Launchpad has imported 27 comments from the remote bug at https://bugzilla.kernel.org/show_bug.cgi?id=199779.
If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. ------------------------------------------------------------------------ On 2018-05-21T07:03:07+00:00 ryan wrote: Created attachment 276079 lspci -vv On HPe DL360 Gen9 (and possibly other gens and/or products; I haven't been able to test other HP hardware right now, but I do have several DL360 Gen9s I've confirmed on), upon shutdown/reboot, it will crash with: [ 122.447111] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 122.447112] {1}[Hardware Error]: event severity: fatal [ 122.447113] {1}[Hardware Error]: Error 0, type: fatal [ 122.447114] {1}[Hardware Error]: section_type: PCIe error [ 122.447115] {1}[Hardware Error]: port_type: 4, root port [ 122.447116] {1}[Hardware Error]: version: 1.16 [ 122.447118] {1}[Hardware Error]: command: 0x6010, status: 0x0143 [ 122.447119] {1}[Hardware Error]: device_id: 0000:00:01.0 [ 122.447119] {1}[Hardware Error]: slot: 0 [ 122.447120] {1}[Hardware Error]: secondary_bus: 0x03 [ 122.447120] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f02 [ 122.447121] {1}[Hardware Error]: class_code: 040600 [ 122.447122] {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 [ 122.447123] {1}[Hardware Error]: Error 1, type: fatal [ 122.447123] {1}[Hardware Error]: section_type: PCIe error [ 122.447124] {1}[Hardware Error]: port_type: 4, root port [ 122.447125] {1}[Hardware Error]: version: 1.16 [ 122.447125] {1}[Hardware Error]: command: 0x6010, status: 0x0143 [ 122.447126] {1}[Hardware Error]: device_id: 0000:00:01.0 [ 122.447127] {1}[Hardware Error]: slot: 0 [ 122.447127] {1}[Hardware Error]: secondary_bus: 0x03 [ 122.447128] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f02 [ 122.447129] {1}[Hardware Error]: class_code: 040600 [ 122.447130] {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 [ 122.447131] Kernel panic - not syncing: Fatal hardware error! [ 122.447166] Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 122.459295] ERST: [Firmware Warn]: Firmware does not respond in time. And after that, upon POST, the storage controller is not happy but does eventually work: Embedded RAID 1 : Smart Array P440ar Controller - (2048 MB, V6.30) 7 Logical Drive(s) - Operation Failed - 1719-Slot 0 Drive Array - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13) Action: Install the latest controller firmware. If the problem persists, replace the controller. Up to date firmware (P89 01/22/2018, controller 6.30). Interestingly, on older (circa 2016 but I don't have an exact version) firmware, this manifested as a crash loop: [529151.035267] NMI: IOCK error (debug interrupt?) for reason 75 on CPU 0. [529153.222883] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.222884] Do you have a strange power saving mode enabled? [529153.222884] Dazed and confused, but trying to continue [529153.554447] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.554448] Do you have a strange power saving mode enabled? [529153.554449] Dazed and confused, but trying to continue I've narrowed it down to https://patchwork.kernel.org/patch/10027157/ as part of commit 1b6115fbe3b3db746d7baa11399dd617fc75e1c4; removing that line prevents the panic. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/4 ------------------------------------------------------------------------ On 2018-05-21T11:11:51+00:00 okaya wrote: Can you test this patch? https://git.kernel.org/pub/scm/linux/kernel/git/next/linux- next.git/commit/drivers/pci/hotplug?id=d22b362184553899f7d6b6760899a77d3b2d7c1b There is a known Intel errata that we missed. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/5 ------------------------------------------------------------------------ On 2018-05-21T11:24:20+00:00 okaya wrote: can you also share your dmesg? Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/6 ------------------------------------------------------------------------ On 2018-05-21T19:31:17+00:00 ryan wrote: Created attachment 276103 4.17.0-rc5-next-20180517 dmesg Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/7 ------------------------------------------------------------------------ On 2018-05-21T19:32:26+00:00 ryan wrote: Thanks, but same problem with that patch against 4.15. Even tried next-20180517 to be sure, no luck. dmesg against next-20180517 has been attached. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/8 ------------------------------------------------------------------------ On 2018-05-21T19:38:19+00:00 okaya wrote: Cool, I had my suspicions. That's why, I asked for dmesg. Your system doesn't seem to have hotplug driver loaded. The bugfix above is valid only if you have hotplug driver enabled. Something else must be happening. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/9 ------------------------------------------------------------------------ On 2018-05-21T19:52:07+00:00 okaya wrote: it looks like PME is the only PCIe port service driver loaded. Can you empty out this line to see if it makes any difference? Then, we can start going deeper based on your test result. https://elixir.bootlin.com/linux/latest/ident/pcie_pme_remove Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/10 ------------------------------------------------------------------------ On 2018-05-21T21:05:30+00:00 ryan wrote: Created attachment 276111 pcie_pme_remove removed, crash Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/11 ------------------------------------------------------------------------ On 2018-05-21T21:06:16+00:00 ryan wrote: - .remove = pcie_pme_remove, With that removed, the crash becomes: [ 115.008578] kernel BUG at drivers/pci/msi.c:352! [ 115.069730] invalid opcode: 0000 [#1] SMP PTI [ 115.127399] CPU: 15 PID: 1 Comm: systemd-shutdow Not tainted 4.17.0-rc5-next-20180517-custom #1 [ 115.242735] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 01/22/2018 [ 115.351050] RIP: 0010:free_msi_irqs+0x17b/0x1b0 [ 115.410250] Code: 84 e1 fe ff ff 45 31 f6 eb 11 41 83 c6 01 44 39 73 14 0f 86 ce fe ff ff 8b 7b 10 44 01 f7 e8 7c f4 bb ff 48 83 78 70 00 74 e0 <0f> 0b 49 8d b5 a0 00 00 00 e8 b7 a0 bc ff e9 cf fe ff ff 48 8b 78 [...] Full output attached. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/12 ------------------------------------------------------------------------ On 2018-05-21T21:08:06+00:00 okaya wrote: Oops. can you comment out this line only? https://elixir.bootlin.com/linux/latest/source/drivers/pci/pcie/pme.c#L431 We have to call free_irq(). I went too aggressive at the problem. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/13 ------------------------------------------------------------------------ On 2018-05-21T21:30:49+00:00 ryan wrote: Commented out "pcie_pme_suspend(srv);", back to original Hardware Error crash. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/14 ------------------------------------------------------------------------ On 2018-05-21T21:34:55+00:00 okaya wrote: Weird. I'll come up with a debug patch. Can you collect some more data as to what other systems see this issue in the meantime? Since you are the first one to report the problem, there must be something unique about your setup. Also, please attach sudo lspci -t output too. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/15 ------------------------------------------------------------------------ On 2018-05-21T21:42:02+00:00 ryan wrote: Sure. I'm seeing this on a set of 4 DL360 Gen9s, I believe they were all purchased at the same time around 2016. I'll look around for further machines I can test on, looking for: 1) DL360 Gen9s but not from the same batch as these 2) Previous gens (not sure we have any older ones) 3) DL380 Gen9 Attaching lspci -t. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/16 ------------------------------------------------------------------------ On 2018-05-21T21:42:24+00:00 ryan wrote: Created attachment 276113 lspci -t Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/17 ------------------------------------------------------------------------ On 2018-05-21T22:03:33+00:00 okaya wrote: Created attachment 276115 debug_patch.patch Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/18 ------------------------------------------------------------------------ On 2018-05-22T01:24:49+00:00 ryan wrote: I was able to test on another DL360 Gen9 received about a year after the ones I discovered on, same problem. And a DL380 Gen9 with similar specs, also crashes. I was able to test on a DL380 Gen10, which did *not* crash. In summary: Bad: DL360 Gen9 - BIOS P89 v2.56 (01/22/2018) - P440ar V6.30 (originals) Bad: DL360 Gen9 - BIOS P89 v2.52 (10/25/2017) - P440ar V6.06 (newer) Bad: DL380 Gen9 - BIOS P89 v2.52 (10/25/2017) - P440ar V6.06 (newer) Good: DL380 Gen10 - U30 v1.32 (02/01/2018) - P408i-a 1.04-0 (even newer) Attached is the output from your debug patch on the original test system. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/19 ------------------------------------------------------------------------ On 2018-05-22T01:25:25+00:00 ryan wrote: Created attachment 276121 debug patch output Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/20 ------------------------------------------------------------------------ On 2018-05-22T01:43:38+00:00 okaya wrote: Many thanks, let's try these tests. Debug prints are not giving me any clues. The error seems to be asynchronous to the code execution. We'll have to find out by trial and error which one is confusing the HW. My bet is on the first one followed by the third. 1. comment out this line only. https://elixir.bootlin.com/linux/v4.17-rc6/source/drivers/pci/pcie/portdrv_core.c#L412 2. Comment out this line only. https://elixir.bootlin.com/linux/v4.17-rc6/source/drivers/pci/pcie/portdrv_pci.c#L148 3. Comment out the if block only. https://elixir.bootlin.com/linux/v4.17-rc6/source/drivers/pci/pcie/portdrv_pci.c#L142 Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/22 ------------------------------------------------------------------------ On 2018-05-22T02:24:18+00:00 ryan wrote: Progress! #1 reboots correctly. A) I had reverted out the debug print patch, want me to add it back? Does it give you any extra insight? B) Should I move on to #2 and #3? Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/23 ------------------------------------------------------------------------ On 2018-05-22T02:34:51+00:00 okaya wrote: No, this is enough. We now understand that disabling the bus master bit in the command-control register of the root port is causing a crash on your system. I suspect that the firmware is talking to the PCIe bus in parallel and by disabling the bus master bit, we are breaking the FW. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/24 ------------------------------------------------------------------------ On 2018-05-22T02:39:28+00:00 okaya wrote: Can you also attach the messages you are seeing during shutdown/reboot? The driver clean up order could be important too. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/25 ------------------------------------------------------------------------ On 2018-05-22T03:42:25+00:00 ryan wrote: Created attachment 276123 shutdown log [`dmesg -n debug` added, otherwise normal systemd-obfuscated user messages] This particular test machine is a MAAS server, 4 interfaces, 2 bonds, 2 bridges. It normally runs a KVM instance directly, but I don't have it set up to autoboot to save time while testing. Functionally, the other machines tested don't have a common operational trait: OpenStack "smoosh" (nova-compute + n-c-c + neutron + swift + ceph etc in LXDs), a straight Apache archive server, a standby firewall. Actually, they all appear to be at least partially utilizing 10gige interfaces (hopefully that's not a consideration since I'm not sure if I can pull a straight gigabit machine out of active use to test on short notice). Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/26 ------------------------------------------------------------------------ On 2018-05-22T03:56:49+00:00 okaya wrote: can you apply debug_patch.patch + 1. comment out this line only. https://elixir.bootlin.com/linux/v4.17-rc6/source/drivers/pci/pcie/portdrv_core.c#L412 and collect shutdown log one more time. I see quite a bit of driver shutdown activity from your network adapters. I want to see them in reference to the port service driver shutdown to see which one is happening first and last. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/27 ------------------------------------------------------------------------ On 2018-05-22T17:14:03+00:00 bhelgaas wrote: I am not yet convinced that it is necessary for pcie_port_device_remove() to call pci_disable_device() on PCIe Root Ports and Switch Ports during a reboot. A similar question came during discussion of pciehp timeouts during shutdown [1]. Eric Biederman had a good response [2] that I haven't had time to assimilate yet. [1] https://lkml.kernel.org/r/8770820b-85a0-172b-7230-3a44524e6...@molgen.mpg.de [2] https://lkml.kernel.org/r/87tvrrypkv....@xmission.com Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/28 ------------------------------------------------------------------------ On 2018-05-22T17:33:13+00:00 okaya wrote: I think the motivation is for rogue transactions from the devices not to hit the system memory while a new kernel is booted via kexec. It is not an issue when IOMMU is not present since the second kernel that is booting doesn't share the same address space. However; when IOMMU is present, an adapter can corrupt the newly booting kernel. So, you ideally want to have bus master bit cleared for a clean boot. What is interesting is that kexec is already doing this job in pci_device_shutdown(). This extra clear is unnecessary. I'll post a patch to remove it. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/29 ------------------------------------------------------------------------ On 2018-06-11T18:28:26+00:00 okaya wrote: change merged to the 4.18 kernel: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git/commit/?id=0d98ba8d70b0070ac117452ea0b663e26bbf46bf This issue can be closed. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/31 ------------------------------------------------------------------------ On 2018-06-19T18:20:40+00:00 ryan wrote: Ack, thank you for all your help. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771467/comments/34 ** Changed in: linux Status: Unknown => Fix Released ** Changed in: linux Importance: Unknown => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1771467 Title: Reboot/shutdown kernel panic on HP DL360/DL380 Gen9 w/ bionic 4.15.0 Status in Linux: Fix Released Status in linux package in Ubuntu: In Progress Status in linux source package in Bionic: In Progress Bug description: Verified on multiple DL360 Gen9 servers with up to date firmware. Just before reboot or shutdown, there is the following panic: [ 289.093083] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 289.093085] {1}[Hardware Error]: event severity: fatal [ 289.093087] {1}[Hardware Error]: Error 0, type: fatal [ 289.093088] {1}[Hardware Error]: section_type: PCIe error [ 289.093090] {1}[Hardware Error]: port_type: 4, root port [ 289.093091] {1}[Hardware Error]: version: 1.16 [ 289.093093] {1}[Hardware Error]: command: 0x6010, status: 0x0143 [ 289.093094] {1}[Hardware Error]: device_id: 0000:00:01.0 [ 289.093095] {1}[Hardware Error]: slot: 0 [ 289.093096] {1}[Hardware Error]: secondary_bus: 0x03 [ 289.093097] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f02 [ 289.093098] {1}[Hardware Error]: class_code: 040600 [ 289.093378] {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 [ 289.093380] {1}[Hardware Error]: Error 1, type: fatal [ 289.093381] {1}[Hardware Error]: section_type: PCIe error [ 289.093382] {1}[Hardware Error]: port_type: 4, root port [ 289.093383] {1}[Hardware Error]: version: 1.16 [ 289.093384] {1}[Hardware Error]: command: 0x6010, status: 0x0143 [ 289.093386] {1}[Hardware Error]: device_id: 0000:00:01.0 [ 289.093386] {1}[Hardware Error]: slot: 0 [ 289.093387] {1}[Hardware Error]: secondary_bus: 0x03 [ 289.093388] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f02 [ 289.093674] {1}[Hardware Error]: class_code: 040600 [ 289.093676] {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 [ 289.093678] Kernel panic - not syncing: Fatal hardware error! [ 289.093745] Kernel Offset: 0x1cc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 289.105835] ERST: [Firmware Warn]: Firmware does not respond in time. It does eventually restart after this. Then during the subsequent POST, the following warning appears: Embedded RAID 1 : Smart Array P440ar Controller - (2048 MB, V6.30) 7 Logical Drive(s) - Operation Failed - 1719-Slot 0 Drive Array - A controller failure event occurred prior to this power-up. (Previous lock up code = 0x13) Action: Install the latest controller firmware. If the problem persists, replace the controller. The latter's symptoms are described in https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04805565 but the running storage controller firmware is much newer than the doc's resolution. Neither of these problems occur during shutdown/reboot on the xenial kernel. FWIW, when running on old P89 (1.50 (07/20/2015) vs 2.56 (01/22/2018)), the shutdown failure mode was a loop like so: [529151.035267] NMI: IOCK error (debug interrupt?) for reason 75 on CPU 0. [529153.222883] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.222884] Do you have a strange power saving mode enabled? [529153.222884] Dazed and confused, but trying to continue [529153.554447] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.554448] Do you have a strange power saving mode enabled? [529153.554449] Dazed and confused, but trying to continue [529153.554450] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.554451] Do you have a strange power saving mode enabled? [529153.554452] Dazed and confused, but trying to continue [529153.554452] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.554453] Do you have a strange power saving mode enabled? [529153.554454] Dazed and confused, but trying to continue [529153.554454] Uhhuh. NMI received for unknown reason 35 on CPU 0. [529153.554455] Do you have a strange power saving mode enabled? [529153.554456] Dazed and confused, but trying to continue [529153.554457] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.554458] Do you have a strange power saving mode enabled? [529153.554458] Dazed and confused, but trying to continue [529153.554459] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529153.554460] Do you have a strange power saving mode enabled? [529153.554460] Dazed and confused, but trying to continue [529154.953916] Uhhuh. NMI received for unknown reason 25 on CPU 0. [529154.953917] Do you have a strange power saving mode enabled? [529154.953918] Dazed and confused, but trying to continue But upgrading to 2.56 changes that to a kernel panic. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-signed-image-generic 4.15.0.21.22 ProcVersionSignature: Ubuntu 4.15.0-21.22-generic 4.15.17 Uname: Linux 4.15.0-21-generic x86_64 AlsaDevices: total 0 crw-rw---- 1 root audio 116, 1 May 15 23:11 seq crw-rw---- 1 root audio 116, 33 May 15 23:11 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay' ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Wed May 16 00:17:53 2018 HibernationDevice: RESUME=UUID=696e8063-c668-4c89-a478-bfc23a450369 InstallationDate: Installed on 2016-06-01 (713 days ago) InstallationMedia: Ubuntu-Server 14.04.5 LTS "Trusty Tahr" - Beta amd64 (20160527) MachineType: HP ProLiant DL360 Gen9 PciMultimedia: ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 mgadrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21-generic root=UUID=6e6d422d-8ffb-4db3-b8c7-6c81e320b1b2 ro console=tty0 console=ttyS1,38400 nosplash console=ttyS1,38400 console=tty0 nosplash RelatedPackageVersions: linux-restricted-modules-4.15.0-21-generic N/A linux-backports-modules-4.15.0-21-generic N/A linux-firmware 1.173 RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to bionic on 2018-05-09 (6 days ago) dmi.bios.date: 01/22/2018 dmi.bios.vendor: HP dmi.bios.version: P89 dmi.board.name: ProLiant DL360 Gen9 dmi.board.vendor: HP dmi.chassis.type: 23 dmi.chassis.vendor: HP dmi.modalias: dmi:bvnHP:bvrP89:bd01/22/2018:svnHP:pnProLiantDL360Gen9:pvr:rvnHP:rnProLiantDL360Gen9:rvr:cvnHP:ct23:cvr: dmi.product.family: ProLiant dmi.product.name: ProLiant DL360 Gen9 dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1771467/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp