Thank you for dedicating some of your time to this matter! :)
Here is the requested output:
revisor@revisor-XPS-15-9560:~$ lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core
Processor Host Bridge/DRAM Registers [8086:5910] (rev 05)
Subsystem: Dell Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM
Registers [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16)
[8086:1901] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ec000000-ed0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:591b]
(rev 04) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:07be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake
Processor Thermal Subsystem [8086:1903] (rev 05)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor
Thermal Subsystem [1028:07be]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed120000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI
Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Dell Sunrise Point-H USB 3.0 xHCI Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at ed110000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H
Thermal subsystem [8086:a131] (rev 31)
Subsystem: Dell Sunrise Point-H Thermal subsystem [1028:07be]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ed138000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-H
Serial IO I2C Controller #0 [8086:a160] (rev 31)
Subsystem: Dell Sunrise Point-H Serial IO I2C Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed137000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-H
Serial IO I2C Controller #1 [8086:a161] (rev 31)
Subsystem: Dell Sunrise Point-H Serial IO I2C Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ed136000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME
HECI #1 [8086:a13a] (rev 31)
Subsystem: Dell Sunrise Point-H CSME HECI [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 138
Region 0: Memory at ed135000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA
Controller [AHCI mode] [8086:a103] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Sunrise Point-H SATA Controller [AHCI mode] [1028:07be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
Region 0: Memory at ed130000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at ed134000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at ed133000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root
Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ed200000-ed3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root
Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 123
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ed400000-eddfffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root
Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ede00000-edefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root
Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root
Port #15 [8086:a11e] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 125
Bus: primary=00, secondary=06, subordinate=3e, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d4000000-ea0fffff
Prefetchable memory behind bridge: 0000000090000000-00000000b1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller
[8086:a152] (rev 31)
Subsystem: Dell Sunrise Point-H LPC Controller [1028:07be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC
[8086:a121] (rev 31)
Subsystem: Dell Sunrise Point-H PMC [1028:07be]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at ed12c000 (32-bit, non-prefetchable) [disabled]
[size=16K]
00:1f.3 Audio device [0403]: Intel Corporation CM238 HD Audio Controller
[8086:a171] (rev 31) (prog-if 80)
Subsystem: Dell CM238 HD Audio Controller [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 140
Region 0: Memory at ed128000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ed100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev
31)
Subsystem: Dell Sunrise Point-H SMBus [1028:07be]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at ed132000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GP107M [GeForce GTX 1050
Mobile] [10de:1c8d] (rev a1)
Subsystem: Dell GP107M [GeForce GTX 1050 Mobile] [1028:07be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [disabled] [size=128]
Expansion ROM at ed000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidiafb, nouveau
02:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless
Network Adapter [168c:003e] (rev 32)
Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network
Adapter [1a56:1535]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 139
Region 0: Memory at ed200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI
Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader [1028:07be]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
Region 1: Memory at ed400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
04:00.0 Non-Volatile memory controller [0108]: Device [1c5c:1285] (prog-if 02
[NVM Express])
Subsystem: Device [1c5c:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ede00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1785715
Title:
ubuntu hynix ssd I/O Errors after some minutes
Status in linux package in Ubuntu:
Confirmed
Bug description:
Maybe similar to Bug 1678184
Im working on ubuntu 18.04 (with Kernel 4.15.0-29-generic) on a dell XPS
15-9560
After 20 - 180 Minutes the graphical interface hangs up (i can switch
workspaces, but not much else) and entering commands like "ls" yields bash:
input/output error
Reboot is impossible via the command or the button. Short click on power
button gives me a TTY like view prompting errors for nvme0 ext4 file system
errors (i will post more exact text on next hangup)
The hangups appear randomly, but often during shutting the lid or plugging in
power cable, which makes me thing it might be something with ssd power states.
For that reason i added grub parameters like
"nvme_core.default_ps_max_latency_us=3000" (see Bug 1678184) and ended up fully
disabling APST by setting it to 0, but the bug still occured.
sudo nvme id-ctrl /dev/nvme0 yields:
NVME Identify Controller:
vid : 0x1c5c
ssvid : 0x1c5c
sn : EJ75N621210105PBR
mn : PC300 NVMe SK hynix 1TB
fr : 20005A00
rab : 1
ieee : ace42e
cmic : 0
mdts : 5
cntlid : 0
ver : 10200
rtd3r : 90f560
rtd3e : ea60
oaes : 0
ctratt : 0
oacs : 0x16
acl : 3
aerl : 3
frmw : 0x16
lpa : 0x2
elpe : 254
npss : 4
avscc : 0x1
apsta : 0x1
wctemp : 361
cctemp : 363
mtfa : 0
hmpre : 0
hmmin : 0
tnvmcap : 0
unvmcap : 0
rpmbs : 0
edstt : 60
dsto : 1
fwug : 0
kas : 0
hctma : 0
mntmt : 0
mxtmt : 0
sanicap : 0
hmminds : 0
hmmaxd : 0
sqes : 0x66
cqes : 0x44
maxcmd : 0
nn : 1
oncs : 0x1e
fuses : 0
fna : 0
vwc : 0x1
awun : 255
awupf : 0
nvscc : 1
acwu : 0
sgls : 0
subnqn :
ioccsz : 0
iorcsz : 0
icdoff : 0
ctrattr : 0
msdbd : 0
ps 0 : mp:5.87W operational enlat:5 exlat:5 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 1 : mp:2.40W operational enlat:30 exlat:30 rrt:1 rrl:1
rwt:1 rwl:1 idle_power:- active_power:-
ps 2 : mp:1.90W operational enlat:100 exlat:100 rrt:2 rrl:2
rwt:2 rwl:2 idle_power:- active_power:-
ps 3 : mp:0.1000W non-operational enlat:1000 exlat:1000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0060W non-operational enlat:1000 exlat:5000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
sudo nvme get-feature -f 0x0c -H /dev/nvme0 yields:
get-feature:0xc (Autonomous Power State Transition), Current value:00000000
Autonomous Power State Transition Enable (APSTE): Disabled
Auto PST Entries .................
Entry[ 0]
.................
Idle Time Prior to Transition (ITPT): 0 ms
Idle Transition Power State (ITPS): 0
.................
Entry[ 1]
.................
Idle Time Prior to Transition (ITPT): 0 ms
Idle Transition Power State (ITPS): 0
... and so on ...
---
ProblemType: Bug
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: revisor 1593 F.... pulseaudio
CurrentDesktop: ubuntu:GNOME
DistroRelease: Ubuntu 18.04
HibernationDevice: RESUME=UUID=1bc0493d-0592-40d4-b0f4-938fbe12a990
InstallationDate: Installed on 2018-07-12 (25 days ago)
InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426)
Lsusb:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f3:24a1 Elan Microelectronics Corp.
Bus 001 Device 002: ID 0cf3:e300 Atheros Communications, Inc.
Bus 001 Device 004: ID 0c45:6713 Microdia
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Dell Inc. XPS 15 9560
NonfreeKernelModules: nvidia_modeset nvidia
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic
root=UUID=70377f6e-8c1c-4316-bded-c738410879ab ro quiet splash
nvme_core.default_ps_max_latency_us=0 vt.handoff=1
ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18
RelatedPackageVersions:
linux-restricted-modules-4.15.0-29-generic N/A
linux-backports-modules-4.15.0-29-generic N/A
linux-firmware 1.173.1
Tags: bionic
Uname: Linux 4.15.0-29-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 07/05/2018
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.10.1
dmi.board.name: 05FFDN
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr1.10.1:bd07/05/2018:svnDellInc.:pnXPS159560:pvr:rvnDellInc.:rn05FFDN:rvrA00:cvnDellInc.:ct10:cvr:
dmi.product.family: XPS
dmi.product.name: XPS 15 9560
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1785715/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
