acpi LNXPOWER:0b: Turning OFF [ 6394.078209] acpi LNXPOWER:0a: Turning OFF [ 6394.078371] acpi LNXPOWER:09: Turning OFF [ 6394.078533] acpi LNXPOWER:08: Turning OFF [ 6394.078693] acpi LNXPOWER:07: Turning OFF [ 6394.078871] acpi LNXPOWER:06: Turning OFF [ 6394.079039] acpi LNXPOWER:05: Turning OFF [ 6394.079201] acpi LNXPOWER:04: Turning OFF [ 6394.079361] acpi LNXPOWER:03: Turning OFF [ 6394.079522] acpi LNXPOWER:02: Turning OFF [ 6394.079683] acpi LNXPOWER:01: Turning OFF [ 6394.079844] acpi LNXPOWER:00: Turning OFF [ 6394.079949] PM: Finishing wakeup. [ 6394.079951] OOM killer enabled. [ 6394.079952] Restarting tasks ... done. [ 6394.143629] PM: Syncing filesystems ... done. [ 6394.146813] PM: Preparing system for sleep (freeze) [ 6394.147063] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6394.148866] OOM killer disabled. [ 6394.148866] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6394.150119] PM: Suspending system (freeze) [ 6394.150120] Suspending console(s) (use no_console_suspend to debug) [ 6394.150309] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 6394.150314] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 6394.150316] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 6394.150319] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 6394.150321] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 6394.650310] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 6394.650379] PM: Some devices failed to suspend, or early wake event detected [ 6394.650479] PM: resume of devices complete after 0.096 msecs [ 6415.068595] PM: Finishing wakeup. [ 6415.068596] OOM killer enabled. [ 6415.068597] Restarting tasks ... done. [ 6415.134010] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6415.893257] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6416.743067] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6416.811955] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6421.431947] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 6421.463057] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 6421.508109] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 6421.509034] wlp58s0: authenticated [ 6421.510997] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 6421.512618] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 6421.516117] wlp58s0: associated [ 6421.516268] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 6421.526407] ath: EEPROM regdomain: 0x8348 [ 6421.526411] ath: EEPROM indicates we should expect a country code [ 6421.526414] ath: doing EEPROM country->regdmn map search [ 6421.526417] ath: country maps to regdmn code: 0x3a [ 6421.526420] ath: Country alpha2 being used: US [ 6421.526421] ath: Regpair used: 0x3a [ 6421.526424] ath: regdomain 0x8348 dynamically updated by country IE [ 6421.546515] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 7315.397647] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 7315.410996] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7315.966816] PM: Syncing filesystems ... done. [ 7315.972115] PM: Preparing system for sleep (mem) [ 7315.972838] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 7315.975907] OOM killer disabled. [ 7315.975908] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7315.977478] PM: Suspending system (mem) [ 7315.977558] Suspending console(s) (use no_console_suspend to debug) [ 7315.977993] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 7315.978005] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 7315.978012] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 7315.978018] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 7315.978021] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 7316.478031] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 7316.478105] PM: Some devices failed to suspend, or early wake event detected [ 7316.478233] PM: resume of devices complete after 0.122 msecs [ 7336.926403] acpi LNXPOWER:13: Turning OFF [ 7336.926598] acpi LNXPOWER:12: Turning OFF [ 7336.926784] acpi LNXPOWER:11: Turning OFF [ 7336.926967] acpi LNXPOWER:10: Turning OFF [ 7336.927147] acpi LNXPOWER:0f: Turning OFF [ 7336.927327] acpi LNXPOWER:0e: Turning OFF [ 7336.927507] acpi LNXPOWER:0d: Turning OFF [ 7336.927690] acpi LNXPOWER:0c: Turning OFF [ 7336.927872] acpi LNXPOWER:0b: Turning OFF [ 7336.928053] acpi LNXPOWER:0a: Turning OFF [ 7336.928235] acpi LNXPOWER:09: Turning OFF [ 7336.928434] acpi LNXPOWER:08: Turning OFF [ 7336.928622] acpi LNXPOWER:07: Turning OFF [ 7336.928801] acpi LNXPOWER:06: Turning OFF [ 7336.928982] acpi LNXPOWER:05: Turning OFF [ 7336.929162] acpi LNXPOWER:04: Turning OFF [ 7336.929342] acpi LNXPOWER:03: Turning OFF [ 7336.929523] acpi LNXPOWER:02: Turning OFF [ 7336.929704] acpi LNXPOWER:01: Turning OFF [ 7336.929892] acpi LNXPOWER:00: Turning OFF [ 7336.929997] PM: Finishing wakeup. [ 7336.929999] OOM killer enabled. [ 7336.930000] Restarting tasks ... done. [ 7337.003462] PM: Syncing filesystems ... done. [ 7337.006823] PM: Preparing system for sleep (freeze) [ 7337.007035] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7337.008626] OOM killer disabled. [ 7337.008627] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7337.009938] PM: Suspending system (freeze) [ 7337.009939] Suspending console(s) (use no_console_suspend to debug) [ 7337.010199] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 7337.010204] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 7337.010206] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 7337.010208] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 7337.010212] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 7337.510189] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 7337.510255] PM: Some devices failed to suspend, or early wake event detected [ 7337.510312] i2c i2c-7: Unbalanced pm_runtime_enable! [ 7337.510364] PM: resume of devices complete after 0.106 msecs [ 7357.918164] PM: Finishing wakeup. [ 7357.918165] OOM killer enabled. [ 7357.918166] Restarting tasks ... done. [ 7357.981798] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7358.739418] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7359.586108] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7359.662098] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7364.294582] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7364.318529] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 7364.363635] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 7364.364548] wlp58s0: authenticated [ 7364.368605] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 7364.370309] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 7364.373445] wlp58s0: associated [ 7364.373504] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 7364.377565] ath: EEPROM regdomain: 0x8348 [ 7364.377567] ath: EEPROM indicates we should expect a country code [ 7364.377568] ath: doing EEPROM country->regdmn map search [ 7364.377569] ath: country maps to regdmn code: 0x3a [ 7364.377570] ath: Country alpha2 being used: US [ 7364.377571] ath: Regpair used: 0x3a [ 7364.377573] ath: regdomain 0x8348 dynamically updated by country IE [ 7364.411792] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 8258.261342] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 8258.272096] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 8258.817387] PM: Syncing filesystems ... done. [ 8258.822378] PM: Preparing system for sleep (mem) [ 8258.822822] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8258.824701] OOM killer disabled. [ 8258.824701] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8258.826088] PM: Suspending system (mem) [ 8258.826139] Suspending console(s) (use no_console_suspend to debug) [ 8258.826456] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 8258.826463] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 8258.826466] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 8258.826469] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 8258.826471] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 8259.326489] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 8259.326513] PM: Some devices failed to suspend, or early wake event detected [ 8259.326621] i2c i2c-7: Unbalanced pm_runtime_enable! [ 8259.326683] PM: resume of devices complete after 0.165 msecs [ 8279.773931] acpi LNXPOWER:13: Turning OFF [ 8279.774107] acpi LNXPOWER:12: Turning OFF [ 8279.774274] acpi LNXPOWER:11: Turning OFF [ 8279.774440] acpi LNXPOWER:10: Turning OFF [ 8279.774602] acpi LNXPOWER:0f: Turning OFF [ 8279.774764] acpi LNXPOWER:0e: Turning OFF [ 8279.774926] acpi LNXPOWER:0d: Turning OFF [ 8279.775090] acpi LNXPOWER:0c: Turning OFF [ 8279.775253] acpi LNXPOWER:0b: Turning OFF [ 8279.775414] acpi LNXPOWER:0a: Turning OFF [ 8279.775578] acpi LNXPOWER:09: Turning OFF [ 8279.775740] acpi LNXPOWER:08: Turning OFF [ 8279.775902] acpi LNXPOWER:07: Turning OFF [ 8279.776063] acpi LNXPOWER:06: Turning OFF [ 8279.776227] acpi LNXPOWER:05: Turning OFF [ 8279.776389] acpi LNXPOWER:04: Turning OFF [ 8279.776574] acpi LNXPOWER:03: Turning OFF [ 8279.776737] acpi LNXPOWER:02: Turning OFF [ 8279.776899] acpi LNXPOWER:01: Turning OFF [ 8279.777061] acpi LNXPOWER:00: Turning OFF [ 8279.777166] PM: Finishing wakeup. [ 8279.777167] OOM killer enabled. [ 8279.777168] Restarting tasks ... done. [ 8279.847820] PM: Syncing filesystems ... done. [ 8279.851875] PM: Preparing system for sleep (freeze) [ 8279.852068] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8279.853960] OOM killer disabled. [ 8279.853961] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8279.855220] PM: Suspending system (freeze) [ 8279.855221] Suspending console(s) (use no_console_suspend to debug) [ 8279.855461] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 8279.855466] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 8279.855469] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 8279.855471] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 8279.855472] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 8279.855481] PM: Some devices failed to suspend, or early wake event detected [ 8279.855541] PM: resume of devices complete after 0.058 msecs [ 8300.253610] PM: Finishing wakeup. [ 8300.253612] OOM killer enabled. [ 8300.253613] Restarting tasks ... done. [ 8300.320838] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 8301.081468] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 8301.937029] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 8302.018118] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 8306.636499] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 8306.683414] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 8306.728282] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 8306.729154] wlp58s0: authenticated [ 8306.732574] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 8306.734361] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=3) [ 8306.737582] wlp58s0: associated [ 8306.737729] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 8306.747188] ath: EEPROM regdomain: 0x8348 [ 8306.747192] ath: EEPROM indicates we should expect a country code [ 8306.747195] ath: doing EEPROM country->regdmn map search [ 8306.747198] ath: country maps to regdmn code: 0x3a [ 8306.747201] ath: Country alpha2 being used: US [ 8306.747203] ath: Regpair used: 0x3a [ 8306.747206] ath: regdomain 0x8348 dynamically updated by country IE [ 8306.858602] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 8460.037329] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8 [ 8460.037358] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID) [ 8460.037369] pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00001000/00002000 [ 8460.037375] pcieport 0000:00:1d.0: [12] Replay Timer Timeout [ 9008.349849] wlp58s0: disconnect from AP 64:a0:e7:ff:45:cf for new auth to 64:a0:e7:ff:45:c0 [ 9008.354425] wlp58s0: authenticate with 64:a0:e7:ff:45:c0 [ 9008.422435] wlp58s0: send auth to 64:a0:e7:ff:45:c0 (try 1/3) [ 9008.423825] wlp58s0: authenticated [ 9008.433429] wlp58s0: associate with 64:a0:e7:ff:45:c0 (try 1/3) [ 9008.435756] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:c0 (capab=0x421 status=0 aid=1) [ 9008.438757] wlp58s0: associated [ 9008.465215] ath: EEPROM regdomain: 0x8348 [ 9008.465217] ath: EEPROM indicates we should expect a country code [ 9008.465218] ath: doing EEPROM country->regdmn map search [ 9008.465219] ath: country maps to regdmn code: 0x3a [ 9008.465220] ath: Country alpha2 being used: US [ 9008.465221] ath: Regpair used: 0x3a [ 9008.465222] ath: regdomain 0x8348 dynamically updated by country IE [ 9008.495236] wlp58s0: Limiting TX power to 17 dBm as advertised by 64:a0:e7:ff:45:c0 [ 9085.001300] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 9085.045660] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 9085.046427] wlp58s0: authenticated [ 9085.046978] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 9085.048474] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=16) [ 9085.051686] wlp58s0: associated [ 9085.054461] ath: EEPROM regdomain: 0x8348 [ 9085.054462] ath: EEPROM indicates we should expect a country code [ 9085.054463] ath: doing EEPROM country->regdmn map search [ 9085.054463] ath: country maps to regdmn code: 0x3a [ 9085.054464] ath: Country alpha2 being used: US [ 9085.054464] ath: Regpair used: 0x3a [ 9085.054465] ath: regdomain 0x8348 dynamically updated by country IE [ 9085.111556] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf [ 9200.600353] wlp58s0: deauthenticating from 64:a0:e7:ff:45:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 9200.622152] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9201.184296] PM: Syncing filesystems ... done. [ 9201.190025] PM: Preparing system for sleep (mem) [ 9201.190685] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 9201.194060] OOM killer disabled. [ 9201.194062] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9201.195683] PM: Suspending system (mem) [ 9201.195771] Suspending console(s) (use no_console_suspend to debug) [ 9201.196322] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 9201.196335] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 9201.196343] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 9201.196348] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 9201.196353] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 9201.696302] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 9201.696337] PM: Some devices failed to suspend, or early wake event detected [ 9201.696463] i2c i2c-7: Unbalanced pm_runtime_enable! [ 9201.696527] PM: resume of devices complete after 0.186 msecs [ 9222.108704] acpi LNXPOWER:13: Turning OFF [ 9222.108862] acpi LNXPOWER:12: Turning OFF [ 9222.109014] acpi LNXPOWER:11: Turning OFF [ 9222.109164] acpi LNXPOWER:10: Turning OFF [ 9222.109312] acpi LNXPOWER:0f: Turning OFF [ 9222.109459] acpi LNXPOWER:0e: Turning OFF [ 9222.109605] acpi LNXPOWER:0d: Turning OFF [ 9222.109754] acpi LNXPOWER:0c: Turning OFF [ 9222.109902] acpi LNXPOWER:0b: Turning OFF [ 9222.110048] acpi LNXPOWER:0a: Turning OFF [ 9222.110196] acpi LNXPOWER:09: Turning OFF [ 9222.110343] acpi LNXPOWER:08: Turning OFF [ 9222.110490] acpi LNXPOWER:07: Turning OFF [ 9222.110636] acpi LNXPOWER:06: Turning OFF [ 9222.110785] acpi LNXPOWER:05: Turning OFF [ 9222.110962] acpi LNXPOWER:04: Turning OFF [ 9222.111109] acpi LNXPOWER:03: Turning OFF [ 9222.111257] acpi LNXPOWER:02: Turning OFF [ 9222.111405] acpi LNXPOWER:01: Turning OFF [ 9222.111552] acpi LNXPOWER:00: Turning OFF [ 9222.111648] PM: Finishing wakeup. [ 9222.111649] OOM killer enabled. [ 9222.111650] Restarting tasks ... done. [ 9222.176192] PM: Syncing filesystems ... done. [ 9222.179754] PM: Preparing system for sleep (freeze) [ 9222.179966] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9222.181904] OOM killer disabled. [ 9222.181904] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9222.183035] PM: Suspending system (freeze) [ 9222.183036] Suspending console(s) (use no_console_suspend to debug) [ 9222.183265] xhci_hcd 0000:39:00.0: WARN: xHC CMD_RUN timeout [ 9222.183269] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 9222.183272] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 9222.183274] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 9222.183276] PM: Device 0000:39:00.0 failed to suspend async: error -110 [ 9222.683287] thunderbolt 0000:03:00.0: Ignoring mailbox command error (-110) in icm_suspend [ 9222.683351] PM: Some devices failed to suspend, or early wake event detected [ 9222.683459] i2c i2c-7: Unbalanced pm_runtime_enable! [ 9222.683515] PM: resume of devices complete after 0.159 msecs [ 9243.100572] PM: Finishing wakeup. [ 9243.100574] OOM killer enabled. [ 9243.100575] Restarting tasks ... done. [ 9243.161053] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9243.916729] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9244.766667] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9244.844844] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9249.468398] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9249.521566] wlp58s0: authenticate with 64:a0:e7:ff:45:cf [ 9249.566620] wlp58s0: send auth to 64:a0:e7:ff:45:cf (try 1/3) [ 9249.567497] wlp58s0: authenticated [ 9249.570935] wlp58s0: associate with 64:a0:e7:ff:45:cf (try 1/3) [ 9249.572601] wlp58s0: RX AssocResp from 64:a0:e7:ff:45:cf (capab=0x101 status=0 aid=16) [ 9249.575994] wlp58s0: associated [ 9249.576120] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 9249.583384] ath: EEPROM regdomain: 0x8348 [ 9249.583387] ath: EEPROM indicates we should expect a country code [ 9249.583389] ath: doing EEPROM country->regdmn map search [ 9249.583392] ath: country maps to regdmn code: 0x3a [ 9249.583394] ath: Country alpha2 being used: US [ 9249.583395] ath: Regpair used: 0x3a [ 9249.583398] ath: regdomain 0x8348 dynamically updated by country IE [ 9249.619156] wlp58s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 64:a0:e7:ff:45:cf
Also, I was sitting next to my laptop and the screen was black. It all of a sudden without me hitting anything turned on and showed me the login screen.... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1715146 Title: Not Suspending When Lid is Closed Causing Heat Issue Status in linux package in Ubuntu: Incomplete Bug description: I installed Ubuntu Budgie 17.04 64-bit. I installed the operating system and then when booted, I apt-get update and apt-get upgrade. I went to the coffee shop and used the system for a while. When I came home I left my laptop Dell XPS 9360 in its leather case and inside my laptop bag. I left to do some errands and came back to a really hot laptop and case. The system had not gone to sleep when I closed the lid and the computer was very hot. I have attached a copy of the log files. I then: sudo vi /etc/systemd/logind.conf Changed: HandleLidSwitchDocked=suspend when I close the lid now it gives me a password to login when I open the lid, but I am not sure if it is sleeping properly. Please assist, as I do not want my laptop battery damaged by this heat again. --- ApportVersion: 2.20.4-0ubuntu4.5 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: shawn 1786 F.... pulseaudio DistroRelease: Ubuntu 17.04 InstallationDate: Installed on 2017-09-04 (1 days ago) InstallationMedia: Ubuntu-Budgie 17.04 "Zesty Zapus" - Release amd64 (20170412) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0c45:670c Microdia Bus 001 Device 002: ID 0cf3:e301 Atheros Communications, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9360 Package: linux (not installed) ProcEnviron: LANGUAGE=en_US TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic.efi.signed root=UUID=5a8531ee-d89d-43d9-b3d9-f720bd123822 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37-generic 4.10.17 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.164.1 Tags: zesty Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 08/02/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 2.1.0 dmi.board.name: 05JK94 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr2.1.0:bd08/02/2017:svnDellInc.:pnXPS139360:pvr:rvnDellInc.:rn05JK94:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 13 9360 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1715146/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
