This bug was fixed in the package linux - 4.15.0-23.25
---------------
linux (4.15.0-23.25) bionic; urgency=medium
* linux: 4.15.0-23.25 -proposed tracker (LP: #1772927)
* arm64 SDEI support needs trampoline code for KPTI (LP: #1768630)
- arm64: mmu: add the entry trampolines start/end section markers into
sections.h
- arm64: sdei: Add trampoline code for remapping the kernel
* Some PCIe errors not surfaced through rasdaemon (LP: #1769730)
- ACPI: APEI: handle PCIe AER errors in separate function
- ACPI: APEI: call into AER handling regardless of severity
* qla2xxx: Fix page fault at kmem_cache_alloc_node() (LP: #1770003)
- scsi: qla2xxx: Fix session cleanup for N2N
- scsi: qla2xxx: Remove unused argument from
qlt_schedule_sess_for_deletion()
- scsi: qla2xxx: Serialize session deletion by using work_lock
- scsi: qla2xxx: Serialize session free in qlt_free_session_done
- scsi: qla2xxx: Don't call dma_free_coherent with IRQ disabled.
- scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
- scsi: qla2xxx: Prevent relogin trigger from sending too many commands
- scsi: qla2xxx: Fix double free bug after firmware timeout
- scsi: qla2xxx: Fixup locking for session deletion
* Several hisi_sas bug fixes (LP: #1768974)
- scsi: hisi_sas: dt-bindings: add an property of signal attenuation
- scsi: hisi_sas: support the property of signal attenuation for v2 hw
- scsi: hisi_sas: fix the issue of link rate inconsistency
- scsi: hisi_sas: fix the issue of setting linkrate register
- scsi: hisi_sas: increase timer expire of internal abort task
- scsi: hisi_sas: remove unused variable hisi_sas_devices.running_req
- scsi: hisi_sas: fix return value of hisi_sas_task_prep()
- scsi: hisi_sas: Code cleanup and minor bug fixes
* [bionic] machine stuck and bonding not working well when nvmet_rdma module
is loaded (LP: #1764982)
- nvmet-rdma: Don't flush system_wq by default during remove_one
- nvme-rdma: Don't flush delete_wq by default during remove_one
* Warnings/hang during error handling of SATA disks on SAS controller
(LP: #1768971)
- scsi: libsas: defer ata device eh commands to libata
* Hotplugging a SATA disk into a SAS controller may cause crash (LP: #1768948)
- ata: do not schedule hot plug if it is a sas host
* ISST-LTE:pKVM:Ubuntu1804: rcu_sched self-detected stall on CPU follow by CPU
ATTEMPT TO RE-ENTER FIRMWARE! (LP: #1767927)
- powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()
- powerpc/64s: return more carefully from sreset NMI
- powerpc/64s: sreset panic if there is no debugger or crash dump handlers
* fsnotify: Fix fsnotify_mark_connector race (LP: #1765564)
- fsnotify: Fix fsnotify_mark_connector race
* Hang on network interface removal in Xen virtual machine (LP: #1771620)
- xen-netfront: Fix hang on device removal
* HiSilicon HNS NIC names are truncated in /proc/interrupts (LP: #1765977)
- net: hns: Avoid action name truncation
* Ubuntu 18.04 kernel crashed while in degraded mode (LP: #1770849)
- SAUCE: powerpc/perf: Fix memory allocation for core-imc based on
num_possible_cpus()
* Switch Build-Depends: transfig to fig2dev (LP: #1770770)
- [Config] update Build-Depends: transfig to fig2dev
* smp_call_function_single/many core hangs with stop4 alone (LP: #1768898)
- cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer
interrupt
* Add d-i support for Huawei NICs (LP: #1767490)
- d-i: add hinic to nic-modules udeb
* unregister_netdevice: waiting for eth0 to become free. Usage count = 5
(LP: #1746474)
- xfrm: reuse uncached_list to track xdsts
* Include nfp driver in linux-modules (LP: #1768526)
- [Config] Add nfp.ko to generic inclusion list
* Kernel panic on boot (m1.small in cn-north-1) (LP: #1771679)
- x86/xen: Reset VCPU0 info pointer after shared_info remap
* CVE-2018-3639 (x86)
- x86/bugs: Fix the parameters alignment and missing void
- KVM: SVM: Move spec control call after restore of GS
- x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
- x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
- x86/cpufeatures: Disentangle SSBD enumeration
- x86/cpufeatures: Add FEATURE_ZEN
- x86/speculation: Handle HT correctly on AMD
- x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
- x86/speculation: Add virtualized speculative store bypass disable support
- x86/speculation: Rework speculative_store_bypass_update()
- x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
- x86/bugs: Expose x86_spec_ctrl_base directly
- x86/bugs: Remove x86_spec_ctrl_set()
- x86/bugs: Rework spec_ctrl base and mask logic
- x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
- KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
- x86/bugs: Rename SSBD_NO to SSB_NO
- bpf: Prevent memory disambiguation attack
- KVM: VMX: Expose SSBD properly to guests.
* Suspend to idle: Open lid didn't resume (LP: #1771542)
- ACPI / PM: Do not reconfigure GPEs for suspend-to-idle
* Fix initialization failure detection in SDEI for device-tree based systems
(LP: #1768663)
- firmware: arm_sdei: Fix return value check in sdei_present_dt()
* No driver for Huawei network adapters on arm64 (LP: #1769899)
- net-next/hinic: add arm64 support
* CVE-2018-1092
- ext4: fail ext4_iget for root directory if unallocated
* kernel 4.15 breaks nouveau on Lenovo P50 (LP: #1763189)
- drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
* update-initramfs not adding i915 GuC firmware for Kaby Lake, firmware fails
to load (LP: #1728238)
- Revert "UBUNTU: SAUCE: (no-up) i915: Remove MODULE_FIRMWARE statements for
unreleased firmware"
* Battery drains when laptop is off (shutdown) (LP: #1745646)
- PCI / PM: Check device_may_wakeup() in pci_enable_wake()
* Dell Latitude 5490/5590 BIOS update 1.1.9 causes black screen at boot
(LP: #1764194)
- drm/i915/bios: filter out invalid DDC pins from VBT child devices
* Intel 9462 A370:42A4 doesn't work (LP: #1748853)
- iwlwifi: add shared clock PHY config flag for some devices
- iwlwifi: add a bunch of new 9000 PCI IDs
* Fix an issue that some PCI devices get incorrectly suspended (LP: #1764684)
- PCI / PM: Always check PME wakeup capability for runtime wakeup support
* [SRU][Bionic/Artful] fix false positives in W+X checking (LP: #1769696)
- init: fix false positives in W+X checking
* Bionic update to v4.15.18 stable release (LP: #1769723)
- netfilter: ipset: Missing nfnl_lock()/nfnl_unlock() is added to
ip_set_net_exit()
- cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
- rds: MP-RDS may use an invalid c_path
- slip: Check if rstate is initialized before uncompressing
- vhost: fix vhost_vq_access_ok() log check
- l2tp: fix races in tunnel creation
- l2tp: fix race in duplicate tunnel detection
- ip_gre: clear feature flags when incompatible o_flags are set
- vhost: Fix vhost_copy_to_user()
- lan78xx: Correctly indicate invalid OTP
- media: v4l2-compat-ioctl32: don't oops on overlay
- media: v4l: vsp1: Fix header display list status check in continuous mode
- ipmi: Fix some error cleanup issues
- parisc: Fix out of array access in match_pci_device()
- parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
- Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
- PCI: hv: Serialize the present and eject work items
- PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
- KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode
- perf/core: Fix use-after-free in uprobe_perf_close()
- x86/mce/AMD: Get address from already initialized block
- hwmon: (ina2xx) Fix access to uninitialized mutex
- ath9k: Protect queue draining by rcu_read_lock()
- x86/apic: Fix signedness bug in APIC ID validity checks
- f2fs: fix heap mode to reset it back
- block: Change a rcu_read_{lock,unlock}_sched() pair into
rcu_read_{lock,unlock}()
- nvme: Skip checking heads without namespaces
- lib: fix stall in __bitmap_parselist()
- blk-mq: order getting budget and driver tag
- blk-mq: don't keep offline CPUs mapped to hctx 0
- ovl: fix lookup with middle layer opaque dir and absolute path redirects
- xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
- hugetlbfs: fix bug in pgoff overflow checking
- nfsd: fix incorrect umasks
- scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
- block/loop: fix deadlock after loop_set_status
- nfit: fix region registration vs block-data-window ranges
- s390/qdio: don't retry EQBS after CCQ 96
- s390/qdio: don't merge ERROR output buffers
- s390/ipl: ensure loadparm valid flag is set
- get_user_pages_fast(): return -EFAULT on access_ok failure
- mm/gup_benchmark: handle gup failures
- getname_kernel() needs to make sure that ->name != ->iname in long case
- Bluetooth: Fix connection if directed advertising and privacy is used
- Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-
low
- rtl8187: Fix NULL pointer dereference in priv->conf_mutex
- ovl: set lower layer st_dev only if setting lower st_ino
- Linux 4.15.18
* Kernel bug when unplugging Thunderbolt 3 cable, leaves xHCI host controller
dead (LP: #1768852)
- xhci: Fix Kernel oops in xhci dbgtty
* Incorrect blacklist of bcm2835_wdt (LP: #1766052)
- [Packaging] Fix missing watchdog for Raspberry Pi
* CVE-2018-8087
- mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
* Integrated Webcam Realtek Integrated_Webcam_HD (0bda:58f4) not working in
DELL XPS 13 9370 with firmware 1.50 (LP: #1763748)
- SAUCE: media: uvcvideo: Support realtek's UVC 1.5 device
* [ALSA] [PATCH] Clevo P950ER ALC1220 Fixup (LP: #1769721)
- SAUCE: ALSA: hda/realtek - Clevo P950ER ALC1220 Fixup
* Bionic: Intermittently sent to Emergency Mode on boot with unhandled kernel
NULL pointer dereference at 0000000000000980 (LP: #1768292)
- thunderbolt: Prevent crash when ICM firmware is not running
* linux-snapdragon: reduce EPROBEDEFER noise during boot (LP: #1768761)
- [Config] snapdragon: DRM_I2C_ADV7511=y
* regression Aquantia Corp. AQC107 4.15.0-13-generic -> 4.15.0-20-generic ?
(LP: #1767088)
- net: aquantia: Regression on reset with 1.x firmware
- net: aquantia: oops when shutdown on already stopped device
* e1000e msix interrupts broken in linux-image-4.15.0-15-generic
(LP: #1764892)
- e1000e: Remove Other from EIAC
* Acer Swift sf314-52 power button not managed (LP: #1766054)
- SAUCE: platform/x86: acer-wmi: add another KEY_POWER keycode
* set PINCFG_HEADSET_MIC to parse_flags for Dell precision 3630 (LP: #1766398)
- ALSA: hda/realtek - set PINCFG_HEADSET_MIC to parse_flags
* Change the location for one of two front mics on a lenovo thinkcentre
machine (LP: #1766477)
- ALSA: hda/realtek - adjust the location of one mic
* SRU: bionic: apply 50 ZFS upstream bugfixes (LP: #1764690)
- SAUCE: (noup) Update zfs to 0.7.5-1ubuntu15 (LP: #1764690)
* [8086:3e92] display becomes blank after S3 (LP: #1763271)
- drm/i915/edp: Do not do link training fallback or prune modes on EDP
-- Stefan Bader <stefan.ba...@canonical.com> Wed, 23 May 2018 18:54:55
+0200
** Changed in: linux (Ubuntu Bionic)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-1092
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-3639
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-8087
** Changed in: linux (Ubuntu Bionic)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1728238
Title:
update-initramfs not adding i915 GuC firmware for Kaby Lake, firmware
fails to load
Status in initramfs-tools:
New
Status in linux package in Ubuntu:
In Progress
Status in linux source package in Bionic:
Fix Released
Bug description:
== SRU Justification ==
This firmware was optional when the MODULE_FIRMWARE statements were
removed in bug 1626740 by Bionic commit dc0f16f9b50. The firmware is now
available and in use, so these statements need to be added back.
Without these statements, The i915 Kabylake GuC firmware is failing to load
on boot, and generating dmesg errors.
== Fix ==
Revert Bionic commit dc0f16f9b5084e6be2b8c79f8c6cd499a3451791.
== Regression Potential ==
Low. Adding a statement back that was removed by a SAUCE patch.
== Test Case ==
A test kernel was built with this patch and tested by the original bug
reporter.
The bug reporter states the test kernel resolved the bug.
== Original Bug Report ==
The i915 Kabylake GuC firmware is failing to load on boot, and generating
dmesg errors. The Kabylake HuC firmware succeeds. All files exist. I've also
verified the Kabylake GuC firmware matches the correct file size and md5 listed
on 01.org.
I then ran update-initramfs verbosely, and see that only
/lib/firmware/i915/skl_guc_ver6_1.bin is being added.
/lib/firmware/i915/bxt_guc_ver8_7.bin and
/lib/firmware/i915/kbl_guc_ver9_14.bin seem to be ignored.
I'm running a Dell XPS 13 9360 w/ Kabylake on Ubuntu 17.10 and
initramfs-tools 0.125ubuntu12. Perhaps Broxton systems might have the
same issue?
Output and logs:
-----------------
ls -al /lib/firmware/i915/kbl_*
-rw-r--r-- 1 root root 8616 Aug 17 11:08
/lib/firmware/i915/kbl_dmc_ver1_01.bin
lrwxrwxrwx 1 root root 19 Aug 17 11:08
/lib/firmware/i915/kbl_dmc_ver1.bin -> kbl_dmc_ver1_01.bin
-rw-r--r-- 1 root root 142656 Oct 20 21:12
/lib/firmware/i915/kbl_guc_ver9_14.bin
-rw-r--r-- 1 root root 218688 Aug 17 11:09
/lib/firmware/i915/kbl_huc_ver02_00_1810.bin
sudo cat /sys/kernel/debug/dri/0/i915_guc_load_status
GuC firmware status:
path: i915/kbl_guc_ver9_14.bin
fetch: FAIL
load: NONE
version wanted: 9.14
version found: 0.0
header: offset is 0; size = 0
uCode: offset is 0; size = 0
RSA: offset is 0; size = 0
GuC status 0x00000001:
Bootrom status = 0x0
uKernel status = 0x0
MIA Core status = 0x0
Scratch registers:
0: 0x0
1: 0x0
2: 0x0
3: 0x0
4: 0x0
5: 0x0
6: 0x0
7: 0x0
8: 0x0
9: 0x0
10: 0x0
11: 0x0
12: 0x0
13: 0x0
14: 0x0
15: 0x0
sudo cat /sys/kernel/debug/dri/0/i915_huc_load_status
HuC firmware status:
path: i915/kbl_huc_ver02_00_1810.bin
fetch: SUCCESS
load: SUCCESS
version wanted: 2.0
version found: 2.0
header: offset is 0; size = 128
uCode: offset is 128; size = 218304
RSA: offset is 218432; size = 256
HuC status 0x00006000:
dmesg
[ 1.052879] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.056426] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control
method not found
[ 1.080320] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[ 1.082308] nvme nvme0: pci function 0000:3c:00.0
[ 1.095073] Setting dangerous option enable_guc_loading - tainting kernel
[ 1.095075] Setting dangerous option enable_guc_submission - tainting
kernel
[ 1.097867] [drm] Memory usable by graphics device = 4078M
[ 1.097869] checking generic (90000000 1fb0000) vs hw (90000000 10000000)
[ 1.097869] fb: switching to inteldrmfb from EFI VGA
[ 1.097899] Console: switching to colour dummy device 80x25
[ 1.098049] [drm] Replacing VGA console driver
[ 1.104157] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.104157] [drm] Driver supports precise vblank timestamp query.
[ 1.112506] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin
(v1.1)
[ 1.113055] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.284194] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.298572] nvme0n1: p1 p2
[ 1.433241] usb 1-1: New USB device found, idVendor=0d62, idProduct=001c
[ 1.433242] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.433243] usb 1-1: Product: USB+PS2 Keyboard
[ 1.433244] usb 1-1: Manufacturer: Generic
[ 1.446460] usbcore: registered new interface driver usbhid
[ 1.446461] usbhid: USB HID core driver
[ 1.448067] input: Generic USB+PS2 Keyboard as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0D62:001C.0001/input/input7
[ 1.508451] hid-generic 0003:0D62:001C.0001: input,hidraw0: USB HID v1.10
Keyboard [Generic USB+PS2 Keyboard] on usb-0000:00:14.0-1/input0
[ 1.508541] input: Generic USB+PS2 Keyboard as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0D62:001C.0002/input/input8
[ 1.552213] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 1.568448] hid-generic 0003:0D62:001C.0002: input,hidraw1: USB HID v1.10
Device [Generic USB+PS2 Keyboard] on usb-0000:00:14.0-1/input1
[ 1.695655] usb 1-2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.695656] usb 1-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.695657] usb 1-2: Product: USB Receiver
[ 1.695658] usb 1-2: Manufacturer: Logitech
[ 1.702641] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[ 1.820317] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[ 1.835948] input: Logitech M510 as
/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0005/0003:046D:4051.0006/input/input9
[ 1.836129] logitech-hidpp-device 0003:046D:4051.0006: input,hidraw3: USB
HID v1.11 Mouse [Logitech M510] on usb-0000:00:14.0-2:1
[ 1.838085] input: Logitech K750 as
/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0005/0003:046D:4002.0007/input/input10
[ 1.838283] logitech-hidpp-device 0003:046D:4002.0007: input,hidraw4: USB
HID v1.11 Keyboard [Logitech K750] on usb-0000:00:14.0-2:2
[ 1.896270] psmouse serio1: synaptics: queried max coordinates: x
[..5666], y [..4734]
[ 1.927267] psmouse serio1: synaptics: queried min coordinates: x
[1276..], y [1118..]
[ 1.927271] psmouse serio1: synaptics: Your touchpad (PNP: DLL075b
PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not
used, you might want to try setting psmouse.synaptics_intertouch to 1 and
report this to linux-in...@vger.kernel.org.
[ 1.938732] i915 0000:00:02.0: Direct firmware load for
i915/kbl_guc_ver9_14.bin failed with error -2
[ 1.938733] [drm] Failed to fetch valid uC firmware from
i915/kbl_guc_ver9_14.bin (error -2)
[ 1.944000] [drm:intel_uc_init_hw [i915]] *ERROR* GuC init failed
[ 1.944027] [drm] Falling back from GuC submission to execlist mode
[ 1.944027] [drm] GuC firmware loading disabled
[ 1.944746] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on
minor 0
[ 1.948280] clocksource: Switched to clocksource tsc
[ 1.955378] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.956112] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 1.961603] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e301
[ 1.961604] usb 1-3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
sudo update-initramfs -u -v -k all
Adding firmware /lib/firmware/nvidia/gp10b/gr/gpccs_data.bin
Adding firmware /lib/firmware/nvidia/gp10b/gr/gpccs_inst.bin
Adding firmware /lib/firmware/nvidia/gp10b/gr/gpccs_bl.bin
Adding firmware /lib/firmware/nvidia/gp10b/gr/fecs_sig.bin
Adding firmware /lib/firmware/nvidia/gp10b/gr/fecs_data.bin
Adding firmware /lib/firmware/nvidia/gp10b/gr/fecs_inst.bin
Adding firmware /lib/firmware/nvidia/gp10b/gr/fecs_bl.bin
Adding firmware /lib/firmware/nvidia/gp10b/acr/ucode_load.bin
Adding firmware /lib/firmware/nvidia/gp10b/acr/bl.bin
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/vgem/vgem.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/vmwgfx/vmwgfx.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/cirrus/cirrus.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/bridge/analogix-anx78xx.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/i915/i915.ko
Adding firmware /lib/firmware/i915/bxt_dmc_ver1_07.bin
Adding firmware /lib/firmware/i915/skl_dmc_ver1_26.bin
Adding firmware /lib/firmware/i915/kbl_dmc_ver1_01.bin
Adding firmware /lib/firmware/i915/skl_guc_ver6_1.bin
Adding firmware /lib/firmware/i915/kbl_huc_ver02_00_1810.bin
Adding firmware /lib/firmware/i915/bxt_huc_ver01_07_1398.bin
Adding firmware /lib/firmware/i915/skl_huc_ver01_07_1398.bin
Adding module /lib/modules/4.13.0-16-generic/kernel/virt/lib/irqbypass.ko
Adding module /lib/modules/4.13.0-16-generic/kernel/arch/x86/kvm/kvm.ko
Adding module /lib/modules/4.13.0-16-generic/kernel/drivers/vfio/vfio.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/vfio/vfio_iommu_type1.ko
Adding module /lib/modules/4.13.0-16-generic/kernel/drivers/vfio/mdev/mdev.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/vfio/mdev/vfio_mdev.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/i915/gvt/kvmgt.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/i2c/ch7006.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/i2c/sil164.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/i2c/tda998x.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/gma500/gma500_gfx.ko
Adding module /lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/udl/udl.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/hisilicon/hibmc/hibmc-drm.ko
Adding module
/lib/modules/4.13.0-16-generic/kernel/drivers/gpu/drm/radeon/radeon.ko
Adding firmware /lib/firmware/radeon/R520_cp.bin
Adding firmware /lib/firmware/radeon/RS600_cp.bin
Adding firmware /lib/firmware/radeon/RS690_cp.bin
Adding firmware /lib/firmware/radeon/R420_cp.bin
Adding firmware /lib/firmware/radeon/R300_cp.bin
Adding firmware /lib/firmware/radeon/R200_cp.bin
Adding firmware /lib/firmware/radeon/R100_cp.bin
Adding firmware /lib/firmware/radeon/SUMO2_me.bin
Adding firmware /lib/firmware/radeon/SUMO2_pfp.bin
Adding firmware /lib/firmware/radeon/SUMO_me.bin
To manage notifications about this bug go to:
https://bugs.launchpad.net/initramfs-tools/+bug/1728238/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
